diff --git a/docs/user/ptychography/flomni.md b/docs/user/ptychography/flomni.md
index ab49836..9af9aaa 100644
--- a/docs/user/ptychography/flomni.md
+++ b/docs/user/ptychography/flomni.md
@@ -51,7 +51,7 @@ After the sample transfer the sample stage moved to the measurement position wit
 If you see your sample already at the approximately correct height, you can skip steps 1 to 3. Otherwise adjust the height:
 
 1. `flomni.feedback_disable()` disable the closed loop operation to allow movement of coarse stages
-1. `umvr(dev.fsamy, 0.01)`, attention: unit <mm>, move the sample stage relative up (positive) or down (negative) until the sample is approximately vertically centered in xray eye screen
+1. `umvr_fsamy_tracked(0.01)`, attention: unit <mm>, move the sample stage relative up (positive) or down (negative) until the sample is approximately vertically centered in xray eye screen
 1. `flomni.xrayeye_update_frame()` will update the current image on the xray eye screen
 1. `flomni.xrayeye_alignment_start()` start the coarse alignment of the sample by measuring (clicking in the X-ray eye software) the sample position at its height and angles of 0, 45, 90, 135, 180 degrees. The GUI will present a fit of this data, which is automatically loaded to BEC for aligning the sample.