diff --git a/csaxs_bec/devices/device_list.md b/csaxs_bec/devices/device_list.md
new file mode 100644
index 0000000..3d058e8
--- /dev/null
+++ b/csaxs_bec/devices/device_list.md
@@ -0,0 +1,37 @@
+// This file was autogenerated. Do not edit it manually.
+## Device List
+### Ophyd Devices (gitlab.psi.ch/bec/ophyd_devices)
+| Device | Documentation | Module |
+| :----- | :------------- | :------ |
+| InsertionDevice | Python wrapper for the CSAXS insertion device control
This wrapper provides a positioner interface for the ID control.
is completely custom XBPM with templates directly in the
VME repo. Thus it needs a custom ophyd template as well...
WARN: The x and y are not updated by the IOC
| InsertionDevice |
+| XbpmBase | Python wrapper for X-ray Beam Position Monitors
XBPM's consist of a metal-coated diamond window that ejects
photoelectrons from the incoming X-ray beam. These electons
are collected and their current is measured. Effectively
they act as four quadrant photodiodes and are used as BPMs
at the undulator beamlines of SLS.
Note: EPICS provided signals are read only, but the user can
change the beam position offset.
| XbpmBase |
+| XbpmCsaxsOp | Python wrapper for custom XBPMs in the cSAXS optics hutch
This is completely custom XBPM with templates directly in the
VME repo. Thus it needs a custom ophyd template as well...
WARN: The x and y are not updated by the IOC
| XbpmBase |
+| XbpmSim | Python wrapper for simulated X-ray Beam Position Monitors
XBPM's consist of a metal-coated diamond window that ejects
photoelectrons from the incoming X-ray beam. These electons
are collected and their current is measured. Effectively
they act as four quadrant photodiodes and are used as BPMs
at the undulator beamlines of SLS.
Note: EPICS provided signals are read only, but the user can
change the beam position offset.
This simulation device extends the basic proxy with a script that
fills signals with quasi-randomized values.
| XbpmBase |
+| DelayGeneratorcSAXS |
DG645 delay generator at cSAXS (multiple can be in use depending on the setup)
Default values for setting up DDG.
Note: checks of set calues are not (only partially) included, check manual for details on possible settings.
https://www.thinksrs.com/downloads/pdfs/manuals/DG645m.pdf
- delay_burst : (float >=0) Delay between trigger and first pulse in burst mode
- delta_width : (float >= 0) Add width to fast shutter signal to make sure its open during acquisition
- additional_triggers : (int) add additional triggers to burst mode (mcs card needs +1 triggers per line)
- polarity : (list of 0/1) polarity for different channels
- amplitude : (float) amplitude voltage of TTLs
- offset : (float) offset for ampltitude
- thres_trig_level : (float) threshold of trigger amplitude
Custom signals for logic in different DDGs during scans (for custom_prepare.prepare_ddg):
- set_high_on_exposure : (bool): if True, then TTL signal should go high during the full acquisition time of a scan.
# TODO trigger_width and fixed_ttl could be combined into single list.
- fixed_ttl_width : (list of either 1 or 0), one for each channel.
- trigger_width : (float) if fixed_ttl_width is True, then the width of the TTL pulse is set to this value.
- set_trigger_source : (TriggerSource) specifies the default trigger source for the DDG.
- premove_trigger : (bool) if True, then a trigger should be executed before the scan starts (to be implemented in on_pre_scan).
- set_high_on_stage : (bool) if True, then TTL signal should go high already on stage.
| delay_generator_csaxs |
+| Eiger9McSAXS |
Eiger9M detector for CSAXS
Parent class: PSIDetectorBase
class attributes:
custom_prepare_cls (FalconSetup) : Custom detector setup class for cSAXS,
inherits from CustomDetectorMixin
PSIDetectorBase.set_min_readout (float) : Minimum readout time for the detector
Various EpicsPVs for controlling the detector
| eiger9m_csaxs |
+| SLSDetectorCam | SLS Detector Camera - Pilatus
Base class to map EPICS PVs to ophyd signals.
| pilatus_csaxs |
+| EpicsDXPFalcon |
DXP parameters for Falcon detector
Base class to map EPICS PVs from DXP parameters to ophyd signals.
| falcon_csaxs |
+| FalconHDF5Plugins |
HDF5 parameters for Falcon detector
Base class to map EPICS PVs from HDF5 Plugin to ophyd signals.
| falcon_csaxs |
+| FalconcSAXS |
Falcon Sitoro detector for CSAXS
Parent class: PSIDetectorBase
class attributes:
custom_prepare_cls (FalconSetup) : Custom detector setup class for cSAXS,
inherits from CustomDetectorMixin
PSIDetectorBase.set_min_readout (float) : Minimum readout time for the detector
dxp (EpicsDXPFalcon) : DXP parameters for Falcon detector
mca (EpicsMCARecord) : MCA parameters for Falcon detector
hdf5 (FalconHDF5Plugins) : HDF5 parameters for Falcon detector
MIN_READOUT (float) : Minimum readout time for the detector
| falcon_csaxs |
+| FlomniSampleStorage | | flomni_sample_storage |
+| MCScSAXS | MCS card for cSAXS for implementation at cSAXS beamline | mcs_csaxs |
+| SIS38XX | SIS38XX card for access to EPICs PVs at cSAXS beamline | mcs_csaxs |
+| OMNYSampleStorage | | omny_sample_storage |
+| PilatuscSAXS | Pilatus_2 300k detector for CSAXS
Parent class: PSIDetectorBase
class attributes:
custom_prepare_cls (Eiger9MSetup) : Custom detector setup class for cSAXS,
inherits from CustomDetectorMixin
cam (SLSDetectorCam) : Detector camera
MIN_READOUT (float) : Minimum readout time for the detector
| pilatus_csaxs |
+| Bpm4i | | specMotors |
+| GirderMotorPITCH | Girder YAW pseudo motor | specMotors |
+| GirderMotorROLL | Girder ROLL pseudo motor | specMotors |
+| GirderMotorX1 | Girder X translation pseudo motor | specMotors |
+| GirderMotorY1 | Girder Y translation pseudo motor | specMotors |
+| GirderMotorYAW | Girder YAW pseudo motor | specMotors |
+| PmDetectorRotation | Detector rotation pseudo motor
Small wrapper to convert detector pusher position to rotation angle.
| specMotors |
+| PmMonoBender | Monochromator bender
Small wrapper to combine the four monochromator bender motors.
| specMotors |
+| Xeye | | xeye |
+| SmaractMotor | | smaract_ophyd |
+| Eiger1p5MDetector | | eiger1p5m |
+| FlomniGalilMotor | | fgalil_ophyd |
+| FuprGalilMotor | | fupr_ophyd |
+| LamniGalilMotor | | lgalil_ophyd |
+| SGalilMotor | "SGalil Motors at cSAXS have a
DC motor (y axis - vertical) - implemented as C
and a step motor (x-axis horizontal) - implemented as E
that require different communication for control
| sgalil_ophyd |
+| RtFlomniMotor | | rt_flomni_ophyd |
+| RtLamniMotor | | rt_lamni_ophyd |