
c      see w.eckstein , computer simulation of ion-solid interactions,
c                       springer series in material science, vol.10,
c                       springer, heidelberg, berlin 1991
c
c
c      input data (see table 6.1 in book above)
c
c      1. record [100 format(2F7.2,1F12.2,7F9.2)]
c      z1      atomic number of projectile
c      m1      mass (in amu) of projectile
c      e0      energy of projectile (in ev)
c              if e0.gt.0. the projectile has the fixed
c              energy e0
c              if e0.lt.0. a maxwellian velocity distribution for
c              the projectile is assumed with an ion
c              temperature ti=-e0
c              if e0.lt.0.and alpha.lt.0. a maxwellian energy
c              distribution for the projectile is assumed with an ion
c              temperature ti=-e0
c      esig    sigma of a gaussian energy distribution (in eV)
c              if esig.eq.0. then the particle energy is e0
c              if not then a gaussian energy distribution is used
c      alpha   angle of incidence (in degree) with respect to the
c              surface normal
c              if alpha.ge.0. the projectile impinges at the fixed
c              angle of incidence alpha
c              if alpha.gt.90. the projectile starts inside the solid
c              with an angle alpha (x0 should be larger than 0.)
c              if alpha.eq.-1. a random distribution of the projectile
c              is assumed
c              if alpha.lt.-2. a cosine distribution for the projectile
c              is assumed
c    alphasig  sigma of a gaussian distribution for alpha. If alpha >= 0. and
c              alphasig > 0. then a gaussian distribution for the angle of
c              incidence is used. 
c      ef      cutoff energy of projectiles (in ev)
c              ef must be larger than zero
c      esb     surface binding energies for projectiles (in ev)
c      sheath  sheath potential (in ev)
c              typically 3kT : sheath = 3 |e0|
c      erc     recoil cutoff energy; it is usually equal to the
c              surface binding energy (sbe); it can be applied to
c              cases, where erc.gt.sbe
c
c      2. record [101 format(I9,3F8.0,1F7.2,1F7.0,2F7.2,6I4,I3)]
c      nh      number of projectiles
c      ri      initial random number
c              necessary for an exact repetition of a calculation
c      ri2     initial random number for a gaussion energy distribution
c      ri3     initial random number for a gaussion distribution of alpha
c      x0      starting depth of projectile (in a)
c              if x0 is zero or negative the projectile starts at
c              x=-su=-2.*pmax. the uppermost target atoms are at
c              x=0. they do not form a complete layer, they are
c              distributed randomly
c      rd      depth to which recoils are followed
c              rd = 50 usually sufficient for sputtering if the
c              projectile energy is not too high
c              rd = 100 cw for following the full cascade
c      cw      depth interval for calculated depth distributions (in A)
c      ca      correction factor to the firsov screening length
c              for collisions between projectile and target atom
c              (only for application of moliere-potential)
c              usually ca = 1.00
c      kk0     maximum order of weak (simultaneous) collisions
c              between projectiles and target atoms. kk0 must be
c              between 0 and 4 (0 means no weak collisions included)
c      kk0r    maximum order of weak (simultaneous) collisions bet-
c              ween target atoms. kk0r must be between 0 and 4
c      kdee1   inelastic energy loss model for projectiles
c              =1   nonlocal, lindhard-scharff
c              =2   local, oen-robinson
c              =3   equipartition of 1 and 2
c              =4   nonlocal, andersen-ziegler tables for hydrogen
c              =5   nonlocal, ziegler tables for helium
c      kdee2   inelastic energy loss for target atoms
c              =1   nonlocal, lindhard-scharff
c              =2   local, oen-robinson
c              =3   equipartition of 1 and 2
c      ipot    interaction potential between projectile and target atom
c              =1   krypton-carbon potential
c              =2   moliere potential
c              =3   ziegler-biersack-littmark potential
c      ipotr   interaction potential between target atoms
c              =1   krypton-carbon potential
c              =2   moliere potential
c              =3   ziegler-biersack-littmark potential
c      irl     =0   no recoils are generated (no sputtering); to speed
c                   up the calculation if only ranges are of interest
c
c      3. record(for each of three layers) [102 format(3F9.2,6F7.2)]
c      dx(i)   layer thickness (in A)
c      rho(i)  layer density (in g cm{-3})
c      ck(i)   correction factor to the lindhard-scharff nonlocal
c              inelastic energy loss of the projectile
c
c      records 4 - 14 appear three times for each of the three
c      possible layers
c
c      4. record [103 format(5F9.4)]
c      z(i,j)  atomic number of target atoms (j<=5) in layer i
c
c      5. record [103 format(5F9.4)]
c      m(i,j)  mass (in amu) of target atoms (j<=5) in layer i
c
c      6. record [103 format(5F9.4)]
c      c(i,j)  concentration of target atoms (j<=5) in layer i
c
c      7. record [103 format(5F9.4)]
c      sbe(i,j)  surface binding energy of target atoms (j<=5)
c                in layer i
c
c      8. record [103 format(5F9.4)]
c      ed(i,j)  displacement energy of target atoms (j<=5) in layer i
c
c      9. record [103 format(5F9.4)]
c      be(i,j)  bulk binding energy of target atoms (j<=5) in layer i
c               usually always zero
c
c      10.-14.record    constants for the nonlocal inelastic energy
c                       loss given by the andersen ziegler tables for
c                       hydrogen or by the ziegler tables for helium
c      10. record [107 format(5F12.6)]
c      ch1(i,j) value A-1 of the ziegler tables
c      11. record [107 format(5F12.6)]
c      ch2(i,j) value A-2 of the ziegler tables
c      12. record [107 format(5F12.6)]
c      ch3(i,j) value A-3 of the ziegler tables
c      13. record [107 format(5F12.6)]
c      ch4(i,j) value A-4 of the ziegler tables
c      14. record [107 format(5F12.6)]
c      ch5(i,j) value A-5 of the ziegler tables
c
c
c
c      additional remarks
c
c      tt      target thickness should be chosen larger than the
c              range of projectiles if transmission is not of
c              interest
c
c      ed      for sputtering and backscattering calculations ed is
c              not of importance, only in determination of damage
c              profiles. ed is of the order of 30 ev
c
c      sheath  a sheath potential is only used for a maxwellian
c              distribution of projectiles (e0.lt.0.)
