diff --git a/docs/cscs-userlab/index.md b/docs/cscs-userlab/index.md index 812dacb..d2a8f6f 100644 --- a/docs/cscs-userlab/index.md +++ b/docs/cscs-userlab/index.md @@ -45,13 +45,13 @@ For 2025 we can offer access to [CSCS Alps](https://www.cscs.ch/computers/alps) * [CSCS User Portal](https://user.cscs.ch/) * Documentation - * [CSCS Eiger CPU multicore cluster](https://docs.cscs.ch/clusters/eiger/) - * [CSCS Daint GPU cluster](https://docs.cscs.ch/clusters/daint/) + * [CSCS Eiger CPU multicore cluster](https://docs.cscs.ch/clusters/eiger/) + * [CSCS Daint GPU cluster](https://docs.cscs.ch/clusters/daint/) ## Contact information * PSI Contacts: - * Mailing list contact: - * Marc Caubet Serrabou - * Derek Feichtinger - * Mailing list for receiving user notifications and survey information: psi-hpc-at-cscs@lists.psi.ch [(subscribe)](https://psilists.ethz.ch/sympa/subscribe/psi-hpc-at-cscs) + * Mailing list contact: + * Marc Caubet Serrabou + * Derek Feichtinger + * Mailing list for receiving user notifications and survey information: [(subscribe)](https://psilists.ethz.ch/sympa/subscribe/psi-hpc-at-cscs) diff --git a/docs/gmerlin6/cluster-introduction.md b/docs/gmerlin6/cluster-introduction.md index e0b434b..8e83601 100644 --- a/docs/gmerlin6/cluster-introduction.md +++ b/docs/gmerlin6/cluster-introduction.md @@ -1,12 +1,4 @@ ---- -title: Introduction -#tags: -#keywords: -last_updated: 28 June 2019 -#summary: "GPU Merlin 6 cluster overview" -sidebar: merlin6_sidebar -permalink: /gmerlin6/cluster-introduction.html ---- +# Introduction ## About Merlin6 GPU cluster @@ -25,10 +17,10 @@ of **GPU**-based resources which are mostly used by the BIO experiments. ### Slurm 'gmerlin6' -THe **GPU nodes** have a dedicated **Slurm** cluster, called **`gmerli6`**. +THe **GPU nodes** have a dedicated **Slurm** cluster, called **`gmerli6`**. -This cluster contains the same shared storage resources (`/data/user`, `/data/project`, `/shared-scracth`, `/afs`, `/psi/home`) -which are present in the other Merlin Slurm clusters (`merlin5`,`merlin6`). The Slurm `gmerlin6` cluster is maintainted +This cluster contains the same shared storage resources (`/data/user`, `/data/project`, `/shared-scracth`, `/afs`, `/psi/home`) +which are present in the other Merlin Slurm clusters (`merlin5`,`merlin6`). The Slurm `gmerlin6` cluster is maintainted independently to ease access for the users and keep independent user accounting. ## Merlin6 Architecture diff --git a/docs/gmerlin6/hardware-and-software-description.md b/docs/gmerlin6/hardware-and-software-description.md index bea9060..4b037d0 100644 --- a/docs/gmerlin6/hardware-and-software-description.md +++ b/docs/gmerlin6/hardware-and-software-description.md @@ -1,19 +1,11 @@ ---- -title: Hardware And Software Description -#tags: -#keywords: -last_updated: 19 April 2021 -#summary: "" -sidebar: merlin6_sidebar -permalink: /gmerlin6/hardware-and-software.html ---- +# Hardware And Software Description ## Hardware ### GPU Computing Nodes The GPU Merlin6 cluster was initially built from recycled workstations from different groups in the BIO division. -From then, little by little it was updated with new nodes from sporadic investments from the same division, and it was never possible a central big investment. +From then, little by little it was updated with new nodes from sporadic investments from the same division, and it was never possible a central big investment. Hence, due to this, the Merlin6 GPU computing cluster has a non homogeneus solution, consisting on a big variety of hardware types and components. On 2018, for the common good, BIO decided to open the cluster to the Merlin users and make it widely accessible for the PSI scientists. @@ -145,6 +137,7 @@ ibstat | grep Rate In the Merlin6 GPU computing nodes, we try to keep software stack coherency with the main cluster [Merlin6](../merlin6/index.md). Due to this, the Merlin6 GPU nodes run: + * [**RedHat Enterprise Linux 7**](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/7.9_release_notes/index) * [**Slurm**](https://slurm.schedmd.com/), we usually try to keep it up to date with the most recent versions. * [**GPFS v5**](https://www.ibm.com/support/knowledgecenter/en/STXKQY_5.0.2/ibmspectrumscale502_welcome.html) diff --git a/docs/gmerlin6/slurm-configuration.md b/docs/gmerlin6/slurm-configuration.md index 642d18d..4cff396 100644 --- a/docs/gmerlin6/slurm-configuration.md +++ b/docs/gmerlin6/slurm-configuration.md @@ -1,12 +1,4 @@ ---- -title: Slurm cluster 'gmerlin6' -#tags: -keywords: configuration, partitions, node definition, gmerlin6 -last_updated: 29 January 2021 -summary: "This document describes a summary of the Slurm 'configuration." -sidebar: merlin6_sidebar -permalink: /gmerlin6/slurm-configuration.html ---- +# Slurm cluster 'gmerlin6' This documentation shows basic Slurm configuration and options needed to run jobs in the GPU cluster. @@ -49,30 +41,35 @@ Users might need to specify the Slurm partition. If no partition is specified, i The table below resumes shows all possible partitions available to users: -| GPU Partition | Default Time | Max Time | PriorityJobFactor\* | PriorityTier\*\* | +| GPU Partition | Default Time | Max Time | PriorityJobFactor | PriorityTier | |:---------------------: | :----------: | :--------: | :-----------------: | :--------------: | | `gpu` | 1 day | 1 week | 1 | 1 | | `gpu-short` | 2 hours | 2 hours | 1000 | 500 | | `gwendolen` | 30 minutes | 2 hours | 1000 | 1000 | -| `gwendolen-long`\*\*\* | 30 minutes | 8 hours | 1 | 1 | +| `gwendolen-long` | 30 minutes | 8 hours | 1 | 1 | -\*The **PriorityJobFactor** value will be added to the job priority (*PARTITION* column in `sprio -l` ). In other words, jobs sent to higher priority +The **PriorityJobFactor** value will be added to the job priority (*PARTITION* column in `sprio -l` ). In other words, jobs sent to higher priority partitions will usually run first (however, other factors such like **job age** or mainly **fair share** might affect to that decision). For the GPU partitions, Slurm will also attempt first to allocate jobs on partitions with higher priority over partitions with lesser priority. -\*\*Jobs submitted to a partition with a higher **PriorityTier** value will be dispatched before pending jobs in partition with lower *PriorityTier* value -and, if possible, they will preempt running jobs from partitions with lower *PriorityTier* values. +Jobs submitted to a partition with a higher **PriorityTier** value will be dispatched before pending jobs in partition with lower *PriorityTier* value +and, if possible, they will preempt running jobs from partitions with lower **PriorityTier** values. -\*\*\***gwnedolen-long** is a special partition which is enabled during non-working hours only. As of _Nov 2023_, the current policy is to disable this partition from Mon to Fri, from 1am to 5pm. However, jobs can be submitted anytime, but can only be scheduled outside this time range. +**gwnedolen-long** is a special partition which is enabled during non-working +hours only. As of **Nov 2023**, the current policy is to disable this partition +from Mon to Fri, from 1am to 5pm. However, jobs can be submitted anytime, but +can only be scheduled outside this time range. ### Merlin6 GPU Accounts Users need to ensure that the public **`merlin`** account is specified. No specifying account options would default to this account. + This is mostly needed by users which have multiple Slurm accounts, which may define by mistake a different account. ```bash #SBATCH --account=merlin # Possible values: merlin, gwendolen ``` + Not all the accounts can be used on all partitions. This is resumed in the table below: | Slurm Account | Slurm Partitions | @@ -82,14 +79,20 @@ Not all the accounts can be used on all partitions. This is resumed in the table By default, all users belong to the `merlin` Slurm accounts, and jobs are submitted to the `gpu` partition when no partition is defined. -Users only need to specify the `gwendolen` account when using the `gwendolen` or `gwendolen-long` partitions, otherwise specifying account is not needed (it will always default to `merlin`). +Users only need to specify the `gwendolen` account when using the `gwendolen` or `gwendolen-long` partitions, otherwise specifying account is not needed (it will always default to `merlin`). #### The 'gwendolen' account -For running jobs in the **`gwendolen`/`gwendolen-long`** partitions, users must specify the **`gwendolen`** account. -The `merlin` account is not allowed to use the Gwendolen partitions. +For running jobs in the **`gwendolen`/`gwendolen-long`** partitions, users must +specify the **`gwendolen`** account. The `merlin` account is not allowed to +use the Gwendolen partitions. -Gwendolen is restricted to a set of users belonging to the **`unx-gwendolen`** Unix group. If you belong to a project allowed to use **Gwendolen**, or you are a user which would like to have access to it, please request access to the **`unx-gwendolen`** Unix group through [PSI Service Now](https://psi.service-now.com/): the request will be redirected to the responsible of the project (Andreas Adelmann). +Gwendolen is restricted to a set of users belonging to the **`unx-gwendolen`** +Unix group. If you belong to a project allowed to use **Gwendolen**, or you are +a user which would like to have access to it, please request access to the +**`unx-gwendolen`** Unix group through [PSI Service +Now](https://psi.service-now.com/): the request will be redirected to the +responsible of the project (Andreas Adelmann). ### Slurm GPU specific options @@ -119,16 +122,20 @@ This is detailed in the below table. #### Constraint / Features -Instead of specifying the GPU **type**, sometimes users would need to **specify the GPU by the amount of memory available in the GPU** card itself. -This has been defined in Slurm with **Features**, which