diff --git a/csaxs_bec/device_configs/ptycho_flomni.yaml b/csaxs_bec/device_configs/ptycho_flomni.yaml
index 00344e9e..ab3643df 100644
--- a/csaxs_bec/device_configs/ptycho_flomni.yaml
+++ b/csaxs_bec/device_configs/ptycho_flomni.yaml
@@ -661,64 +661,64 @@ calculated_signal:
 # without also confirming (e.g. restarting the device server) that the other device has
 # actually dropped its connection.
 #
-# Currently: Mode A active, Mode B commented out (switched back 2026-09-15 for A/B
-# comparison testing after confirming Mode B works end-to-end; Mode B speed testing beyond
-# 100 Hz is still TODO).
-omny_panda:
-  readoutPriority: async
-  deviceClass: csaxs_bec.devices.panda_box.panda_box_omny.PandaBoxOMNY
-  deviceConfig:
-    host: omny-panda.psi.ch
-    signal_alias:
-      FMC_IN.VAL1.Min: cap_voltage_fzp_y_min
-      FMC_IN.VAL1.Max: cap_voltage_fzp_y_max
-      FMC_IN.VAL1.Mean: cap_voltage_fzp_y_mean
-      FMC_IN.VAL2.Min: cap_voltage_fzp_x_min
-      FMC_IN.VAL2.Max: cap_voltage_fzp_x_max
-      FMC_IN.VAL2.Mean: cap_voltage_fzp_x_mean
-      INENC1.VAL.Max: interf_st_fzp_y_max
-      INENC1.VAL.Mean: interf_st_fzp_y_mean
-      INENC1.VAL.Min: interf_st_fzp_y_min
-      INENC2.VAL.Max: interf_st_fzp_x_max
-      INENC2.VAL.Mean: interf_st_fzp_x_mean
-      INENC2.VAL.Min: interf_st_fzp_x_min
-      INENC3.VAL.Max: interf_st_rotz_max
-      INENC3.VAL.Mean: interf_st_rotz_mean
-      INENC3.VAL.Min: interf_st_rotz_min
-      INENC4.VAL.Max: interf_st_rotx_max
-      INENC4.VAL.Mean: interf_st_rotx_mean
-      INENC4.VAL.Min: interf_st_rotx_min
-      PCAP.GATE_DURATION.Value: pcap_gate_duration_value
-  enabled: true
-  readOnly: false
-  softwareTrigger: false
-  deviceTags:
-    - ptycho_flomni
-
-# omny_panda_continuous:
+# Currently: Mode B active for speed testing beyond the initial 100 Hz, Mode A commented out
+# (both modes confirmed working end-to-end 2026-09-15; this swap 2026-09-15 is for Mode B
+# speed testing specifically).
+# omny_panda:
 #   readoutPriority: async
 #   deviceClass: csaxs_bec.devices.panda_box.panda_box_omny.PandaBoxOMNY
 #   deviceConfig:
 #     host: omny-panda.psi.ch
-#     raw_stream_mode: true
 #     signal_alias:
-#       FMC_IN.VAL1.Value: cap_voltage_fzp_y
-#       FMC_IN.VAL2.Value: cap_voltage_fzp_x
-#       INENC1.VAL.Value: interf_st_fzp_y
-#       INENC2.VAL.Value: interf_st_fzp_x
-#       INENC3.VAL.Value: interf_st_rotz
-#       INENC4.VAL.Value: interf_st_rotx
+#       FMC_IN.VAL1.Min: cap_voltage_fzp_y_min
+#       FMC_IN.VAL1.Max: cap_voltage_fzp_y_max
+#       FMC_IN.VAL1.Mean: cap_voltage_fzp_y_mean
+#       FMC_IN.VAL2.Min: cap_voltage_fzp_x_min
+#       FMC_IN.VAL2.Max: cap_voltage_fzp_x_max
+#       FMC_IN.VAL2.Mean: cap_voltage_fzp_x_mean
+#       INENC1.VAL.Max: interf_st_fzp_y_max
+#       INENC1.VAL.Mean: interf_st_fzp_y_mean
+#       INENC1.VAL.Min: interf_st_fzp_y_min
+#       INENC2.VAL.Max: interf_st_fzp_x_max
+#       INENC2.VAL.Mean: interf_st_fzp_x_mean
+#       INENC2.VAL.Min: interf_st_fzp_x_min
+#       INENC3.VAL.Max: interf_st_rotz_max
+#       INENC3.VAL.Mean: interf_st_rotz_mean
+#       INENC3.VAL.Min: interf_st_rotz_min
+#       INENC4.VAL.Max: interf_st_rotx_max
+#       INENC4.VAL.Mean: interf_st_rotx_mean
+#       INENC4.VAL.Min: interf_st_rotx_min
 #       PCAP.GATE_DURATION.Value: pcap_gate_duration_value
-#       # TTLIN1 (detector trigger) feeds both blocks below - confirmed 2026-09-15 against the
-#       # omny-panda hardware, see docs/developer/panda_box_free_running_setup.md. PCAP.BITS0
-#       # is a shared 32-bit word; PandaBoxOMNY masks it to bit 0 (TTLIN1.VAL) before
-#       # publishing gate_detector_active. COUNTER1 counts TTLIN1's falling edge, i.e. one
-#       # increment per completed exposure; it also doubles as the on_complete signal. Confirmed
-#       # working end-to-end 2026-09-15; speed testing beyond the initial 100 Hz is still TODO.
-#       PCAP.BITS0.Value: gate_detector_active
-#       COUNTER1.OUT.Value: frame_counter
 #   enabled: true
 #   readOnly: false
 #   softwareTrigger: false
 #   deviceTags:
 #     - ptycho_flomni
+
+omny_panda_continuous:
+  readoutPriority: async
+  deviceClass: csaxs_bec.devices.panda_box.panda_box_omny.PandaBoxOMNY
+  deviceConfig:
+    host: omny-panda.psi.ch
+    raw_stream_mode: true
+    signal_alias:
+      FMC_IN.VAL1.Value: cap_voltage_fzp_y
+      FMC_IN.VAL2.Value: cap_voltage_fzp_x
+      INENC1.VAL.Value: interf_st_fzp_y
+      INENC2.VAL.Value: interf_st_fzp_x
+      INENC3.VAL.Value: interf_st_rotz
+      INENC4.VAL.Value: interf_st_rotx
+      PCAP.GATE_DURATION.Value: pcap_gate_duration_value
+      # TTLIN1 (detector trigger) feeds both blocks below - confirmed 2026-09-15 against the
+      # omny-panda hardware, see docs/developer/panda_box_free_running_setup.md. PCAP.BITS0
+      # is a shared 32-bit word; PandaBoxOMNY masks it to bit 0 (TTLIN1.VAL) before
+      # publishing gate_detector_active. COUNTER1 counts TTLIN1's falling edge, i.e. one
+      # increment per completed exposure; it also doubles as the on_complete signal. Confirmed
+      # working end-to-end 2026-09-15; now under speed testing beyond the initial 100 Hz.
+      PCAP.BITS0.Value: gate_detector_active
+      COUNTER1.OUT.Value: frame_counter
+  enabled: true
+  readOnly: false
+  softwareTrigger: false
+  deviceTags:
+    - ptycho_flomni