c
c      ef      for low projectile energies (lt 1000 ev) and esb=0.
c              ef should be of the order of 0.2 ev. with increasing
c              energy ef can be increased to save computing time,
c              but not above sbe (for sputtering data)
c
c      ca      the use of ca.ne.1 is only reasonable for the
c              application of the moliere potential
c
c      ri      with the same initial random number ri the calculation
c              will be exactly reproduced if nothing has been changed
c
c      esb     this value is zero for the noble gases but esb should
c              be larger than zero if the projectile is an active
c              chemically species. esb=sbe for selfsputtering cal-
c              culations
c
c      be      this value should be taken as zero (see j.p.biersack,
c              w.eckstein  appl.phys.34(1984)73)
c
c      sbe     the heat of sublimation should be used
c
c      kk0     usually kk0=2 is used. only for very heavy particles
c              kk0 may be increased to 3 or even 4 but on the ex-
c              pense of increasing computing time
c
c      kk0r    the same applies as for kk0
c
c      kdee1   usually kdee1=3 is used. kdee1=1,2,or 3 can only be
c              used at energies below the stopping power maximum.
c              for hydrogen kdee1=4 must be used for projectile
c              energies above 10 kev, for helium kdee1=5 must be
c              used for energies above 50 kev
c
c      kdee2   usually kdee2=3 is used. the stopping power maximum
c              for heavy atoms is well above 100 kev, so that only
c              kdee2=1,2,and 3 is available
c
c
c
c      output data
c
c      calculated constants
c      in the case of a maxwellian distribution three values
c      are given
c      ti      ion temperature
c      zarg    adjustment factor for the projectile mass
c      velc    adjustment factor for the sheath potential
c
c      hlm     distance above the surface (x=0.) , where an inelastic
c              energy loss can be taken into account. usually
c              hlm=0., but if inel.ne.0 then hlm=-.5*lm
c      hlmt    distance above the surface (x=tt) , where an inelastic
c              energy loss can be taken into account. usually
c              hlmt=tt, but if inel.ne.0 then hlmt=tt+0.5*lm
c      su1     su=2.*pmax(1)
c      su2     su=pmax(1)*(1.kk0)
c      sur     su=pmax(1)*(1.kk0r)
c      su      su=max(su1,su2,sur) , distance above the front surface, where
c                                    collisions are taken into account
c      sut     sut=tt+su , su calculated with pmax(l)
c                          distance outside the backsurface, where
c                          collisions are taken into account
c      xc      xc=-su , starting point above the surface
c      rt      rt=tt-rd , see rd
c      inel    inel=0 : no electronic energy loss outside the bulk
c              inel=1 : electronic energy loss outside the bulk for a
c                       distance 0.5*lm , see hlm and hlmt
c      l       number of layers
c      lj      number of target species
c
c      values for each layer
c      eps0(i) reduced projectile energy
c      z2(i)   mean atomic number of layer i
c      m2(i)   mean atomic mass of layer i
c      arho(i) density (atoms/A**3})
c      lm(i)   mean distance between collisions (A)
c      pmax(i) maximum impact parameter (A)
c      asig(i) constant for inelastic energy loss (atoms/A**2)
c      sb(i)   mean surface binding energy of layer i
c      xx(i)target thickness (A) of layer i
c      n(i)    number of target species in layer i
c      a1(i)   screening length for projectiles
c      kor1(i) constant in the local oen-robinson inelastic energy
c              loss for projectiles
c      a(i)    screening length for target atoms
c      kor(i)  constant in the local oen-robinson inelastic energy
c              loss for target atoms
c
cc     f1      constant to transfer the energy of a projectile into
cc             a reduced energy (eps)
cc     f(i,j)  constant to transfer the energy of a target atom into
cc             a reduced energy (epsr)
cc     ec      maximum transferable energy between projectile and
cc             target atom
c      sfe     minimum of the mean surface binding energies of
c              first and last layer (l=3); for one layer (l=1)
c              sfe=sb(1). sb(l) is the mean binding energy of layer (l)
c
c      values giving information about some loops in the calculation
c      nproj   number how often the projectile loop is entered
c      kib     number of backscattered projectiles which cannot overcome
c              the surface barrier (esb)
c      kit     number of transmitted projectiles which cannot overcome
c              the surface barrier (esb)
c      maxa    maximum number of simultaneously processed target atoms
c              in the vectorized target collision loop
c      nall    number of times the target atom collision loop has to
c              be passed
c      npa     number of primary knockon atoms
c      nsa     number of secondary knockon atoms
c      kis     number of sputtered target atoms which cannot overcome
c              the surface barrier (sbe)
c      kist    number of transmission sputtered target atoms which
c              cannot overcome the surface barrier (sbe)
c
c
c      calculated results
c
c      iim     number of transmitted projectiles
c      eim     energy of all transmitted projectiles
c      ib      number of reflected projectiles
c      eb      energy of all reflected projectiles
c      it      number of transmitted projectiles
c      et      energy of all transmitted projectiles
c      ibsp    number of backsputtered target atoms
c      ebsp    energy of all backsputtered target atoms
c      itsp    number of transmission sputtered target atoms
c      etsp    energy of all transmission sputtered target atoms
c
c      projectiles
c      avcsum  mean number of collisions
c      avcdis  mean number of collisions
c                   (transferred energy > displacement energy)
c      avcsms  mean number of collisions
c                   (transferred energy > mean surface binding energy)
c
c      penetration of projectiles
c
c      fix0    mean penetration depth , 1. moment
c      sex     variance of the depth distribution
c      thx     skewness of the depth distribution
c      fox     kurtosis of the depth distribution
c      sigmax  square root of the variance
c      dfix0   error of mean depth
c      dsex    error of the variance
c      dthx    error of the skewness
c
c      fir0    mean lateral spread of the penetration
c      ser     variance of the spread distribution
c      thr     skewness of the spread distribution
c      for     kurtosis of the spread distribution
c      sigmar  square root of the variance
c      dfir0   error of mean spread
c      dser    error of the variance
c      dthr    error of the skewness
c
c      fip0    mean pathlength
c      sep     variance of the pathlength distribution
c      thp     skewness of the pathlength distribution
c      fop     kurtosis of the pathlength distribution
c      sigmap  square root of the variance
c      dfip0   error of mean pathlength
