From 798486b2e66c84eb22dcd5c44f1c23daebbd719f Mon Sep 17 00:00:00 2001 From: x12sa Date: Fri, 26 Jun 2026 14:34:08 +0200 Subject: [PATCH] fix in documentation --- docs/user/ptychography/flomni.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/user/ptychography/flomni.md b/docs/user/ptychography/flomni.md index 40948da..1de6bcb 100644 --- a/docs/user/ptychography/flomni.md +++ b/docs/user/ptychography/flomni.md @@ -62,7 +62,7 @@ _To bypass the fine alignment: `flomni.feye_out`_ 1. `flomni.tomo_parameters()` Adjust the ptychographic scan parameters for performing an alignment scan. Typically FOVX = FOVX(Xrayeye)+20 mu, shell step = beamsize/2.5, number of projections and tomo mode are ignored in the alignment scans. -1. `flomni.tomo_alignment_scan()` perform the alignment scan. When the first scan is running, switch to a matlab session and run `SPEC_ptycho_align` again. Click left and right. The third click can define the height of the scan, but is not needed and ignored by default. The widest horizontal field of view will be printed at the end of the matlab session. +1. `flomni.tomo_alignment_scan()` perform the alignment scan. When the first scan is running, switch to a matlab session and run `BEC_ptycho_align` again. Click left and right. The third click can define the height of the scan, but is not needed and ignored by default. The widest horizontal field of view will be printed at the end of the matlab session. 1. `flomni.read_alignment_offset()` Load alignment parameters calculated in matlab. ### Tomographic Measurement