is a tag which defines the GPU memory for the different GPU cards. -Users can specify which GPU memory size needs to be used with the `--constraint` option. In that case, notice that *in many cases - there is not need to specify `[:]`* in the `--gpus` option. +Instead of specifying the GPU **type**, sometimes users would need to **specify +the GPU by the amount of memory available in the GPU** card itself. + +This has been defined in Slurm with **Features**, which is a tag which defines +the GPU memory for the different GPU cards. Users can specify which GPU memory +size needs to be used with the `--constraint` option. In that case, notice that +*in many cases there is not need to specify `[:]`* in the `--gpus` +option. ```bash #SBATCH --contraint= # Possible values: gpumem_8gb, gpumem_11gb, gpumem_24gb, gpumem_40gb ``` -The table below shows the available **Features** and which GPU card models and GPU nodes they belong to: +The table below shows the available **Features** and which GPU card models and GPU nodes they belong to: @@ -172,6 +179,7 @@ The table below shows the available **Features** and which GPU card models and G #### Other GPU options Alternative Slurm options for GPU based jobs are available. Please refer to the **man** pages + for each Slurm command for further information about it (`man salloc`, `man sbatch`, `man srun`). Below are listed the most common settings: @@ -191,8 +199,9 @@ Please, notice that when defining `[:]` once, then all other options must #### Dealing with Hyper-Threading -The **`gmerlin6`** cluster contains the partitions `gwendolen` and `gwendolen-long`, which have a node with Hyper-Threading enabled. -In that case, one should always specify whether to use Hyper-Threading or not. If not defined, Slurm will +The **`gmerlin6`** cluster contains the partitions `gwendolen` and `gwendolen-long`, which have a node with Hyper-Threading enabled. + +In that case, one should always specify whether to use Hyper-Threading or not. If not defined, Slurm will generally use it (exceptions apply). For this machine, generally HT is recommended. ```bash @@ -200,14 +209,14 @@ generally use it (exceptions apply). For this machine, generally HT is recommend #SBATCH --hint=nomultithread # Don't use extra threads with in-core multi-threading. ``` -## User and job limits +## User and job limits The GPU cluster contains some basic user and job limits to ensure that a single user can not overabuse the resources and a fair usage of the cluster. The limits are described below. ### Per job limits -These are limits applying to a single job. In other words, there is a maximum of resources a single job can use. +These are limits applying to a single job. In other words, there is a maximum of resources a single job can use. Limits are defined using QoS, and this is usually set at the partition level. Limits are described in the table below with the format: `SlurmQoS(limits)` (possible `SlurmQoS` values can be listed with the command `sacctmgr show qos`): @@ -218,25 +227,29 @@ Limits are defined using QoS, and this is usually set at the partition level. Li | **gwendolen** | `gwendolen` | No limits | | **gwendolen-long** | `gwendolen` | No limits, active from 9pm to 5:30am | -* With the limits in the public `gpu` and `gpu-short` partitions, a single job using the `merlin` acccount -(default account) can not use more than 40 CPUs, more than 8 GPUs or more than 200GB. -Any job exceeding such limits will stay in the queue with the message **`QOSMax[Cpu|GRES|Mem]PerJob`**. -As there are no more existing QoS during the week temporary overriding job limits (this happens for -instance in the CPU **daily** partition), the job needs to be cancelled, and the requested resources -must be adapted according to the above resource limits. +* With the limits in the public `gpu` and `gpu-short` partitions, a single job using the `merlin` acccount + + (default account) can not use more than 40 CPUs, more than 8 GPUs or more than 200GB. + Any job exceeding such limits will stay in the queue with the message **`QOSMax[Cpu|GRES|Mem]PerJob`**. + As there are no more existing QoS during the week temporary overriding job limits (this happens for + instance in the CPU **daily** partition), the job needs to be cancelled, and the requested resources + must be adapted according to the above resource limits. * The **gwendolen** and **gwendolen-long** partitions are two special partitions for a **[NVIDIA DGX A100](https://www.nvidia.com/en-us/data-center/dgx-a100/)** machine. -Only users belonging to the **`unx-gwendolen`** Unix group can run in these partitions. No limits are applied (machine resources can be completely used). + + Only users belonging to the **`unx-gwendolen`** Unix group can run in these partitions. No limits are applied (machine resources can be completely used). * The **`gwendolen-long`** partition is available 24h. However, - * from 5:30am to 9pm the partition is `down` (jobs can be submitted, but can not run until the partition is set to `active`). - * from 9pm to 5:30am jobs are allowed to run (partition is set to `active`). + * from 5:30am to 9pm the partition is `down` (jobs can be submitted, but can not run until the partition is set to `active`). + * from 9pm to 5:30am jobs are allowed to run (partition is set to `active`). ### Per user limits for GPU partitions -These limits apply exclusively to users. In other words, there is a maximum of resources a single user can use. -Limits are defined using QoS, and this is usually set at the partition level. Limits are described in the table below with the format: `SlurmQoS(limits)` -(possible `SlurmQoS` values can be listed with the command `sacctmgr show qos`): +These limits apply exclusively to users. In other words, there is a maximum of +resources a single user can use. Limits are defined using QoS, and this is +usually set at the partition level. Limits are described in the table below +with the format: `SlurmQoS(limits)` (possible `SlurmQoS` values can be listed +with the command `sacctmgr show qos`): | Partition | Slurm Account | Mon-Sun 0h-24h | |:------------------:| :----------------: | :---------------------------------------------: | @@ -245,13 +258,18 @@ Limits are defined using QoS, and this is usually set at the partition level. Li | **gwendolen** | `gwendolen` | No limits | | **gwendolen-long** | `gwendolen` | No limits, active from 9pm to 5:30am | -* With the limits in the public `gpu` and `gpu-short` partitions, a single user can not use more than 80 CPUs, more than 16 GPUs or more than 400GB. -Jobs sent by any user already exceeding such limits will stay in the queue with the message **`QOSMax[Cpu|GRES|Mem]PerUser`**. -In that case, job can wait in the queue until some of the running resources are freed. +* With the limits in the public `gpu` and `gpu-short` partitions, a single user can not use more than 80 CPUs, more than 16 GPUs or more than 400GB. + + Jobs sent by any user already exceeding such limits will stay in the queue + with the message **`QOSMax[Cpu|GRES|Mem]PerUser`**. In that case, job can + wait in the queue until some of the running resources are freed. * Notice that user limits are wider than job limits. In that way, a user can run up to two 8 GPUs based jobs, or up to four 4 GPUs based jobs, etc. -Please try to avoid occupying all GPUs of the same type for several hours or multiple days, otherwise it would block other users needing the same -type of GPU. + +!!! warning + Please try to avoid occupying all GPUs of the same type for several hours or + multiple days, otherwise it would block other users needing the same type of + GPU. ## Advanced Slurm configuration @@ -265,4 +283,8 @@ For understanding the Slurm configuration setup in the cluster, sometimes may be * ``/etc/slurm/cgroup.conf`` - can be found in the computing nodes, is also propagated to login nodes for user read access. The previous configuration files which can be found in the login nodes, correspond exclusively to the **merlin6** cluster configuration files. -Configuration files for the old **merlin5** cluster or for the **gmerlin6** cluster must be checked directly on any of the **merlin5** or **gmerlin6** computing nodes (in example, by login in to one of the nodes while a job or an active allocation is running). + +Configuration files for the old **merlin5** cluster or for the **gmerlin6** +cluster must be checked directly on any of the **merlin5** or **gmerlin6** +computing nodes (in example, by login in to one of the nodes while a job or an +active allocation is running). diff --git a/docs/images/merlin_cave.png b/docs/images/merlin_cave.png new file mode 100644 index 0000000..351bf90 Binary files /dev/null and b/docs/images/merlin_cave.png differ diff --git a/docs/index.md b/docs/index.md index 0b447f3..53be1ef 100644 --- a/docs/index.md +++ b/docs/index.md @@ -6,9 +6,9 @@ hide: # HPCE User Documentation -![The HPCE clusters](images/front_page.png){ width="500" } +![The HPCE clusters](images/merlin_cave.png){ width="650px" } /// caption -The magical trio 🪄 +_Within his lair, the wizard ever strives for the perfection of his art._ /// The [HPCE @@ -16,11 +16,7 @@ group](https://www.psi.ch/en/awi/high-performance-computing-and-emerging-technol is part of the [PSI Center for Scientific Computing, Theory and Data](https://www.psi.ch/en/csd) at [Paul Scherrer Institute](https://www.psi.ch). It provides a range of HPC services for PSI -scientists, such as the Merlin series of HPC clusters, and also engages in -research activities on technologies (data analysis and machine learning -technologies) used on these systems. - -## Quick Links - -- user support -- news +researchers, staff, and external collaborators, such as the Merlin series of +HPC clusters. Furthermore the HPCE group engages in research activities on +technologies (data analysis and machine learning technologies) used