c      dsep    error of the variance
c      dthp    error of the skewness
c
c      avnli   mean elastic loss
c      vanli   variance of the elastic loss distribution
c      signli  square root of the variance
c      dfinli  error in the mean elastic loss
c
c      avili   mean electronic loss
c      vaili   variance of the electronic loss distribution
c      sigili  square root of the variance
c      dfiili  error in the mean electronic loss
c
c      fie0    mean nuclear energy loss
c      see     variance of the nuclear energy loss distribution
c      the     skewness of the nuclear energy loss distribution
c      foe     kurtosis of the nuclear energy loss distribution
c      sigmae  square root of the variance
c      dfie0   error of mean nuclear energy loss
c      dsee    error of the variance
c      dthe    error of the skewness
c
c      fiw0    mean nuclear energy loss in weak collisions
c      sew     variance
c      thw     skewness
c      fow     kurtosis
c      sigmaw  square root of the variance
c      dfiw0   error of mean
c      dsew    error of the variance
c      dthw    error of the skewness
c
c      fii0    mean electronic energy loss
c      sei     variance
c      thi     skewness
c      foi     kurtosis
c      sigmai  square root of the variance
c      dfii0   error of mean
c      dsei    error of the variance
c      dthi    error of the skewness
c
c      fis0    mean nuclear energy loss in subthreshold collisions
c      ses     variance
c      ths     skewness
c      fos     kurtosis
c      sigmas  square root of the variance
c      dfis0   error of mean
c      dses    error of the variance
c      dths    error of the skewness
c
c      x1sd    1.moment of the penetration depth distribution
c      x2sd    2.moment of the penetration depth distribution
c      x3sd    3.moment of the penetration depth distribution
c      x4sd    4.moment of the penetration depth distribution
c      x5sd    5.moment of the penetration depth distribution
c      x6sd    6.moment of the penetration depth distribution
c
c      recoiles created by recoils normalized to the number of
c      projectiles (hn)
c      acsumr  mean number of collisions
c      acdisr  mean number of collisions
c                   (transferred energy > displacement energy)
c      acsber  mean number of collisions
c                   (transferred energy > mean surface binding energy)
c
c      recoiles created by recoils normalized to the number of
c      knockons (npa+nsa)
c      acsur   mean number of collisions
c      acdir   mean number of collisions
c                   (transferred energy > displacement energy)
c      acsbr   mean number of collisions
c                   (transferred energy > mean surface binding energy)
c      acdr11  mean number of collisions between species 1 and 1 in
c              layer 1 (transferred energy > displacement energy)
c      acdr12  mean number of collisions between species 1 and 2 in
c              layer 1 (transferred energy > displacement energy)
c      acdr21  mean number of collisions between species 2 and 1 in
c              layer 1 (transferred energy > displacement energy)
c      acdr22  mean number of collisions between species 2 and 2 in
c              layer 1 (transferred energy > displacement energy)
c
c      depth distributions (projectiles)
c      d1,d2     lower and upper limit of depth interval
c                100 intervals, in steps of cw (in A)
c      irp(i)    number of implanted projectiles in interval i
c                , 'particles'
c      rirp(i)   implantation profile normalized to all implanted
c                projectiles (norm.distr) , 'norm.depth'
c      ipl(i)    number of projectiles with pathlength in interval i
c                , 'pathlength'
c      ion(i)    electronic energy loss (ev) , 'inloss'
c      dent(i)   total nuclear energy loss (ev), (central collision +
c                weak collisions) , 'teloss'
c      dmgn(i)   nuclear energy loss (ev), (central collision only)
c                , 'elloss'
c      elgd(i)   nuclear energy loss (ev) larger than the displacement
c                energy ed (central collision only) , 'damage'
c      phon(i)   nuclear energy loss smaller than the displacement
c                energy (ev), energy into phonons , 'phonon'
c      casmot(i) defect producing energy (ev)  (see biersack and
c                haggmark nim 174 (1980) 257) , 'cascad'
c      icdt(i)   number of displacements (collisions gt ed) , 'dpa'
c      ele(i,j)  nuclear energy loss of projectile to species j
c                (central collision only)
c      eli(i,j)  electronic energy loss of species j
c      eld(i,j)  nuclear energy loss larger than the displacement
c                energy for projectiles to species j
c                (central collision only)
c      elp(i,j)  nuclear energy loss lower than the displacement
c                energy for species j (central collision only)
c      icd(i,j)  number of displacements of species j
c
c      depth distributions (recoils)
c      ionr(i)   inelastic energy loss (ev) by target atoms , 'inloss'
c      dentr(i)  total nuclear energy loss (ev) , (central collision +
c                weak collisions) , 'teloss'
c      dmgnr(i)  elastic energy loss (ev) by target atoms (central
c                collisions only) , 'elloss'
c      eler(i,j) nuclear energy loss of recoils to species j
c                (central collision only)
c      elir(i,j) electronic energy loss of species j
c      eldr(i,j) nuclear energy loss larger than the displacement
c                energy for species j (central collision only)
c      elpr(i,j) nuclear energy loss lower than the displacement
c                energy for species j (central collision only)
c      icdr(i,j) number of displacements of species j
c      icdiri(i,j,k) number of displacements of species k by species j
c
c                the last line gives the sum over the distributions
c
c
c      backscattered projectiles
c
c      rn      particle reflection coefficient
c      emean   mean energy of backscattered projectiles
c      emeanr  relative mean energy of backscattered projectiles
c      re      energy reflection coefficient
c
c      fib0    mean energy of backscattered projectiles
c      seb     variance
c      thb     skewness
c      fob     kurtosis
c      sigmab  square root of the variance
c      dfib0   error of mean
c      dseb    error of the variance
c      dthb    error of the skewness
c
c      fipb0   mean pathlength of backscattered projectiles
c      sepb    variance
c      tphb    skewness
c      fpob    kurtosis
c      sigmpb  square root of the variance
c      dfipb0  error of mean
c      dsepb   error of the variance
c      dthpb   error of the skewness
c
c      avnlb   mean elastic loss
c      vanlb   variance of the elastic loss distribution
c      signlb  square root of the variance
c      dfinlb  error in the mean elastic loss
c
c      avilb   mean electronic loss
c      vailb   variance of the electronic loss distribution
c      sigilb  square root of the variance
c      dfiilb  error in the mean electronic loss
c
c      eb1b    1.moment of the energy distr. of backsc. proj.
