JFCalibration/CuFluo_exposure_both_speeds.sh

#!/bin/bash

# to run do: bash CuFluo_exposure.sh

# prerequisites:
# - the hostname is set
# - export PATH=/afs/psi.ch/project/sls_det_software/latest_slsDetectorPackage/build/bin:$PATH
# - export LD_LIBRARY_PATH=/afs/psi.ch/project/sls_det_software/latest_slsDetectorPackage/build/bin:$LD_LIBRARY_PATH
# - detector is on
# - source filename_creator.sh # 
# - source pccalib.sh [pc] (mpc2012/pc-jungfrau-test)
# - xray tube is on and ramped for 40 kV, 60 mA, set to Cu

if [[ "$0" == *"CuFluo_exposure_both_speeds.sh"* ]]; then
    echo "script changes env. variables: should be invoked with source, not sh "    
    exit
    
fi

if [ ! -v $1 ]; then
    echo $0
    echo "printing filenames for module " $1

    source filename_creator.sh $1 N

    shutter=1 

    sls_detector_put stop #just in case

    sls_detector_put powerchip 1


    sls_detector_put period 0.002
    sls_detector_put exptime 0.000010
    sls_detector_put highvoltage 200

    # configure for receiver on mpc2012/pc-jungfrau-test/mpc2198/mpc3282
    # source pccalib.sh [pc] (mpc2012/pc-jungfrau-test/mpc2198/mpc3282)

    sls_detector_put udp_dstport 32410
    sls_detector_put udp_dstip $DSTIP #10.1.4.105
    sls_detector_put udp_dstmac $DSTMAC #3C:FD:FE:A2:14:D8 
    sls_detector_put udp_srcip $SRCIP #10.1.4.9
    sls_detector_put udp_srcmac 00:ab:be:cc:dd:e2


    sls_detector_put readoutspeed half_speed #half_speed
    #sls_detector_put reg 0x59 0x1310 #0001 0011 0001 0000

    #sls_detector_put readoutspeed 0 
    #sls_detector_put reg 0x59 0x0100 #0000 0001 0000 0000
 
    KILLRCV="killall ju_udp_receiver_3threads_2_0"
    $KILLRCV

    #CLI=/afs/psi.ch/project/sls_det_software/bin/sl7_binaries_to_be_removed_soon/xrayClient_sl7 #/vacuumClient_sl7
    CLI=/afs/psi.ch/project/sls_det_software/bin/xrayClient_sl8 #/vacuumClient_sl7
    $CLI setv 40
    $CLI setc 60
    $CLI HV on

    sls_detector_put clearbit 0x5d 0
    #sls_detector_put vref_prech 1000
    #sls_detector_put vref_ds 1100


    $CLI shutter $shutter off #$CLI shutter 1 off
    echo "warmin up the board"
    sls_detector_put frames 40000
    sls_detector_put start
    sleep 81
    sls_detector_put stop

    echo "end of board warm up"

    sls_detector_put frames 1000
    $KILLRCV
    sleep 1
    $TKPG0 &
    sleep 5
    echo "recording G0 pede"
    sls_detector_put start
    sleep 3
    # 1000 frames at 500 frames per second takes 2s

    echo "recording G1 pede"
    sls_detector_put gainmode forceswitchg1
    sls_detector_put start
    sleep 3

    echo "recording G2 pede"
    sls_detector_put gainmode forceswitchg2
    sls_detector_put start
    sleep 3

    sls_detector_put gainmode dynamic

    $KILLRCV
    echo "closed G0 pede file and open the G0 CuFluo file"
    sleep 1
    $TKFG0 &
    sleep 5

    sls_detector_put frames 230000
    $CLI shutter $shutter on #$CLI shutter 1 on
    sleep 1
    sls_detector_put start
    sleep 470
    # 200k frames at 500 frames per second takes 400s
    $CLI shutter $shutter off #$CLI shutter 1 off


    $KILLRCV
    echo "closed G0 CuFluo file and open HG0 pede file"
    sleep 1 
    $TKPHG0 &
    sleep 3
    sls_detector_put settings highgain0
    #sls_detector_put vref_prech 1000
    #sls_detector_put vref_ds 1100
    sls_detector_put frames 1000

    echo "recording HG0 pede"
    sls_detector_put start
    sleep 3
    # 1000 frames at 500 frames per second takes 2s


    $KILLRCV
    echo "closed HG0 pede file and open the HG0 CuFluo file"
    sleep 1
    $TKFHG0 &
    sleep 5 

    sls_detector_put frames 230000
    $CLI shutter $shutter on #$CLI shutter 1 on
    sleep 1
    sls_detector_put start 
    sleep 470
    echo "finish exposure at half speed"
    # 200k frames at 500 frames per second takes 400s
    $CLI shutter $shutter off #$CLI shutter 1 off
    sleep 2
    echo "close shutter"
    $KILLRCV
    sleep 1
    # source filename creator to save data in fullspeed folder

    source filename_creator.sh $1"_fullspeed" N

    # set detector for full speed
    sls_detector_put readoutspeed full_speed
    sleep 1

    sls_detector_put clearbit 0x5d 0
    #sls_detector_put vref_prech 1000
    #sls_detector_put vref_ds 1100
    
    sls_detector_put frames 1000
    $TKPG0 &
    sleep 5
    echo "recording G0 pede"
    sls_detector_put start
    sleep 3
    # 1000 frames at 500 frames per second takes 2s

    echo "recording G1 pede"
    sls_detector_put gainmode forceswitchg1
    sls_detector_put start
    sleep 3

    echo "recording G2 pede"
    sls_detector_put gainmode forceswitchg2
    sls_detector_put start
    sleep 3

    sls_detector_put gainmode dynamic

    $KILLRCV
    echo "closed G0 pede file and open the G0 CuFluo file"
    sleep 1
    $TKFG0 &
    sleep 5

    sls_detector_put frames 230000
    $CLI shutter $shutter on #$CLI shutter 1 on
    sleep 1
    sls_detector_put start
    sleep 470
    # 200k frames at 500 frames per second takes 400s
    $CLI shutter $shutter off #$CLI shutter 1 off


    $KILLRCV
    echo "closed G0 CuFluo file and open HG0 pede file"
    sleep 1 
    $TKPHG0 &
    sleep 5
    sls_detector_put settings highgain0
    #sls_detector_put vref_prech 1000
    #sls_detector_put vref_ds 1100

    sls_detector_put frames 1000

    echo "recording HG0 pede"
    sls_detector_put start
    sleep 3
    # 1000 frames at 500 frames per second takes 2s


    $KILLRCV
    echo "closed HG0 pede file and open the HG0 CuFluo file"
    sleep 1
    $TKFHG0 &
    sleep 5

    sls_detector_put frames 230000
    $CLI shutter $shutter on #$CLI shutter 1 on
    sleep 1
    sls_detector_put start 
    sleep 470
    # 200k frames at 500 frames per second takes 400s
    $CLI shutter $shutter off #$CLI shutter 1 off
    sleep 2
    $KILLRCV



    sls_detector_put highvoltage 0
    sls_detector_put clearbit 0x5d 0


    echo "Script finished"

else
    echo "Specify module number as a first argument"
    echo "Script finished"
fi