on these +systems. diff --git a/docs/meg/migration-to-merlin7.md b/docs/meg/migration-to-merlin7.md index 1364f07..6e6b1a0 100644 --- a/docs/meg/migration-to-merlin7.md +++ b/docs/meg/migration-to-merlin7.md @@ -15,8 +15,8 @@ Welcome to the official documentation for migrating experiment data from **MEG** | merlin7 | /data/user/`$USER` | /data/user/`$USER` | /data/project/meg | | * The **Merlin6 home and user data directores have been merged** into the single new home directory `/data/user/$USER` on Merlin7. - * This is the same for the home directory in the meg cluster, which has to be merged into `/data/user/$USER` on Merlin7. - * Users are responsible for moving the data. + * This is the same for the home directory in the meg cluster, which has to be merged into `/data/user/$USER` on Merlin7. + * Users are responsible for moving the data. * The **experiment directory has been integrated into `/data/project/meg`**. ### Recommended Cleanup Actions @@ -38,16 +38,17 @@ A `experiment_migration.setup` migration script must be executed from **any MeG * The script **must be executed after every reboot** of the destination nodes. * **Reason:** On Merlin7, the home directory for the `root` user resides on ephemeral storage (no physical disk). + After a reboot, this directory is cleaned, so **SSH keys need to be redeployed** before running the migration again. #### When using a PSI Active Directory (AD) account * Applicable accounts include, for example: - * `gac-meg2_data` - * `gac-meg2` + * `gac-meg2_data` + * `gac-meg2` * The script only needs to be executed **once**, provided that: - * The home directory for the AD account is located on a shared storage area. - * This shared storage is accessible from the node executing the transfer. + * The home directory for the AD account is located on a shared storage area. + * This shared storage is accessible from the node executing the transfer. * **Reason:** On Merlin7, these accounts have their home directories on persistent shared storage, so the SSH keys remain available across reboots. To run it: @@ -71,25 +72,29 @@ If you are stuck, email: [merlin-admins@lists.psi.ch](mailto:merlin-admins@lists ### Migration Procedure 1. **Run an initial sync**, ideally within a `tmux` session - * This copies the bulk of the data from MeG to Merlin7. - * **IMPORTANT: Do not modify the destination directories** - * Please, before starting the transfer ensure that: - * The source and destination directories are correct. - * The destination directories exist. + * This copies the bulk of the data from MeG to Merlin7. + * **IMPORTANT: Do not modify the destination directories** + * Please, before starting the transfer ensure that: + * The source and destination directories are correct. + * The destination directories exist. + 2. **Run additional syncs if needed** - * Subsequent syncs can be executed to transfer changes. - * Ensure that **only one sync for the same directory runs at a time**. - * Multiple syncs are often required since the first one may take several hours or even days. + * Subsequent syncs can be executed to transfer changes. + * Ensure that **only one sync for the same directory runs at a time**. + * Multiple syncs are often required since the first one may take several hours or even days. + 3. Schedule a date for the final migration: - * Any activity must be stopped on the source directory. - * In the same way, no activity must be done on the destination until the migration is complete. + * Any activity must be stopped on the source directory. + * In the same way, no activity must be done on the destination until the migration is complete. + 4. **Perform a final sync with the `-E` option** (if it applies) - * Use `-E` **only if you need to delete files on the destination that were removed from the source.** - * This ensures the destination becomes an exact mirror of the source. - * **Never use `-E` after the destination has gone into production**, as it will delete new data created there. + * Use `-E` **only if you need to delete files on the destination that were removed from the source.** + * This ensures the destination becomes an exact mirror of the source. + * **Never use `-E` after the destination has gone into production**, as it will delete new data created there. + 5. Disable access on the source folder. 6. Enable access on the destination folder. - * At this point, **no new syncs have to be performed.** + * At this point, **no new syncs have to be performed.** !!! note "Important" @@ -160,9 +165,9 @@ The following example demonstrates how to migrate the **entire `online`** direct From: /meg/data1/online To: login001.merlin7.psi.ch:/data/project/meg/data1/online Threads: 10 | Split: 20000 files | Max size: 100G - RunID: + RunID: -Please confirm to start (y/N): +Please confirm to start (y/N): ❌ Transfer cancelled by user. ``` @@ -181,7 +186,7 @@ The following example demonstrates how to migrate **only a subdirectory**. In th From: /meg/data1/shared/subprojects/meg1 To: login002.merlin7.psi.ch:/data/project/meg/data1/shared/subprojects/meg1 Threads: 10 | Split: 20000 files | Max size: 100G - RunID: + RunID: Please confirm to start (y/N): N ❌ Transfer cancelled by user. @@ -196,5 +201,5 @@ This command initiates the migration of the directory, by creating the destinati ``` * Runs FPSYNC with 10 threads and N parts of max 20000 files or 100G files: - * Source: `/meg/data1/shared/subprojects/meg1` - * Destination: `login002.merlin7.psi.ch:/data/project/meg/data1/shared/subprojects/meg1` + * Source: `/meg/data1/shared/subprojects/meg1` + * Destination: `login002.merlin7.psi.ch:/data/project/meg/data1/shared/subprojects/meg1` diff --git a/docs/merlin5/hardware-and-software-description.md b/docs/merlin5/hardware-and-software-description.md index 74b6873..1776c90 100644 --- a/docs/merlin5/hardware-and-software-description.md +++ b/docs/merlin5/hardware-and-software-description.md @@ -1,22 +1,15 @@ ---- -title: Hardware And Software Description -#tags: -#keywords: -last_updated: 09 April 2021 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin5/hardware-and-software.html ---- +# Hardware And Software Description ## Hardware ### Computing Nodes Merlin5 is built from recycled nodes, and hardware will be decomissioned as soon as it fails (due to expired warranty and age of the cluster). + * Merlin5 is based on the [**HPE c7000 Enclosure**](https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04128339) solution, with 16 x [**HPE ProLiant BL460c Gen8**](https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04123239) nodes per chassis. * Connectivity is based on Infiniband **ConnectX-3 QDR-40Gbps** - * 16 internal ports for intra chassis communication - * 2 connected external ports for inter chassis communication and storage access. + * 16 internal ports for intra chassis communication + * 2 connected external ports for inter chassis communication and storage access. The below table summarizes the hardware setup for the Merlin5 computing nodes: @@ -91,6 +84,7 @@ However, this is an old version of Infiniband which requires older drivers and s In Merlin5, we try to keep software stack coherency with the main cluster [Merlin6](../merlin6/index.md). Due to this, Merlin5 runs: + * [**RedHat Enterprise Linux 7**](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/7.9_release_notes/index) * [**Slurm**](https://slurm.schedmd.com/), we usually try to keep it up to date with the most recent versions. * [**GPFS v5**](https://www.ibm.com/support/knowledgecenter/en/STXKQY_5.0.2/ibmspectrumscale502_welcome.html) diff --git a/docs/merlin5/slurm-configuration.md b/docs/merlin5/slurm-configuration.md index 84b07c2..9ca71f6 100644 --- a/docs/merlin5/slurm-configuration.md +++ b/docs/merlin5/slurm-configuration.md @@ -1,12 +1,4 @@ ---- -title: Slurm Configuration -#tags: -keywords: configuration, partitions, node definition -last_updated: 20 May 2021 -summary: "This document describes a summary of the Merlin5 Slurm configuration." -sidebar: merlin6_sidebar -permalink: /merlin5/slurm-configuration.html ---- +# Slurm Configuration This documentation shows basic Slurm configuration and options needed to run jobs in the Merlin5 cluster. @@ -28,7 +20,6 @@ consider the memory as a *consumable resource*. Hence, users can *oversubscribe* this legacy configuration has been kept to ensure that old jobs can keep running in the same way they did a few years ago. If you know that this might be a problem for you, please, always use Merlin6 instead. - ## Running jobs in the 'merlin5' cluster In this chapter we will cover basic settings that users need to specify in order to run jobs in the Merlin5 CPU cluster. @@ -96,11 +87,11 @@ Below are listed the most common settings: Notice that in **Merlin5** no hyper-threading is available (while in **Merlin6** it is). Hence, in **Merlin5** there is not need to specify `--hint` hyper-threading related options. -## User and job limits +## User and job limits -In the CPU cluster we provide some limits which basically apply to jobs and users. The idea behind this is to ensure a fair usage of the resources and to +In the CPU cluster we provide some limits which basically apply to jobs and users. The idea behind this is to ensure a fair usage of the resources and to avoid overabuse of the resources from a single user or job. However, applying limits might affect the overall usage efficiency of the cluster (in example, -pending jobs from a single user while having many idle nodes due to low overall activity is something that can be seen when user limits are applied). +pending jobs from a single user while having many idle nodes due to low overall activity is something that can be seen when user limits are applied). In the same way, these limits can be also used to improve the efficiency of the cluster (in example, without any job size limits, a job requesting all