diff --git a/PixelatorControllerSettings.md b/PixelatorControllerSettings.md
index 5dffc39..14d40f4 100644
--- a/PixelatorControllerSettings.md
+++ b/PixelatorControllerSettings.md
@@ -126,7 +126,7 @@ Each of these settings files is described in a section below.
  [Axis](#axis)
 
  **controllerConfigFileName**::<BR>
-&emsp;[Controller](#controller)
+&emsp;[Controller](Config_Controller)
 
  **detectorConfigFileName**::<BR>
 &emsp;[Detector](#detector)
@@ -150,7 +150,7 @@ Each of these settings files is described in a section below.
 &emsp;[Polarization](#polarization)
 
  **positionerConfigFileName**::<BR>
-&emsp;[Positioner](#positioner)
+&emsp;[Positioner](Config_Positioner)
 
  **topupConfigFileName**::<BR>
 &emsp;**Optional**: no topup handling when this setting is missing or the file cannot be read. <BR>
@@ -162,61 +162,6 @@ Each of these settings files is described in a section below.
 ## Axis
 Definition of coordinate axes names to be referenced by positioners with the **axisName** setting.
 
-## Controller
-Definition of a set of hardware controllers.
-
- **type**::<BR>
-&emsp;String value that identifies which hardware interface will handle the controller behaviour. The set of allowed values is listed near the beginning of [`Controller.h`](https://gitlab.psi.ch/microspectro/pixelator/-/blob/master/PixelatorController/src/Controller.h#L19), for example:
-
-`enum Type { NewPort, NexLine, SmarAct, SmarActUsb, SmarActTcp, Orchestra, Galil, Zaber, ZmiEpics };`
-
- **active**::<BR>
-&emsp;Integer value that defines if the controller should be used (value of 1) or ignored (value of 0). <BR>
-&emsp;**Default**: 0
-
- **serverAddress**::<BR>
-&emsp;String value that defines the network address where the controller can be accessed. Used together with **serverPort**<BR>
-&emsp;**Default**: ?
-
- **serverPort**::<BR>
-&emsp;Integer value that defines the port over which the controller can be accessed. Used together with **serverAddress**<BR>
-&emsp;**Default**: ?
-
- **deviceName**::<BR>
-&emsp;String value that defines the filesystem path where the controller can be accessed. <BR>
-&emsp;**Default**: ?
-
- **timeout**::<BR>
-&emsp;Float value that defines the controller timeout. <BR>
-&emsp;**Default**: ?
-
- **loopName**::<BR>
-&emsp;String value that defines which Orchestra loop the controller is associated with. <BR>
-&emsp;**Default**: ?
-
- **nAxes**::<BR>
-&emsp;Integer value that defines the number of `axis` objects that the controller handles. <BR>
-&emsp;**Default**: ?
-
- **baudRate**::<BR>
-&emsp;Integer value that defines communication rate of the controller. <BR>
-&emsp;**Default**: ?
-
-
-## Detector
-Definitions of the set of detector hardware available.
-
- **active**::<BR>
-&emsp;Integer value that defines if the detector should be used (value of 1) or ignored (value of 0). <BR>
-&emsp;**Default**: 0
-
-
- **type**::<BR>
-&emsp;String value that identifies which hardware interface will handle the detector behaviour. The set of allowed values is listed near the beginning of [`Detector.h`](https://gitlab.psi.ch/microspectro/pixelator/-/blob/master/PixelatorController/src/Detector.h#L23), for example:
-
-`enum Type { Base, Counter, Analog, Interferometer, Orchestra, Epics, Tcp, Zmq };`
-
-
 
 ## Epics
 This file contains global epics settings.
@@ -349,5 +294,4 @@ See source:trunk/PixelatorController/config/pixelClock.json for an example.
 &emsp;Double value defines the timeout (in seconds) used in waitUntilDone(). running() is called until it returns false or until waitUntilDoneTimeout is exceeded.<BR>
 &emsp;**Default**: 10.0
 
-## Polarization
-
+## Polarization
\ No newline at end of file