c      eb2b    2.moment of the energy distr. of backsc. proj.
c      eb3b    3.moment of the energy distr. of backsc. proj.
c      eb4b    4.moment of the energy distr. of backsc. proj.
c      eb5b    5.moment of the energy distr. of backsc. proj.
c      eb6b    6.moment of the energy distr. of backsc. proj.
c
c      eb1bl   1.logarithmic moment of the energy distr.
c      eb2bl   2.logarithmic moment of the energy distr.
c      eb3bl   3.logarithmic moment of the energy distr.
c      eb4bl   4.logarithmic moment of the energy distr.
c      eb5bl   5.logarithmic moment of the energy distr.
c      eb6bl   6.logarithmic moment of the energy distr.
c
c      pl1s    1.moment of the pathlength distribution
c      pl2s    2.moment of the pathlength distribution
c      pl3s    3.moment of the pathlength distribution
c      pl4s    4.moment of the pathlength distribution
c      pl5s    5.moment of the pathlength distribution
c      pl6s    6.moment of the pathlength distribution
c
c
c      transmitted projectiles
c
c      tn      particle transmission coefficient
c      emeant  mean energy of transmitted projectiles
c      tmeanr  relative mean energy of transmitted projectiles
c      te      energy transmission coefficient
c
c      fit0    mean energy of transmitted projectiles
c      set     variance
c      tht     skewness
c      fot     kurtosis
c      sigmat  square root of the variance
c      dfit0   error of mean
c      dset    error of the variance
c      dtht    error of the skewness
c
c      fipt0   mean pathlength of transmitted projectiles
c      sept    variance
c      tpht    skewness
c      fpot    kurtosis
c      sigmpt  square root of the variance
c      dfipt0  error of mean
c      dsept   error of the variance
c      dthpt   error of the skewness
c
c      avnlt   mean elastic loss
c      vanlt   variance of the elastic loss distribution
c      signlt  square root of the variance
c      dfinlt  error in the mean elastic loss
c
c      avilt   mean electronic loss
c      vailt   variance of the electronic loss distribution
c      sigilt  square root of the variance
c      dfiilt  error in the mean electronic loss
c
c
c      backsputtered target atoms (for each species j)
c
c      ispa       total sputtering yield
c      espa       total sputtered energy
c      ispal(i)   sputtering yield of layer i
c      espal(i)   sputtered energy of layer i
c      spy(j)     sputtering yield of species j
c      spe(j)     sputtered energy of species j
c      rey(j)     relative mean energy of sputtered target atoms
c      emsp(j)    mean energy of sputtered target atoms
c
c      4 different processes for sputtering
c      ispip(j)   number of primary knock-on atoms, ion in
c      rip(j)     fraction of primary knock-on atoms, ion in
c                 normalized to all sputtered atoms
c      ripj(j)    fraction of primary knock-on
c                 normalized to sputtered atoms of species j
c      espip(j)   energy of primary knock-on atoms, ion in
c      reip(j)    fraction of energy of primary knock-on atoms, ion in
c                 normalized to energy of all sputtered atoms
c      reipj(j)   fraction of energy of primary knock-on atoms, ion in
c                 normalized to energy of sputtered atom species j
c      espmip(j)  mean energy of process (pka, ion in)
c      ispis(j)   number of secondary knock-on atoms, ion in
c      ris(j)     fraction of secondary knock-on atoms, ion in
c                 normalized to all sputtered atoms
c      risj(j)    fraction of secondary knock-on atoms, ion in
c                 normalized to sputtered atoms of species j
c      espis(j)   energy of secondary knock-on atoms,ion in
c      reis(j)    fraction of energy of secondary knock-on atoms, ion in
c                 normalized to energy of all sputtered atoms
c      reisj(j)   fraction of energy of secondary knock-on atoms, ion in
c                 normalized to energy of sputtered atom species j
c      espmis(j)  mean energy of process (ska, ion in)
c      ispop(j)   number of primary knock-on atoms, ion out
c      rop(j)     fraction of primary knock-on atoms, ion out
c                 normalized to all sputtered atoms
c      ropj(j)    fraction of primary knock-on atoms, ion out
c                 normalized to sputtered atoms of species j
c      espop(i)   energy of primary knock-on atoms, ion out
c      reop(j)    fraction of energy of primary knock-on atoms, ion out
c                 normalized to energy of all sputtered atoms
c      reopj(j)   fraction of energy of primary knock-on atoms, ion out
c                 normalized to energy of sputtered atom species j
c      espmop(j)  mean energy of process (pka, ion out)
c      ispos(j)   number of secondary knock-on atoms, ion out
c      ros(j)     fraction of secondary knock-on atoms, ion out
c                 normalized to all sputtered atoms
c      rosj(j)    fraction of secondary knock-on atoms, ion out
c                 normalized to sputtered atoms of species j
c      espos(j)   energy of secondary knock-on atoms, ion out
c      reos(j)    fraction of energy of secondary knock-on atoms, ion out