resources from the batch system would drain the entire cluster for fitting the job, which is undesirable). @@ -119,7 +110,7 @@ with the format `SlurmQoS(limits)` (`SlurmQoS` can be listed from the `sacctmgr | **merlin** | merlin5(cpu=384) | None | | **merlin-long** | merlin5(cpu=384) | Max. 4 nodes | -By default, by QoS limits, a job can not use more than 384 cores (max CPU per job). +By default, by QoS limits, a job can not use more than 384 cores (max CPU per job). However, for the `merlin-long`, this is even more restricted: there is an extra limit of 4 dedicated nodes for this partion. This is defined at the partition level, and will overwrite any QoS limit as long as this is more restrictive. diff --git a/docs/merlin6/98-announcements/downtimes.md b/docs/merlin6/98-announcements/downtimes.md index df4d33e..c90fff1 100644 --- a/docs/merlin6/98-announcements/downtimes.md +++ b/docs/merlin6/98-announcements/downtimes.md @@ -1,17 +1,9 @@ ---- -title: Downtimes -#tags: -#keywords: -last_updated: 28 June 2019 -#summary: "Merlin 6 cluster overview" -sidebar: merlin6_sidebar -permalink: /merlin6/downtimes.html ---- +# Downtimes -On the first Monday of each month the Merlin6 cluster might be subject to interruption due to maintenance. +On the first Monday of each month the Merlin6 cluster might be subject to interruption due to maintenance. Users will be informed with at least one week in advance when a downtime is scheduled for the next month. -Downtimes will be informed to users through the mail list. Also, a detailed description +Downtimes will be informed to users through the mail list. Also, a detailed description for the nexts scheduled interventions will be available in [Next Scheduled Downtimes](#next-scheduled-downtimes)). --- @@ -21,12 +13,14 @@ for the nexts scheduled interventions will be available in [Next Scheduled Downt Scheduled downtimes mostly affecting the storage and Slurm configurantions may require draining the nodes. When this is required, users will be informed accordingly. Two different types of draining are possible: -* **soft drain**: new jobs may be queued on the partition, but queued jobs may not be allocated nodes and run from the partition. -Jobs already running on the partition continue to run. This will be the **default** drain method. -* **hard drain**: no new jobs may be queued on the partition (job submission requests will be denied with an error message), -but jobs already queued on the partition may be allocated to nodes and run. +* **soft drain**: new jobs may be queued on the partition, but queued jobs may not be allocated nodes and run from the partition. -Unless explicitly specified, the default draining policy for each partition will be the following: +Jobs already running on the partition continue to run. This will be the **default** drain method. + +* **hard drain**: no new jobs may be queued on the partition (job submission requests will be denied with an error message), +but jobs already queued on the partition may be allocated to nodes and run. + +Unless explicitly specified, the default draining policy for each partition will be the following: * The **daily** and **general** partitions will be soft drained 12h before the downtime. * The **hourly** partition will be soft drained 1 hour before the downtime. diff --git a/docs/merlin6/98-announcements/past-downtimes.md b/docs/merlin6/98-announcements/past-downtimes.md index 150b4ee..7784c49 100644 --- a/docs/merlin6/98-announcements/past-downtimes.md +++ b/docs/merlin6/98-announcements/past-downtimes.md @@ -1,12 +1,4 @@ ---- -title: Past Downtimes -#tags: -#keywords: -last_updated: 03 September 2019 -#summary: "Merlin 6 cluster overview" -sidebar: merlin6_sidebar -permalink: /merlin6/past-downtimes.html ---- +# Past Downtimes ## Past Downtimes: Log Changes diff --git a/docs/merlin6/99-support/contact.md b/docs/merlin6/99-support/contact.md index 09cc8e3..7247335 100644 --- a/docs/merlin6/99-support/contact.md +++ b/docs/merlin6/99-support/contact.md @@ -1,12 +1,4 @@ ---- -title: Contact -#tags: -keywords: contact, support, snow, service now, mailing list, mailing, email, mail, merlin-admins@lists.psi.ch, merlin-users@lists.psi.ch, merlin users -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/contact.html ---- +# Contact ## Support diff --git a/docs/merlin6/99-support/faq.md b/docs/merlin6/99-support/faq.md index 26bcd92..f3b99e2 100644 --- a/docs/merlin6/99-support/faq.md +++ b/docs/merlin6/99-support/faq.md @@ -1,14 +1,4 @@ ---- -title: FAQ -#tags: -keywords: faq, frequently asked questions, support -last_updated: 27 October 2022 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/faq.html ---- - -{%include toc.html %} +# FAQ ## How do I register for Merlin? @@ -35,7 +25,7 @@ How to install depends a bit on the software itself. There are three common inst 2. *source compilation* using make/cmake/autoconfig/etc. Usually the compilation scripts accept a `--prefix=/data/user/$USER` directory for where to install it. Then they place files under `/bin`, `/lib`, etc. The exact syntax should be documented in the installation instructions. 3. *conda environment*. This is now becoming standard for python-based software, including lots of the AI tools. First follow the [initial setup instructions](../software-support/python.md#anaconda) to configure conda to use /data/user instead of your home directory. Then you can create environments like: -``` +```bash module load anaconda/2019.07 # if they provide environment.yml conda env create -f environment.yml diff --git a/docs/merlin6/99-support/known-problems.md b/docs/merlin6/99-support/known-problems.md index dd28f91..200fc99 100644 --- a/docs/merlin6/99-support/known-problems.md +++ b/docs/merlin6/99-support/known-problems.md @@ -1,12 +1,4 @@ ---- -title: Known Problems -#tags: -keywords: "known problems, troubleshooting, illegal instructions, paraview, ansys, shell, opengl, mesa, vglrun, module: command not found, error" -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/known-problems.html ---- +# Known Problems ## Common errors @@ -17,8 +9,8 @@ This is usually because the software was compiled with a set of instructions new and it mostly depends on the processor generation. In example, `merlin-l-001` and `merlin-l-002` contain a newer generation of processors than the old GPUs nodes, or than the Merlin5 cluster. -Hence, unless one compiles the software with compatibility with set of instructions from older processors, it will not run on old nodes. -Sometimes, this is properly set by default at the compilation time, but sometimes is not. +Hence, unless one compiles the software with compatibility with set of instructions from older processors, it will not run on old nodes. +Sometimes, this is properly set by default at the compilation time, but sometimes is not. For GCC, please refer to [GCC x86 Options](https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html) for compiling options. In case of doubts, contact us. @@ -49,7 +41,7 @@ srun --cpus-per-task=$SLURM_CPUS_PER_TASK python -c "import os; print(os.sched_g (base) ❄ [caubet_m@merlin-l-001:/data/user/caubet_m]# sbatch mysbatch_method1 Submitted batch job 8000813 -(base) ❄ [caubet_m@merlin-l-001:/data/user/caubet_m]# cat slurm-8000813.out +(base) ❄ [caubet_m@merlin-l-001:/data/user/caubet_m]# cat slurm-8000813.out From Slurm v22.05.8 srun does not inherit $SLURM_CPUS_PER_TASK {1, 45} One has to implicitly specify $SLURM_CPUS_PER_TASK @@ -72,11 +64,10 @@ echo 'In this example, by setting an environment variable SRUN_CPUS_PER_TASK' export SRUN_CPUS_PER_TASK=$SLURM_CPUS_PER_TASK srun python -c "import os; print(os.sched_getaffinity(0))" - (base) ❄ [caubet_m@merlin-l-001:/data/user/caubet_m]# sbatch mysbatch_method2 Submitted batch job 8000815 -(base) ❄ [caubet_m@merlin-l-001:/data/user/caubet_m]# cat slurm-8000815.out +(base) ❄ [caubet_m@merlin-l-001:/data/user/caubet_m]# cat slurm-8000815.out From Slurm v22.05.8 srun does not inherit $SLURM_CPUS_PER_TASK {1, 45} One has to implicitly specify $SLURM_CPUS_PER_TASK @@ -84,14 +75,13 @@ In this example, by setting an environment variable SRUN_CPUS_PER_TASK {1, 2, 3, 4, 45, 46, 47, 48} ``` - ## General topics ### Default SHELL In general, **`/bin/bash` is the recommended default user's SHELL** when working in Merlin. -Some users might notice that BASH is not the default SHELL when logging in to Merlin systems, or they might need to run a different SHELL. +Some users might notice that BASH is not the default SHELL when logging in to Merlin systems, or they might need to run a different SHELL. This is probably because when the PSI account was requested, no SHELL description was specified or a different one was requested explicitly by the requestor. Users can check which is the default SHELL specified in the PSI account with the following command: @@ -99,10 +89,10 @@ Users can check which is the default SHELL specified in the PSI account with the getent passwd $USER | awk -F: '{print $NF}' ``` -If SHELL does not correspond to the one you need to use, you should request a central change for it. +If SHELL does not correspond to the one you need to use, you should request a central change for it. This is because Merlin accounts are central PSI accounts. Hence, **change must be requested via [PSI Service Now](contact.md#psi-service-now)**. -Alternatively, if you work on other PSI Linux systems but for Merlin you need a different SHELL type, a temporary change can be performed during login startup. +Alternatively, if you work on other PSI Linux systems but for Merlin you need a different SHELL type, a temporary change can be performed during login startup. You can update one of the following files: * `~/.login` * `~/.profile` @@ -116,7 +106,7 @@ MY_SHELL=/bin/bash exec $MY_SHELL -l ``` -Notice that available *shells* can be found in the following file: +Notice that available *shells* can