The dhcp server is systemd-networkd, and the dhcp
plugin can request an ip but can not renew it.
The systemd-networkd just ignore the renew request.
```
2024/09/14 21:46:00 no DHCP packet received within 10s
2024/09/14 21:46:00 retrying in 31.529038 seconds
2024/09/14 21:46:42 no DHCP packet received within 10s
2024/09/14 21:46:42 retrying in 63.150490 seconds
2024/09/14 21:47:45 98184616c91f15419f5cacd012697f85afaa2daeb5d3233e28b0ec21589fb45a/iot/eth1: no more tries
2024/09/14 21:47:45 98184616c91f15419f5cacd012697f85afaa2daeb5d3233e28b0ec21589fb45a/iot/eth1: renewal time expired, rebinding
2024/09/14 21:47:45 Link "eth1" down. Attempting to set up
2024/09/14 21:47:45 98184616c91f15419f5cacd012697f85afaa2daeb5d3233e28b0ec21589fb45a/iot/eth1: lease rebound, expiration is 2024-09-14 22:47:45.309270751 +0800 CST m=+11730.048516519
```
Follow the https://datatracker.ietf.org/doc/html/rfc2131#section-4.3.6,
following options must not be sent in renew
- Requested IP Address
- Server Identifier
Since the upstream code has been inactive for 6 years,
we should switch to another dhcpv4 library.
The new selected one is https://github.com/insomniacslk/dhcp.
Signed-off-by: Songmin Li <lisongmin@protonmail.com>
Currently, we can not set the metric of routes in dhcp.
It's ok if there is only a network interface.
But if there are multiple network interfaces, and both have a default route,
We need to set the metric of the route to make the traffic
go through the correct network interface.
For host-local and static, we can set the metric with the route.priority option.
But there is no such option for dhcp.
Signed-off-by: Songmin Li <lisongmin@protonmail.com>
From the dhcp daemon log, we can see that dhcp will fail to acquire
the lease when the link is down, and success on retry.
```
2024/08/21 21:30:44 macvlan-dhcp/eth1: acquiring lease
2024/08/21 21:30:44 Link "eth1" down. Attempting to set up
2024/08/21 21:30:44 network is down
2024/08/21 21:30:44 retrying in 2.641696 seconds
2024/08/21 21:30:49 macvlan-dhcp/eth1: lease acquired, expiration is 2024-08-22 09:30:49.755367962 +0800 CST m=+43205.712107889
```
After move the code of set up link to the beginning of the function, the
dhcp success on first time.
```
2024/08/21 22:04:02 macvlan-dhcp/eth1: acquiring lease
2024/08/21 22:04:02 Link "eth1" down. Attempting to set up
2024/08/21 22:04:05 macvlan-dhcp/eth1: lease acquired, expiration is 2024-08-22 10:04:05.297887726 +0800 CST m=+43203.081141304
```
Signed-off-by: Songmin Li <lisongmin@protonmail.com>
The test named "correctly handles multiple DELs for the same container" in the ipam/dhcp package experiences race conditions when multiple goroutines concurrently access and modify the Args struct (of type CmdArgs).
To address these issues, a copy of the CmdArgs struct is now created in each function to eliminate data races.
Also, the test-linux.sh and test-windows.sh scripts have been updated to include the '-race' flag, enabling race detection during testing. This change helps prevent future race conditions by activating the Go race detector.
Signed-off-by: Alina Sudakov <asudakov@redhat.com>
This commit updates the import of ginkgo to v2 in
all of the tests.
Signed-off-by: liornoy <lnoy@redhat.com>
Co-authored-by: Sascha Grunert <sgrunert@redhat.com>
Previously, the Allocate method of the daemon always created a new Lease
object. However, as both the CNI ADD and CHECK commands call Allocate,
and CHECK can be called multiple times, this resulted in multiple Lease
objects being created per pod.
Each of these leases was long lived with its own maintain() loop -
however the daemon only kept track of the most recent one, meaning any
old lease objects remained running forever (and held open their NetNS
files). After a long enough period, this resulted in the system crashing
out with "too many files" or a similar error limits-related error.
This commit updates the behaviour of Allocate() to first check if a
Lease already exists for the given clientID. If none is found, one is
created as before. If a Lease is found, a new Check() mechanism is
called, which simply wakes up the maintain() loop to cause it to check
the status of the lease.
This may fix #329.
Signed-off-by: Emily Shepherd <emily@redcoat.dev>
These were previously left intact, even when exiting gracefully. As the
daemon also fails if the socket already exists, it became the caller's
responsibilityto check for and cleanup old socket files when performing
graceful / deliberate restarts.
Signed-off-by: Emily Shepherd <emily@redcoat.dev>
Currently, hostname is set in the original DHCPREQUEST but not the
renewal. With some DHCP server implementations (such as FreeBSD dhcpd),
this leads to the hostname being cleared in the lease table.
This behavior is inconsistent with other DHCP clients such as dhclient
which set the hostname on the renewal request as well. To fix, use the
same options for acquire and renew.
This is compatible with RFC 2131 (see table 5).
Signed-off-by: Akhil Velagapudi <4@4khil.com>
The client id was constructed differently in the acquire
function compared to the release and renew functions,
which caused the dhcp-server to consider it a different client.
This is now encapsulated in a common function.
Signed-off-by: Fabian Wiesel <fabian.wiesel@sap.com>
First byte of client ID is type, instead of value. See this from
RFC2132:
Code Len Type Client-Identifier
+-----+-----+-----+-----+-----+---
| 61 | n | t1 | i1 | i2 | ...
+-----+-----+-----+-----+-----+---
Signed-off-by: SilverBut <SilverBut@users.noreply.github.com>
Almost every first retry of DHCP will fail due to interface is not up. Add a
fast retry to reduce unnecessary latency.
Signed-off-by: SilverBut <SilverBut@users.noreply.github.com>
The default lease acquisition timeout of 62 seconds is way too long when
running multiple testcases, overrunning the `go test` timeout of 10m. Let
testcases specify a shorter timeout.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Eventually the timeout value will become a CLI argument
The default timeout was nestled all the way in the lease constructor
This commit is the first step in making the timeout configurable by
moving it to the DHCPLease constructor
Signed-off-by: toby lorne <toby@toby.codes>
Removing content and pointing at the new website as a part of the CNI Documentation migration.
Signed-off-by: Nate W <4453979+nate-double-u@users.noreply.github.com>
The current cni config has an extra comma and cannot be parsed normally, the kubelet will report an error as follows:
"Error loading CNI config file: error parsing configuration: invalid character '}' looking for beginning of object key string"
Signed-off-by: xieyanker <xjsisnice@gmail.com>
Now that libcni has the ability to print a version message, plumb it
through correctly.
While we're at it,
- fix import paths
- run gofmt
- add some more comments to sample
- add container runtime swappability for release