c                 normalized to energy of all sputtered atoms
c      reosj(j)   fraction of energy of secondary knock-on atoms, ion out
c                 normalized to energy of sputtered atom species j
c      espmos(j)  mean energy of process (ska, ion out)
c
c      fies0   mean energy of backsputtered target atoms
c      sees    variance
c      thes    skewness
c      foes    kurtosis
c      sigmes  square root of the variance
c      dfies0  error of mean
c      dsees   error of the variance
c      dthes   error of the skewness
c
c      ebsp1   1.moment of the energy distribution
c      ebsp2   2.moment of the energy distribution
c      ebsp3   3.moment of the energy distribution
c      ebsp4   4.moment of the energy distribution
c      ebsp5   5.moment of the energy distribution
c      ebsp6   6.moment of the energy distribution
c
c      ebsp1l  1.logarithmic moment of the energy distribution
c      ebsp2l  2.logarithmic moment of the energy distribution
c      ebsp3l  3.logarithmic moment of the energy distribution
c      ebsp4l  4.logarithmic moment of the energy distribution
c      ebsp5l  5.logarithmic moment of the energy distribution
c      ebsp6l  6.logarithmic moment of the energy distribution
c
c
c      transmission sputtered target atoms (for each species j)
c
c      ispat      total sputtering yield
c      espat      total sputtered energy
c      ispalt(i)  sputtering yield of layer i
c      espalt(i)  sputtered energy of layer i
c      spyt(j)    sputtering yield of species j
c      spet(j)    sputtered energy of species j
c      reyt(j)    relative mean energy of sputtered target atoms
c      emspt(j)   mean energy of sputtered target atoms
c
c      4 different processes for sputtering
c      ispipt(j)  number of primary knock-on atoms, ion in
c      ript(j)    fraction of primary knock-on atoms, ion in
c                 normalized to all sputtered atoms
c      espipt(j)  energy of primary knock-on atoms, ion in
c      reipt(j)   fraction of energy of primary knock-on atoms, ion in
c                 normalized to energy of all sputtered atoms
c      espmipt(j) mean energy of process (pka, ion in)
c      ispist(j)  number of secondary knock-on atoms, ion in
c      rist(j)    fraction of secondary knock-on atoms, ion in
c                 normalized to all sputtered atoms
c      espist(j)  energy of secondary knock-on atoms,ion in
c      reist(j)   fraction of energy of secondary knock-on atoms, ion in
c                 normalized to energy of all sputtered atoms
c      espmist(j) mean energy of process (ska, ion in)
c      ispopt(j)  number of primary knock-on atoms, ion out
c      ropt(j)    fraction of primary knock-on atoms, ion out
c                 normalized to all sputtered atoms
c      espopt(i)  energy of primary knock-on atoms, ion out
c      reopt(j)   fraction of energy of primary knock-on atoms, ion out
c                 normalized to energy of all sputtered atoms
c      espmopt(j) mean energy of process (pka, ion out)
c      ispost(j)  number of secondary knock-on atoms, ion out
c      rost(j)    fraction of secondary knock-on atoms, ion out
c                 normalized to all sputtered atoms
c      espost(j)  energy of secondary knock-on atoms, ion out
c      reost(j)   fraction of energy of secondary knock-on atoms, ion out
c                 normalized to energy of all sputtered atoms
c      espmost(j) mean energy of process (ska, ion out)
c
c
c      angular distributions
c
c      a(i)        20 equal cosine intervals of the polar exit angle
c      kadb(i)     number of reflected projectiles in interval i
c      rkadb(i)    fraction of reflected projectiles in interval i
c      kadt(i)     number of transmitted projectiles in interval i
c      rkadt(i)    fraction of transmitted projectiles in interval i
c      kads(i)     number of all sputtered target atoms in interval i
c      rkads(i)    fraction of all sputtered target atoms in interval i
c      kadsl(i,j)  number of sputtered atoms from layer j in interval i
c      rkadsl(i,j) fraction of sputtered atoms from layer j in interval i
c      kadsj(i,j)  number of sputtered species j in interval i
c      rkadsj(i,j) fraction of sputtered species j in interval i
c      kadst(i)    number of all transmission sputtered atoms in interval i
c      rkadst(i)   fraction of all transm. sputtered atoms in interval i
c      kdstl(i,j)  number of transm. sputtered atoms from layer j in interval i
c      rkdslt(i,j) fraction of transm. sputtered atoms from layer j in interval i
c      kdstj(i,j)  number of transm. sputtered species j in interval i
c      rkdstj(i,j) fraction of transm. sputtered species j in interval i
cc     kadrip(i)   number of sputtered primary knock-on atoms, ion in
cc     rkdrip(i)   fraction of sputtered primary knock-on atoms, ion in
cc     kadris(i)   number of sputtered secondary knock-on atoms, ion in
cc     rkdris(i)   fraction of sputtered  secondary knock-on atoms, ion in
cc     kadrop(i)   number of sputtered primary knock-on atoms, ion out
cc     rkdrop(i)   fraction of sputtered primary knock-on atoms, ion out
cc     kadros(i)   number of sputtered secondary knock-on atoms, ion out