be found in the following file: ```bash cat /etc/shells diff --git a/docs/merlin6/99-support/migration-from-merlin5.md b/docs/merlin6/99-support/migration-from-merlin5.md index 1d4b10e..8c725a5 100644 --- a/docs/merlin6/99-support/migration-from-merlin5.md +++ b/docs/merlin6/99-support/migration-from-merlin5.md @@ -1,12 +1,4 @@ ---- -title: Migration From Merlin5 -#tags: -keywords: merlin5, merlin6, migration, rsync, archive, archiving, lts, long-term storage -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/migrating.html ---- +# Migration From Merlin5 ## Directories @@ -30,9 +22,10 @@ where: * **Block** is capacity size in GB and TB * **Files** is number of files + directories in Millions (M) * **Quota types** are the following: - * **USR**: Quota is setup individually per user name - * **GRP**: Quota is setup individually per Unix Group name - * **Fileset**: Quota is setup per project root directory. + * **USR**: Quota is setup individually per user name + * **GRP**: Quota is setup individually per Unix Group name + * **Fileset**: Quota is setup per project root directory. + * User data directory ``/data/user`` has a strict user block quota limit policy. If more disk space is required, 'project' must be created. * Soft quotas can be exceeded for short periods of time. Hard quotas cannot be exceeded. diff --git a/docs/merlin6/99-support/troubleshooting.md b/docs/merlin6/99-support/troubleshooting.md index 2efcd2e..d90f83e 100644 --- a/docs/merlin6/99-support/troubleshooting.md +++ b/docs/merlin6/99-support/troubleshooting.md @@ -1,15 +1,7 @@ ---- -title: Troubleshooting -#tags: -keywords: troubleshooting, problems, faq, known problems -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/troubleshooting.html ---- +# Troubleshooting -For troubleshooting, please contact us through the official channels. See [Contact](contact.md) -for more information. +For troubleshooting, please contact us through the official channels. See [Contact](contact.md) +for more information. ## Known Problems @@ -30,7 +22,7 @@ the following information: echo "Current location:"; pwd echo "User environment:"; env echo "List of PModules:"; module list - ``` + ``` 3. Whenever possible, provide the Slurm JobID. diff --git a/docs/merlin6/hardware-and-software-description.md b/docs/merlin6/hardware-and-software-description.md index de19689..597d320 100644 --- a/docs/merlin6/hardware-and-software-description.md +++ b/docs/merlin6/hardware-and-software-description.md @@ -1,25 +1,19 @@ ---- -title: Hardware And Software Description -#tags: -#keywords: -last_updated: 13 June 2019 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/hardware-and-software.html ---- +# Hardware And Software Description ## Hardware ### Computing Nodes The new Merlin6 cluster contains a solution based on **four** [**HPE Apollo k6000 Chassis**](https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00016641enw) + * *Three* of them contain 24 x [**HP Apollo XL230K Gen10**](https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00016634enw) blades. * A *fourth* chassis was purchased on 2021 with [**HP Apollo XL230K Gen10**](https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00016634enw) blades dedicated to few experiments. Blades have slighly different components depending on specific project requirements. The connectivity for the Merlin6 cluster is based on **ConnectX-5 EDR-100Gbps**, and each chassis contains: + * 1 x [HPE Apollo InfiniBand EDR 36-port Unmanaged Switch](https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00016643enw) - * 24 internal EDR-100Gbps ports (1 port per blade for internal low latency connectivity) - * 12 external EDR-100Gbps ports (for external for internal low latency connectivity) + * 24 internal EDR-100Gbps ports (1 port per blade for internal low latency connectivity) + * 12 external EDR-100Gbps ports (for external for internal low latency connectivity)
@@ -142,6 +136,7 @@ The connectivity is based on **ConnectX-5 EDR-100Gbps** for the new login nodes, ### Storage The storage node is based on the [Lenovo Distributed Storage Solution for IBM Spectrum Scale](https://lenovopress.com/lp0626-lenovo-distributed-storage-solution-for-ibm-spectrum-scale-x3650-m5). + * 2 x **Lenovo DSS G240** systems, each one composed by 2 IO Nodes **ThinkSystem SR650** mounting 4 x **Lenovo Storage D3284 High Density Expansion** enclosures. * Each IO node has a connectivity of 400Gbps (4 x EDR 100Gbps ports, 2 of them are **ConnectX-5** and 2 are **ConnectX-4**). @@ -151,11 +146,13 @@ The storage solution is connected to the HPC clusters through 2 x **Mellanox SB7 Merlin6 cluster connectivity is based on the [**Infiniband**](https://en.wikipedia.org/wiki/InfiniBand) technology. This allows fast access with very low latencies to the data as well as running extremely efficient MPI-based jobs: + * Connectivity amongst different computing nodes on different chassis ensures up to 1200Gbps of aggregated bandwidth. * Inter connectivity (communication amongst computing nodes in the same chassis) ensures up to 2400Gbps of aggregated bandwidth. * Communication to the storage ensures up to 800Gbps of aggregated bandwidth. Merlin6 cluster currently contains 5 Infiniband Managed switches and 3 Infiniband Unmanaged switches (one per HP Apollo chassis): + * 1 x **MSX6710** (FDR) for connecting old GPU nodes, old login nodes and MeG cluster to the Merlin6 cluster (and storage). No High Availability mode possible. * 2 x **MSB7800** (EDR) for connecting Login Nodes, Storage and other nodes in High Availability mode. * 3 x **HP EDR Unmanaged** switches, each one embedded to each HP Apollo k6000 chassis solution. @@ -164,8 +161,9 @@ Merlin6 cluster currently contains 5 Infiniband Managed switches and 3 Infiniban ## Software In Merlin6, we try to keep the latest software stack release to get the latest features and improvements. Due to this, **Merlin6** runs: + * [**RedHat Enterprise Linux 7**](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/7.9_release_notes/index) * [**Slurm**](https://slurm.schedmd.com/), we usually try to keep it up to date with the most recent versions. * [**GPFS v5**](https://www.ibm.com/support/knowledgecenter/en/STXKQY_5.0.2/ibmspectrumscale502_welcome.html) -* [**MLNX_OFED LTS v.5.2-2.2.0.0 or newer**](https://www.mellanox.com/products/infiniband-drivers/linux/mlnx_ofed) for all **ConnectX-5** or superior cards. - * [MLNX_OFED LTS v.4.9-2.2.4.0](https://www.mellanox.com/products/infiniband-drivers/linux/mlnx_ofed) is installed for remaining **ConnectX-3** and **ConnectIB** cards. +* [**MLNX_OFED LTS v.5.2-2.2.0.0 or newer**](https://www.mellanox.com/products/infiniband-drivers/linux/mlnx_ofed) for all **ConnectX-5** or superior cards. + * [MLNX_OFED LTS v.4.9-2.2.4.0](https://www.mellanox.com/products/infiniband-drivers/linux/mlnx_ofed) is installed for remaining **ConnectX-3** and **ConnectIB** cards. diff --git a/docs/merlin6/how-to-use-merlin/archive.md b/docs/merlin6/how-to-use-merlin/archive.md index c12e268..fc18829 100644 --- a/docs/merlin6/how-to-use-merlin/archive.md +++ b/docs/merlin6/how-to-use-merlin/archive.md @@ -41,20 +41,21 @@ Archiving can be done from any node accessible by the users (usually from the lo Below are the main steps for using the Data Catalog. * Ingest the dataset into the Data Catalog. This makes the data known to the Data Catalog system at PSI: - * Prepare a metadata file describing the dataset - * Run **`datasetIngestor`** script - * If necessary, the script will copy the data to the PSI archive servers + * Prepare a metadata file describing the dataset + * Run **`datasetIngestor`** script + * If necessary, the script will copy the data to the PSI archive servers * Usually this is necessary when archiving from directories other than **`/data/user`** or **`/data/project`**. It would be also necessary when the Merlin export server (**`merlin-archive.psi.ch`**) is down for any reason. * Archive the dataset: - * Visit [https://discovery.psi.ch](https://discovery.psi.ch) - * Click **`Archive`** for the dataset - * The system will now copy the data to the PetaByte Archive at CSCS + * Visit [) + * Click **`Archive`** for the dataset + * The system will now copy the data to the PetaByte Archive at CSCS + * Retrieve data from the catalog: - * Find the dataset on [https://discovery.psi.ch](https://discovery.psi.ch) and click **`Retrieve`** - * Wait for the data to be copied to the PSI retrieval system - * Run **`datasetRetriever`** script + * Find the dataset on [) and click **`Retrieve`** + * Wait for the data to be copied to the PSI retrieval system + * Run **`datasetRetriever`** script Since large data sets may take a lot of time to transfer, some steps are designed to happen in the background. The discovery website can be used to @@ -246,7 +247,7 @@ step will take a long time and may appear to have hung. You can check what files where UID is the dataset ID (12345678-1234-1234-1234-123456789012) and PATH is the absolute path to your data. Note that rsync creates directories first and that the transfer order is not alphabetical in some cases, but it should be possible to see whether any data has transferred. * There is currently a limit on the number of files per dataset (technically, the limit is from the total length of all file paths). It is recommended to break up datasets into 300'000 files or less. - * If it is not possible or desirable to split data between multiple datasets, an alternate work-around is to package files into a tarball. For datasets which are already compressed, omit the -z option for a considerable speedup: + * If it is not possible or desirable to split data between multiple datasets, an alternate work-around is to package files into a tarball. For datasets which are already compressed, omit the -z option for a considerable speedup: ```bash tar -f [output].tar [srcdir] @@ -266,7 +267,6 @@ step will take a long time and may appear to have hung. You can check what files /data/project/bio/myproject/archive $ datasetIngestor -copy -autoarchive -allowexistingsource -ingest metadata.json 2019/11/06 11:04:43 Latest version: 1.1.11 - 2019/11/06 11:04:43 Your version of this program is up-to-date 2019/11/06 11:04:43 You are about to add a dataset to the === production === data catalog environment... 2019/11/06 11:04:43 Your username: @@ -316,7 +316,6 @@ user_n@pb-archive.psi.ch's password: 2019/11/06 11:05:04 The source folder /data/project/bio/myproject/archive is not centrally available (decentral use case). The data must first be copied to a rsync cache server. - 2019/11/06 11:05:04 Do you want to continue (Y/n)? Y 2019/11/06 11:05:09 Created dataset with id 12.345.67890/12345678-1234-1234-1234-123456789012 diff --git a/docs/merlin6/how-to-use-merlin/connect-from-macos.md b/docs/merlin6/how-to-use-merlin/connect-from-macos.md index 8cdbc88..d02e5d3 100644 --- a/docs/merlin6/how-to-use-merlin/connect-from-macos.md +++ b/docs/merlin6/how-to-use-merlin/connect-from-macos.md @@ -1,12 +1,4 @@ ---- -title: Connecting from a MacOS Client -#tags: -keywords: MacOS, mac os, mac, connecting, client, configuration, SSH, X11 -last_updated: 07 September 2022 -summary: "This document describes a recommended setup for a MacOS client." -sidebar: merlin6_sidebar -permalink: /merlin6/connect-from-macos.html ---- +# Connecting from a MacOS Client ## SSH without X11 Forwarding diff --git a/docs/merlin6/how-to-use-merlin/connect-from-windows.md b/docs/merlin6/how-to-use-merlin/connect-from-windows.md index 4800d1a..8a60b23 100644 --- a/docs/merlin6/how-to-use-merlin/connect-from-windows.md +++ b/docs/merlin6/how-to-use-merlin/connect-from-windows.md @@ -1,18 +1,12 @@ ---- -title: Connecting from a Windows Client -keywords: microsoft, mocosoft, windows, putty, xming, connecting, client, configuration, SSH, X11 -last_updated: 07 September 2022 -summary: "This document describes a recommended setup for a Windows client." -sidebar: merlin6_sidebar -permalink: /merlin6/connect-from-windows.html ---- +# Connecting from a Windows Client ## SSH with PuTTY without X11 Forwarding PuTTY is one of the most common tools for SSH. -Check, if the following software packages are installed on the Windows workstation by +Check, if the following software packages are installed on the Windows workstation by inspecting the *Start* menu (hint: use the *Search* box to save time): + * PuTTY (should be already installed) * *[Optional]* Xming (needed for [SSH with X11 Forwarding](#ssh-with-putty-with-x11-forwarding)) @@ -28,7 +22,6 @@ If they are missing, you can install them using the Software Kiosk icon on the D ![Create Merlin Session](../../images/PuTTY/Putty_Session.png) - ## SSH with PuTTY with X11 Forwarding Official X11 Forwarding support is through NoMachine. Please follow the document diff --git a/docs/merlin6/how-to-use-merlin/kerberos.md b/docs/merlin6/how-to-use-merlin/kerberos.md index b15d10b..cc691a3 100644 --- a/docs/merlin6/how-to-use-merlin/kerberos.md +++ b/docs/merlin6/how-to-use-merlin/kerberos.md @@ -1,26 +1,17 @@ ---- -title: Kerberos and AFS authentication -#tags: -keywords: kerberos, AFS, kinit, klist, keytab, tickets, connecting, client, configuration, slurm -last_updated: 07 September 2022 -summary: "This document describes how to use Kerberos." -sidebar: merlin6_sidebar -permalink: /merlin6/kerberos.html ---- +# Kerberos and AFS authentication Projects and users have their own areas in the central PSI AFS service. In order -to access to these areas, valid Kerberos and AFS tickets must be granted. +to access to these areas, valid Kerberos and AFS tickets must be granted. -These tickets are automatically granted when accessing through SSH with +These tickets are automatically granted when accessing through SSH with username and password. Alternatively, one can get a granting ticket with the `kinit` (Kerberos) and `aklog` (AFS ticket, which needs to be run after `kinit`) commands. -Due to PSI security policies, the maximum lifetime of the ticket is 7 days, and the default -time is 10 hours. It means than one needs to constantly renew (`krenew` command) the existing +Due to PSI security policies, the maximum lifetime of the ticket is 7 days, and the default +time is 10 hours. It means than one needs to constantly renew (`krenew` command) the existing granting tickets, and their validity can not be extended longer than 7 days. At this point, one needs to obtain new granting tickets. - ## Obtaining granting tickets with username and password As already described above, the most common use case is to obtain Kerberos and AFS granting tickets @@ -28,8 +19,9 @@ by introducing username and password: * When login to Merlin through SSH protocol, if this is done with username + password authentication, tickets for Kerberos and AFS will be automatically obtained. * When login to Merlin through NoMachine, no Kerberos and AFS are granted. Therefore, users need to + run `kinit` (to obtain a granting Kerberos ticket) followed by `aklog` (to obtain a granting AFS ticket). -See further details below. +See further details below. To manually obtain granting tickets, one has to: 1. To obtain a granting Kerberos ticket, one needs to run `kinit $USER` and enter the PSI password. @@ -49,16 +41,16 @@ klist ```bash krenew ``` - * Keep in mind that the maximum lifetime for granting tickets is 7 days, therefore `krenew` can not be used beyond that limit, + * Keep in mind that the maximum lifetime for granting tickets is 7 days, therefore `krenew` can not be used beyond that limit, and then `kinit` should be used instead. - ## Obtanining granting tickets with keytab -Sometimes, obtaining granting tickets by using password authentication is not possible. An example are user Slurm jobs -requiring access to private areas in AFS. For that, there's the possibility to generate a **keytab** file. +Sometimes, obtaining granting tickets by using password authentication is not possible. An example are user Slurm jobs +requiring access to private areas in AFS. For that, there's the possibility to generate a **keytab** file. + +Be aware that the **keytab** file must be **private**, **fully protected** by correct permissions and not shared with any -Be aware that the **keytab** file must be **private**, **fully protected** by correct permissions and not shared with any other users. ### Creating a keytab file @@ -70,6 +62,7 @@ For generating a **keytab**, one has to: module load krb5/1.20 ``` 2. Create a private directory for storing the Kerberos **keytab** file + ```bash mkdir -p ~/.k5 ``` @@ -78,6 +71,7 @@ mkdir -p ~/.k5 ktutil ``` 4. In the `ktutil` console, one has to generate a **keytab** file as follows: + ```bash # Replace $USER by your username add_entry -password -k 0 -f -p $USER @@ -85,6 +79,7 @@ wkt /psi/home/$USER/.k5/krb5.keytab exit ``` Notice that you will need to add your password once. This step is required for generating the **keytab** file. + 5. Once back to the main shell, one has to ensure that the file contains the proper permissions: ```bash chmod 0600 ~/.k5/krb5.keytab @@ -112,14 +107,17 @@ The steps should be the following: export KRB5CCNAME="$(mktemp "$HOME/.k5/krb5cc_XXXXXX")" ``` * To obtain a Kerberos5 granting ticket, run `kinit` by using your keytab: + ```bash kinit -kt "$HOME/.k5/krb5.keytab" $USER@D.PSI.CH ``` * To obtain a granting AFS ticket, run `aklog`: + ```bash aklog ``` -* At the end of the job, you can remove destroy existing Kerberos tickets. +* At the end of the job, you can remove destroy existing Kerberos tickets. + ```bash kdestroy ``` @@ -137,7 +135,7 @@ This is the **recommended** way. At the end of the job, is strongly recommended #SBATCH --output=run.out # Generate custom output file #SBATCH --error=run.err # Generate custom error file #SBATCH --nodes=1 # Uncomment and specify #nodes to use -#SBATCH --ntasks=1 # Uncomment and specify #nodes to use +#SBATCH --ntasks=1 # Uncomment and specify #nodes to use #SBATCH --cpus-per-task=1 #SBATCH --constraint=xeon-gold-6152 #SBATCH --hint=nomultithread diff --git a/docs/merlin6/how-to-use-merlin/nomachine.md b/docs/merlin6/how-to-use-merlin/nomachine.md index 6ede798..248d4bb 100644 --- a/docs/merlin6/how-to-use-merlin/nomachine.md +++ b/docs/merlin6/how-to-use-merlin/nomachine.md @@ -103,5 +103,5 @@ These settings prevent "bluriness" at the cost of some performance! (You might w * Display > Resize remote display (forces 1:1 pixel sizes) * Display > Change settings > Quality: Choose Medium-Best Quality * Display > Change settings > Modify advanced settings - * Check: Disable network-adaptive display quality (diables lossy compression) - * Check: Disable client side image post-processing + * Check: Disable network-adaptive display quality (diables lossy compression) + * Check: Disable client side image post-processing diff --git a/docs/merlin6/how-to-use-merlin/ssh-keys.md b/docs/merlin6/how-to-use-merlin/ssh-keys.md index 1a449b0..ae19e83 100644 --- a/docs/merlin6/how-to-use-merlin/ssh-keys.md +++ b/docs/merlin6/how-to-use-merlin/ssh-keys.md @@ -1,13 +1,4 @@ ---- -title: Configuring SSH Keys in Merlin - -#tags: -keywords: linux, connecting, client, configuration, SSH, Keys, SSH-Keys, RSA, authorization, authentication -last_updated: 15 Jul 2020 -summary: "This document describes how to deploy SSH Keys in Merlin." -sidebar: merlin6_sidebar -permalink: /merlin6/ssh-keys.html ---- +# Configuring SSH Keys in Merlin Merlin users sometimes will need to access the different Merlin services without being constantly requested by a password. One can achieve that with Kerberos authentication, however in some cases some software would require the setup of SSH Keys. @@ -22,14 +13,15 @@ User can check whether a SSH key already exists. These would be placed in the ** is usually the default one, and