cc     rkdros(i)   fraction of sputtered secondary knock-on atoms, ion out
c
c
c      2- and 3-dimensional distributions
c
c      the first row and the first column give the upper limit of
c      the interval
c      the last row gives the sum over the columns and
c      the last column gives the sum over the rows
c      the matrix-output is only given , if more than 10000 particles
c      are sputtered, reflected or transmitted
c
c                     backsputtered target atoms
c
c      meas(i,j,k)    number of sputtered target atoms versus energy
c                     (column) and polar emission angle (row)
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     polar angle interval j: cosine interval of 0.05,
c                     20 intervals
c                     10 target species k (2 layers)
c                     in the last interval (99-100 ev) all sputtered
c                     target atoms with energies above 100 ev are
c                     included
c                     dimension : meas(102,22,10)
c
c      mease(i,j,k)   number of sputtered target atoms versus energy
c                     (column) and polar emission angle (row)
c                     energy interval i: 1 ev , 100 intervals
c                     polar angle interval j: cosine interval of 0.05,
c                     20 intervals
c                     10 target species k (2 layers)
c                     in the last interval (99-100 ev) all sputtered
c                     target atoms with energies above 100 ev are
c                     included
c                     dimension : meas(102,22,10)
c
c      magsa(i,j,k)   number of sputtered target atoms versus azimuthal
c                     (column) and polar (row) emission angles
c                     azimuthal angle interval i: 3 deg, 60 intervals
c                     polar angle interval j: 3 deg, 30 intervals
c                     10 target species k (2 layers)
c                     dimension : magsa(62,32,10)	
c
c      measl(i,j,k)   number of sputtered target atoms versus energy
c                     (column) and polar emission angle (row)
c                     energy interval i: a decade is divided into 12
c                     equal logarithmic intervals from 0.1 to 10**5 ev
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     10 target species k (2 layers)
c                     the last column gives the number of sputtered
c                     atoms per ev, solid angle, and projectile
c                     dimension : measl(75,21,10)
c
c      easl(i,j)      logarithmic energy distribution (intensity per
c                     logarithmic energy interval)
c                     energy interval i: a decade is divided into 12
c                     equal logarithmic intervals from 0.1 to 10**5 ev
c                     10 target species j (2 layers)
c                     dimension : easl(75,10)
c
c      meags(i,j,k,l) number of sputtered target atoms versus energy
c                     (column), polar (row) and azimuthal (matrix)
c                     emission angles
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     polar angle interval k: cosine interval of 0.05,
c                     20 intervals
c                     azimuthal angle interval j: 15 deg, 12 matrices
c                     10 target species l (2 layers)
c                     these matrices are not calculated, if the angle
c                     of incidence, alpha, is smaller than 1 deg
c                     dimension : meags(102,12,22,10)
c
c      mags(i,j,k)    number of sputtered target atoms versus azimu-
c                     thal (column) and polar (row) emission angles
c                     dimension : mags(62,22,10)
c
c                     transmission sputtered target atoms
c
c      meast(i,j,k)   number of sputtered target atoms versus energy
c                     (column) and polar emission angle (row)
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     polar angle interval j: cosine interval of 0.05,
c                     20 intervals
c                     10 target species k (2 layers)
c                     in the last interval (99-100 ev) all sputtered
c                     target atoms with energies above 100 ev are
c                     included
c                     dimension : meast(102,22,10)
c
c      meastl(i,j,k)  number of sputtered target atoms versus energy
c                     (column) and polar emission angle (row)
c                     energy interval i: a decade is divided into 12
c                     equal logarithmic intervals from 0.1 to 10**5 ev
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     10 target species k (2 layers)
c                     the last column gives the number of sputtered
c                     atoms per ev, solid angle, and projectile
c                     dimension : meastl(75,21,10)
c
c      eastl(i,j)     logarithmic energy distribution (intensity per
c                     logarithmic energy interval)
c                     energy interval i: a decade is divided into 12
c                     equal logarithmic intervals from 0.1 to 10**5 ev