files in there would be **`id_rsa`** (private key) and **`id_rsa.pub`** (public key). ```bash -ls ~/.ssh/id* +ls ~/.ssh/id* ``` For creating **SSH RSA Keys**, one should: 1. Run `ssh-keygen`, a password will be requested twice. You **must remember** this password for the future. - * Due to security reasons, ***always try protecting it with a password***. There is only one exception, when running ANSYS software, which in general should not use password to simplify the way of running the software in Slurm. - * This will generate a private key **id_rsa**, and a public key **id_rsa.pub** in your **~/.ssh** directory. + * Due to security reasons, ***always try protecting it with a password***. There is only one exception, when running ANSYS software, which in general should not use password to simplify the way of running the software in Slurm. + * This will generate a private key **id_rsa**, and a public key **id_rsa.pub** in your **~/.ssh** directory. + 2. Add your public key to the **`authorized_keys`** file, and ensure proper permissions for that file, as follows: ```bash cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys @@ -57,16 +49,16 @@ For creating **SSH RSA Keys**, one should: ### Using Authentication Agent in SSH session -By default, when accessing the login node via SSH (with `ForwardAgent=yes`), it will automatically add your +By default, when accessing the login node via SSH (with `ForwardAgent=yes`), it will automatically add your SSH Keys to the authentication agent. Hence, no actions should not be needed by the user. One can configure `ForwardAgent=yes` as follows: - * **(Recommended)** In your local Linux (workstation, laptop or desktop) add the following line in the - `$HOME/.ssh/config` (or alternatively in `/etc/ssh/ssh_config`) file: + * **(Recommended)** In your local Linux (workstation, laptop or desktop) add the following line in the + `$HOME/.ssh/config` (or alternatively in `/etc/ssh/ssh_config`) file: ``` ForwardAgent yes ``` - * Alternatively, on each SSH you can add the option `ForwardAgent=yes` in the SSH command. In example: + * Alternatively, on each SSH you can add the option `ForwardAgent=yes` in the SSH command. In example: ```bash ssh -XY -o ForwardAgent=yes merlin-l-001.psi.ch ``` @@ -74,12 +66,12 @@ SSH Keys to the authentication agent. Hence, no actions should not be needed by If `ForwardAgent` is not enabled as shown above, one needs to run the authentication agent and then add your key to the **ssh-agent**. This must be done once per SSH session, as follows: - * Run `eval $(ssh-agent -s)` to run the **ssh-agent** in that SSH session - * Check whether the authentication agent has your key already added: + * Run `eval $(ssh-agent -s)` to run the **ssh-agent** in that SSH session + * Check whether the authentication agent has your key already added: ```bash ssh-add -l | grep "/psi/home/$(whoami)/.ssh" ``` - * If no key is returned in the previous step, you have to add the private key identity to the authentication agent. + * If no key is returned in the previous step, you have to add the private key identity to the authentication agent. You will be requested for the **passphrase** of your key, and it can be done by running: ```bash ssh-add @@ -96,7 +88,7 @@ However, for NoMachine one always need to add the private key identity to the au ```bash ssh-add -l | grep "/psi/home/$(whoami)/.ssh" ``` -2. If no key is returned in the previous step, you have to add the private key identity to the authentication agent. +2. If no key is returned in the previous step, you have to add the private key identity to the authentication agent. You will be requested for the **passphrase** of your key, and it can be done by running: ```bash ssh-add diff --git a/docs/merlin6/how-to-use-merlin/storage.md b/docs/merlin6/how-to-use-merlin/storage.md index 891538a..0f0e58a 100644 --- a/docs/merlin6/how-to-use-merlin/storage.md +++ b/docs/merlin6/how-to-use-merlin/storage.md @@ -7,7 +7,8 @@ This document describes the different directories of the Merlin6 cluster. ### User and project data * ***Users are responsible for backing up their own data***. Is recommended to backup the data on third party independent systems (i.e. LTS, Archive, AFS, SwitchDrive, Windows Shares, etc.). - * **`/psi/home`**, as this contains a small amount of data, is the only directory where we can provide daily snapshots for one week. This can be found in the following directory **`/psi/home/.snapshot/`** + * **`/psi/home`**, as this contains a small amount of data, is the only directory where we can provide daily snapshots for one week. This can be found in the following directory **`/psi/home/.snapshot/`** + * ***When a user leaves PSI, she or her supervisor/team are responsible to backup and move the data out from the cluster***: every few months, the storage space will be recycled for those old users who do not have an existing and valid PSI account. !!! warning @@ -31,13 +32,15 @@ merlin_quotas Merlin6 offers the following directory classes for users: * ``/psi/home/``: Private user **home** directory + * ``/data/user/``: Private user **data** directory * ``/data/project/general/``: Shared **Project** directory - * For BIO experiments, a dedicated ``/data/project/bio/$projectname`` exists. + * For BIO experiments, a dedicated ``/data/project/bio/$projectname`` exists. + * ``/scratch``: Local *scratch* disk (only visible by the node running a job). * ``/shared-scratch``: Shared *scratch* disk (visible from all nodes). * ``/export``: Export directory for data transfer, visible from `ra-merlin-01.psi.ch`, `ra-merlin-02.psi.ch` and Merlin login nodes. - * Refer to **[Transferring Data](../how-to-use-merlin/transfer-data.md)** for more information about the export area and data transfer service. + * Refer to **[Transferring Data](../how-to-use-merlin/transfer-data.md)** for more information about the export area and data transfer service. !!! tip @@ -65,7 +68,7 @@ Properties of the directory classes: The use of **scratch** and **export** areas as an extension of the quota _is forbidden_. **scratch** and **export** areas _must not contain_ final - data. + data. **_Auto cleanup policies_** in the **scratch** and **export** areas are applied. @@ -94,7 +97,8 @@ quota -s * Read **[Important: Code of Conduct](../quick-start-guide/code-of-conduct.md)** for more information about Merlin6 policies. * Is **forbidden** to use the home directories for IO intensive tasks - * Use `/scratch`, `/shared-scratch`, `/data/user` or `/data/project` for this purpose. + * Use `/scratch`, `/shared-scratch`, `/data/user` or `/data/project` for this purpose. + * Users can retrieve up to 1 week of their lost data thanks to the automatic **daily snapshots for 1 week**. Snapshots can be accessed at this path: @@ -121,7 +125,8 @@ mmlsquota -u --block-size auto merlin-user * Read **[Important: Code of Conduct](../quick-start-guide/code-of-conduct.md)** for more information about Merlin6 policies. * Is **forbidden** to use the data directories as ``scratch`` area during a job runtime. - * Use ``/scratch``, ``/shared-scratch`` for this purpose. + * Use ``/scratch``, ``/shared-scratch`` for this purpose. + * No backup policy is applied for user data directories: users are responsible for backing up their data. ### Project data directory @@ -178,7 +183,7 @@ The properties of the available scratch storage spaces are given in the followin * Read **[Important: Code of Conduct](../quick-start-guide/code-of-conduct.md)** for more information about Merlin6 policies. * By default, *always* use **local** first and only use **shared** if your specific use case requires it. * Temporary files *must be deleted at the end of the job by the user*. - * Remaining files will be deleted by the system if detected. + * Remaining files will be deleted by the system if detected. * Files not accessed within 28 days will be automatically cleaned up by the system. * If for some reason the scratch areas get full, admins have the rights to cleanup the oldest data. @@ -190,6 +195,6 @@ Please read **[Transferring Data](../how-to-use-merlin/transfer-data.md)** for m #### Export directory policy * Temporary files *must be deleted at the end of the job by the user*. - * Remaining files will be deleted by the system if detected. + * Remaining files will be deleted by the system if detected. * Files not accessed within 28 days will be automatically cleaned up by the system. * If for some reason the export area gets full, admins have the rights to cleanup the oldest data diff --git a/docs/merlin6/how-to-use-merlin/transfer-data.md b/docs/merlin6/how-to-use-merlin/transfer-data.md index 7d142eb..8516173 100644 --- a/docs/merlin6/how-to-use-merlin/transfer-data.md +++ b/docs/merlin6/how-to-use-merlin/transfer-data.md @@ -1,12 +1,4 @@ ---- -title: Transferring Data -#tags: -keywords: transferring data, data transfer, rsync, winscp, copy data, copying, sftp, import, export, hopx, vpn -last_updated: 24 August 2023 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/transfer-data.html ---- +# Transferring Data ## Overview @@ -24,7 +16,6 @@ visibility. - Systems on the internet can access the [PSI Data Transfer](https://www.psi.ch/en/photon-science-data-services/data-transfer) service `datatransfer.psi.ch`, using ssh-based protocols and [Globus](https://www.globus.org/) - ## Direct transfer via Merlin6 login nodes The following methods transfer data directly via the [login @@ -50,7 +41,6 @@ rsync -avAHXS ~/localdata user@merlin-l-01.psi.ch:/data/project/general/myprojec You can resume interrupted transfers by simply rerunning the command. Previously transferred files will be skipped. - ### WinSCP The WinSCP tool can be used for remote file transfer on Windows. It is available @@ -64,7 +54,7 @@ local computer and merlin. Authentication of users is provided through SimpleSAMLphp, supporting SAML2, LDAP and