c                     10 target species j (2 layers)
c                     dimension : eastl(75,10)
c
c      magst(i,j,k)   number of sputtered target atoms versus azimu-
c                     thal (column) and polar (row) emission angles
c                     dimension : magst(62,22,10)
c
c                     backscattered projectiles
c
c      meab(i,j)      number of backscattered projectiles versus
c                     energy (column) and polar emission angle (row)
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     polar angle interval j: cosine interval of 0.05,
c                     20 intervals
c                     dimension : meab(102,22)
c
c      meabl(i,k)     number of backscattered projectiles versus
c                     energy (column) and polar emission angle (row)
c                     energy interval i: a decade is divided into 12
c                     equal logarithmic intervals from 0.1 to 10**5 ev
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     dimension : meabl(75,21)
c
c      meagb(i,j,k)   number of backscattered projectiles versus
c                     energy (column), polar (row) and azimuthal
c                     (matrix) emission angles
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     polar angle interval k: cosine interval of 0.05,
c                     20 intervals
c                     azimuthal angle interval j: 15 deg, 12 matrices
c                     10 target species l (2 layers)
c                     these matrices are not calculated, if the angle
c                     of incidence, alpha, is smaller than 1 deg
c                     dimension : meagb(102,12,22)
c
c      magb(i,j)      number of backscattered projectiles versus
c                     azimuthal (column) and polar (row) emission
c                     angles
c                     azimuthal angle interval i: 3 deg, 60 intervals
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     dimension : magb(62,22)
c
c      ema(i,j)       backscattered energy versus azimuthal (column)
c                     and polar (row) emission angles
c                     azimuthal angle interval i: 3 deg, 60 intervals
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     dimension : ema(62,22)
c
c      mepb(i,j)      number of backscattered projectiles versus
c                     energy (column) and pathlength (row)
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     pathlength interval j: cw , 100 intervals
c                     dimension : mepb(102,102)
c
c                     transmitted projectiles
c
c      meat(i,j)      number of transmitted projectiles versus
c                     energy (column) and polar emission angle (row)
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     polar angle interval j: cosine interval of 0.05,
c                     20 intervals
c                     dimension : meat(102,22)
c
c      meatl(i,k)     number of transmitted projectiles versus
c                     energy (column) and polar emission angle (row)
c                     energy interval i: a decade is divided into 12
c                     equal logarithmic intervals from 0.1 to 10**5 ev
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     dimension : meatl(75,21)
c
c      meatb(i,j,k)   number of transmitted projectiles versus
c                     energy (column), polar (row) and azimuthal
c                     (matrix) emission angles
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     polar angle interval k: cosine interval of 0.05,
c                     20 intervals
c                     azimuthal angle interval j: 15 deg, 12 matrices
c                     10 target species l (2 layers)
c                     these matrices are not calculated, if the angle
c                     of incidence, alpha, is smaller than 1 deg
c                     dimension : meatb(102,12,22)
c
c      magt(i,j)      number of transmitted projectiles versus
c                     azimuthal (column) and polar (row) emission
c                     angles
c                     azimuthal angle interval i: 3 deg, 60 intervals
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     dimension : magt(62,22)
c
c      emat(i,j)      transmitted energy versus azimuthal (column)
c                     and polar (row) emission angles
c                     azimuthal angle interval i: 3 deg, 60 intervals
c                     polar angle interval j: cosine intervals of 0.05,
c                     20 intervals
c                     dimension : emat(62,22)
c
c      mept(i,j)      number of transmitted projectiles versus
c                     energy (column) and pathlength (row)
c                     energy interval i: 1% of the projectile energy e0,
c                     100 intervals
c                     pathlength interval j: cw , 100 intervals
c                     dimension : mept(102,102)
c
c
c      remarks
c      the matrix output is in most cases only reasonable for a large
c      number of histories (nh.gt.10**5)
c
c
c      data on disc (fort.17) , unformatted
c
c      z1,m1,e0,alpha,ef,esb,sheath
c      ,nh,ri,x0,rd,cw,ca,kk0,kk0r,kdee1,kdee2
c      (dx(i),i=1,3),(rho(i),i=1,3),(ck(i),i=1,3)
c      ,((zt(i,j),j=1,5),i=1,3),((mt(i,j),j=1,5),i=1,3)
c      ,((co(i,j),j=1,5),i=1,3),((sbe(i,j),j=1,5),i=1,3)
c      ,((ed(i,j),j=1,5),i=1,3),((be(i,j),j=1,5),i=1,3)
c      ti,zarg,velc
c      ,hlm,hlmt,su,sut,xc,rt,inel,l,lj
c      ,nproj,kib,kit,maxa,nall,npa,nsa,kis,kist
c      ,iim,eim,ib,eb,it,et,ispa,espa,ispat,espat
c      ,fix0,sex,thx,fox,sigmax,dfix0,dsex,dthx
c      ,fir0,ser,thr,for,sigmar,dfir0,dser,dthr
c      ,fip0,sep,thp,fop,sigmap,dfip0,dsep,dthp
c      ,avnli,vanli,signli,dfinli
c      ,avili,vaili,sigili,dfiili
c      avcsum,avcdis
c      ,fie0,see,the,foe,sigmae,dfie0,dsee,dthe
c      ,fiw0,sew,thw,fow,sigmaw,dfiw0,dsew,dthw
c      ,fii0,sei,thi,foi,sigmai,dfii0,dsei,dthi
c      ,fis0,ses,ths,fos,sigmas,dfis0,dses,dths
c      ,iirp,trirp,iipl,tion,tdmgn,tcasmo,tphon,tdent
c      rn,re,emeanr,emean,tn,te,tmeanr,emeant
c      ,fib0,seb,thb,fob,sigmab,dfib0,dseb,dthb
c      ,fipb0,sepb,thpb,fopb,sigmpb,dfipb0,dsepb,dthpb
c      ,avnlb,vanlb,signlb,dfinlb
c      ,avilb,vailb,sigilb,dfiilb
c      fit0,set,tht,fot,sigmat,dfit0,dset,dtht
c      ,fipt0,sept,thpt,fopt,sigmpt,dfipt0,dsept,dthpt
c      ,avnlt,vanlt,signlt,dfinlt
c      ,avilt,vailt,sigilt,dfiilt
c      (irp(i),i=0,100),(rirp(i),i=0,100)
c      ,(ipl(i),i=1,100),(ion(i),i=1,100),(dmgn(i),i=1,100)
c      ,(casmot(i),i=1,100),(phon(i),i=1,100),(dent(i),i=1,100)
c      (fiesb(j),j=1,10),(seesb(j),j=1,10),(thesb(j),j=1,10)
c      ,(foesb(j),j=1,10),(sgmesb(j),j=1,10)
c      ,(dfiesb(j),j=1,10),(dseesb(j),j=1,10)
c      ,(dthesb(j),j=1,10)
c      ((ele(i,j),j=1,15),i=1,100),((eli(i,j),j=1,15),i=1,100)
c      ,((elp(i,j),j=1,15),i=1,100)
c      ,(elet(j),j=1,15),(elit(j),j=1,15),(elpt(j),j=1,15)
c      (ai(i),i=1,20),(kadb(i),i=1,20),(kadt(i),i=1,20)
c      ,(rkadb(i),i=1,20),(rkadt(i),i=1,20)
c      (kads(i),i=1,20),(kadst(i),i=1,20)
c      ,(rkads(i),i=1,20),(rkadst(i),i=1,20)
c      ((kadrip(i,j),j=1,10),i=1,20)
c      ,((kadris(i,j),j=1,10),i=1,20)
c      ,((kadrop(i,j),j=1,10),i=1,20)
c      ,((kadros(i,j),j=1,10),i=1,20)
c      ((KAdsj(i,j),j=1,10),i=1,20)
c      ,((rkadsj(i,j),j=1,10),i=1,20)
c      ,((kadsl(i,j),j=1,2),i=1,20)
c      ,((kkadsl(i,j),j=1,2),i=1,20)
c      ((kdstj(i,j),j=1,10),i=1,20)
c      ,((rkdstj(i,j),j=1,10),i=1,20)
c      ,((kdstl(i,j),j=1,2),i=1,20)
c      ,((rkdstl(i,j),j=1,2),i=1,20)
c      (ibsp(i),i=1,15),(ebsp(i),i=1,15)
c      ,(spy(i),i=1,15),(spe(i),i=1,15)
c      ,(rey(i),i=1,15),(emsp(i),i=1,15)
c      ,(ispal(i),i=1,3),(espal(i),i=1,3)
c      (ispip(i),i=1,15),(ispis(i),i=1,15)
c      ,(ispop(i),i=1,15),(ispos(i),i=1,15)
c      ,(espip(i),i=1,15),(espis(i),i=1,15)
c      ,(espop(i),i=1,15),(espos(i),i=1,15)
c      ,(rip(i),i=1,15),(ris(i),i=1,15)
c      ,(rop(i),i=1,15),(ros(i),i=1,15)
c      ,(reip(i),i=1,15),(reis(i),i=1,15)
c      ,(reop(i),i=1,15),(reos(i),i=1,15)
c      (itsp(i),i=1,15),(etsp(i),i=1,15)
c      ,(spyt(i),i=1,15),(spet(i),i=1,15)
c      ,(reyt(i),i=1,15),(emspt(i),i=1,15)
c      ,(ispalt(i),i=1,3),(espalt(i),i=1,3)
c      (ispipt(i),i=1,15),(ispist(i),i=1,15)
c      ,(ispopt(i),i=1,15),(ispost(i),i=1,15)
c      ,(espipt(i),i=1,15),(espist(i),i=1,15)
c      ,(espopt(i),i=1,15),(espost(i),i=1,15)
c      ,(ript(i),i=1,15),(rist(i),i=1,15)
c      ,(ropt(i),i=1,15),(rost(i),i=1,15)
c      ,(reipt(i),i=1,15),(reist(i),i=1,15)
c      ,(reopt(i),i=1,15),(reost(i),i=1,15)
c      ((meab(i,j),j=1,22),i=1,102)
c      ,((magb(i,j),j=1,22),i=1,62)
c      ,(((meagb(i,j,k),k=1,22),j=1,36),i=1,102)
c      ,((ema(i,j),j=1,22),i=1,62),(elog(i),i=1,75)
c      ,(eabl(i),i=1,75),((meabl(i,j),j=1,21),i=1,75)
c      ,((mepb(i,j),j=1,102),i=1,102)
c      ((meat(i,j),j=1,22),i=1,102)
c      ,((magt(i,j),j=1,22),i=1,62)
c      ,(((meagt(i,j,k),k=1,22),j=1,36),i=1,102)
c      ,((emat(i,j),j=1,22),i=1,62)
c      ,(eatl(i),i=1,75),((meatl(i,j),j=1,21),i=1,75)
c      ,((mept(i,j),j=1,102),i=1,102)
c      (((meas(i,j,k),k=1,10),j=1,22),i=1,102)
c      ,(((mags(i,j,k),k=1,10),j=1,22),i=1,62)
c      ,((easl(i,j),j=1,10),i=1,75)
c      ,(((measl(i,j,k),k=1,10),j=1,21),i=1,75)
c      (((meast(i,j,k),k=1,10),j=1,22),i=1,102)
c      ,(((magst(i,j,k),k=1,10),j=1,22),i=1,62)
c      ,((eastl(i,j),j=1,10),i=1,75)
c      ,(((meastl(i,j,k),k=1,10),j=1,21),i=1,75)
c      ((((meags(i,j,k,mn),mn=1,10),k=1,22),j=1,12),i=1,102)
c      ,(((magsa(i,j,k),k=1,10),j=1,32),i=1,62)
CC     ,((((MEAGST(I,J,K,L),L=1,10),K=1,22),J=1,36),I=1,102)
c      ((eld(i,j),i=1,100),j=1,15)
c      xsum,x2sum,x3sum,x4sum,x5sum,x6sum
c      eb,eb2sum,eb3sum,eb4sum,eb5sum,eb6sum
c      ,eb1sul,eb2sul,eb3sul,eb4sul,eb5sul,eb6sul
c      (ebsp(j),j=1,15),(spe2s(j),j=1,15),(spe3s(j),j=1,15)
c      ,(spe4s(j),j=1,15),(spe5s(j),j=1,15),(spe6s(j),j=1,15)
c      (spe1sl(j),j=1,15),(spe2sl(j),j=1,15),(spe3sl(j),j=1,15)
c      ,(spe4sl(j),j=1,15),(spe5sl(j),j=1,15)
c      ,(spe6sl(j),j=1,15)
c      ((icd(i,j),j=1,15),i=1,100),((icdr(i,j),j=1,15),i=1,100)
c      (((icdiri(i,j,k),k=1,15),j=1,15),i=1,100)
c      ,((icdirn(i,j),j=1,15),i=1,100)
c      exi1s,exi2s,exi3s,exi4s,exi5s,exi6s
c      ,coss1s,coss2s,coss3s,coss4s,coss5s,coss6s
c      ibl,(ibsp(i),i=1,15)