RADIUS and more. Users without an account can be sent an upload voucher by an authenticated user. FileSender is developed to the requirements of the higher education and research community. -The purpose of the software is to send a large file to someone, have that file available for download for a certain number of downloads and/or a certain amount of time, and after that automatically delete the file. The software is not intended as a permanent file publishing platform. +The purpose of the software is to send a large file to someone, have that file available for download for a certain number of downloads and/or a certain amount of time, and after that automatically delete the file. The software is not intended as a permanent file publishing platform. **[SWITCHfilesender](https://filesender.switch.ch/filesender2/?s=upload)** is fully integrated with PSI, therefore, PSI employees can log in by using their PSI account (through Authentication and Authorization Infrastructure / AAI, by selecting PSI as the institution to be used for log in). @@ -82,11 +72,13 @@ Notice that `datatransfer.psi.ch` does not allow SSH login, only `rsync`, `scp` The following filesystems are mounted: * `/merlin/export` which points to the `/export` directory in Merlin. -* `/merlin/data/experiment/mu3e` which points to the `/data/experiment/mu3e` directories in Merlin. - * Mu3e sub-directories are mounted in RW (read-write), except for `data` (read-only mounted) +* `/merlin/data/experiment/mu3e` which points to the `/data/experiment/mu3e` directories in Merlin. + * Mu3e sub-directories are mounted in RW (read-write), except for `data` (read-only mounted) + * `/merlin/data/project/general` which points to the `/data/project/general` directories in Merlin. - * Owners of Merlin projects should request explicit access to it. - * Currently, only `CSCS` is available for transferring files between PizDaint/Alps and Merlin + * Owners of Merlin projects should request explicit access to it. + * Currently, only `CSCS` is available for transferring files between PizDaint/Alps and Merlin + * `/merlin/data/project/bio` which points to the `/data/project/bio` directories in Merlin. * `/merlin/data/user` which points to the `/data/user` directories in Merlin. @@ -120,16 +112,17 @@ Transferring big amounts of data from outside PSI to Merlin is always possible t ##### Exporting data from Merlin For exporting data from Merlin to outside PSI by using `/export`, one has to: - * From a Merlin login node, copy your data from any directory (i.e. `/data/project`, `/data/user`, `/scratch`) to + * From a Merlin login node, copy your data from any directory (i.e. `/data/project`, `/data/user`, `/scratch`) to `/export`. Ensure to properly secure your directories and files with proper permissions. - * Once data is copied, from **`datatransfer.psi.ch`**, copy the data from `/merlin/export` to outside PSI + * Once data is copied, from **`datatransfer.psi.ch`**, copy the data from `/merlin/export` to outside PSI ##### Importing data to Merlin For importing data from outside PSI to Merlin by using `/export`, one has to: - * From **`datatransfer.psi.ch`**, copy the data from outside PSI to `/merlin/export`. + * From **`datatransfer.psi.ch`**, copy the data from outside PSI to `/merlin/export`. + Ensure to properly secure your directories and files with proper permissions. - * Once data is copied, from a Merlin login node, copy your data from `/export` to any directory (i.e. `/data/project`, `/data/user`, `/scratch`). + * Once data is copied, from a Merlin login node, copy your data from `/export` to any directory (i.e. `/data/project`, `/data/user`, `/scratch`). #### Request access to your project directory @@ -144,10 +137,10 @@ Merlin6 is fully accessible from within the PSI network. To connect from outside - [VPN](https://www.psi.ch/en/computing/vpn) ([alternate instructions](https://intranet.psi.ch/BIO/ComputingVPN)) - [SSH hopx](https://www.psi.ch/en/computing/ssh-hop) - * Please avoid transferring big amount data through **hopx** + * Please avoid transferring big amount data through **hopx** - [No Machine](nomachine.md) - * Remote Interactive Access through [**'rem-acc.psi.ch'**](https://www.psi.ch/en/photon-science-data-services/remote-interactive-access) - * Please avoid transferring big amount of data through **NoMachine** + * Remote Interactive Access through [**'rem-acc.psi.ch'**](https://www.psi.ch/en/photon-science-data-services/remote-interactive-access) + * Please avoid transferring big amount of data through **NoMachine** ## Connecting from Merlin6 to outside file shares @@ -161,5 +154,4 @@ provides a helpful wrapper over the Gnome storage utilities, and provides suppor - FTP, SFTP - [others](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_the_desktop_environment_in_rhel_8/managing-storage-volumes-in-gnome_using-the-desktop-environment-in-rhel-8#gvfs-back-ends_managing-storage-volumes-in-gnome) - [More instruction on using `merlin_rmount`](../software-support/merlin-rmount.md) diff --git a/docs/merlin6/how-to-use-merlin/using-modules.md b/docs/merlin6/how-to-use-merlin/using-modules.md index 9005fa1..a0cb5e0 100644 --- a/docs/merlin6/how-to-use-merlin/using-modules.md +++ b/docs/merlin6/how-to-use-merlin/using-modules.md @@ -1,17 +1,8 @@ ---- -#tags: -keywords: Pmodules, software, stable, unstable, deprecated, overlay, overlays, release stage, module, package, packages, library, libraries -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin6_sidebar -permalink: /merlin6/using-modules.html ---- - # Using PModules ## Environment Modules -On top of the operating system stack we provide different software using the PSI developed PModule system. +On top of the operating system stack we provide different software using the PSI developed PModule system. PModules is the official supported way and each package is deployed by a specific expert. Usually, in PModules software which is used by many people will be found. @@ -79,8 +70,8 @@ module use overlay_merlin ``` Then, once `overlay_merlin` is invoked, it will disable central software installations with the same version (if exist), and will be replaced -by the local ones in Merlin. Releases from the central Pmodules repository which do not have a copy in the Merlin overlay will remain -visible. In example, for each ANSYS release, one can identify where it is installed by searching ANSYS in PModules with the `--verbose` +by the local ones in Merlin. Releases from the central Pmodules repository which do not have a copy in the Merlin overlay will remain +visible. In example, for each ANSYS release, one can identify where it is installed by searching ANSYS in PModules with the `--verbose` option. This will show the location of the different ANSYS releases as follows: * For ANSYS releases installed in the central repositories, the path starts with `/opt/psi` * For ANSYS releases installed in the Merlin6 repository (and/or overwritting the central ones), the path starts with `/data/software/pmodules` diff --git a/docs/merlin6/index.md b/docs/merlin6/index.md index 9906566..560a5db 100644 --- a/docs/merlin6/index.md +++ b/docs/merlin6/index.md @@ -4,16 +4,18 @@ * The new Slurm CPU cluster is called **`merlin6`**. * The new Slurm GPU cluster is called [**`gmerlin6`**](../gmerlin6/cluster-introduction.md) -* The old Slurm *merlin* cluster is still active and best effort support is provided. +* The old Slurm *merlin* cluster is still active and best effort support is provided. + The cluster, was renamed as [**merlin5**](../merlin5/cluster-introduction.md). -From July 2019, **`merlin6`** becomes the **default Slurm cluster** and any job submitted from the login node will be submitted to that cluster if not . +From July 2019, **`merlin6`** becomes the **default Slurm cluster** and any job submitted from the login node will be submitted to that cluster if not. + * Users can keep submitting to the old *`merlin5`* computing nodes by using the option ``--cluster=merlin5``. * Users submitting to the **`gmerlin6`** GPU cluster need to specify the option ``--cluster=gmerlin6``. ### Slurm 'merlin6' **CPU nodes** are configured in a **Slurm** cluster, called **`merlin6`**, and -this is the _**default Slurm cluster**_. Hence, by default, if no Slurm cluster is +this is the ***default Slurm cluster***. Hence, by default, if no Slurm cluster is specified (with the `--cluster` option), this will be the cluster to which the jobs will be sent. diff --git a/docs/merlin6/quick-start-guide/accessing-interactive-nodes.md b/docs/merlin6/quick-start-guide/accessing-interactive-nodes.md index d0b654b..297c551 100644 --- a/docs/merlin6/quick-start-guide/accessing-interactive-nodes.md +++ b/docs/merlin6/quick-start-guide/accessing-interactive-nodes.md @@ -7,10 +7,10 @@ applications (e.g. a text editor, but for more performant graphical access, refe in the login nodes and X11 forwarding can be used for those users who have properly configured X11 support in their desktops, however: * Merlin6 administrators **do not offer support** for user desktop configuration (Windows, MacOS, Linux). - * Hence, Merlin6 administrators **do not offer official support** for X11 client setup. - * Nevertheless, a generic guide for X11 client setup (*Linux*, *Windows* and *MacOS*) is provided below. + * Hence, Merlin6 administrators **do not offer official support** for X11 client setup. + * Nevertheless, a generic guide for X11 client setup (*Linux*, *Windows* and *MacOS*) is provided below. * PSI desktop configuration issues must be addressed through **[PSI Service Now](https://psi.service-now.com/psisp)** as an *Incident Request*. - * Ticket will be redirected to the corresponding Desktop support group (Windows, Linux). + * Ticket will be redirected to the corresponding Desktop support group (Windows, Linux). ### Accessing from a Linux client diff --git a/docs/merlin6/quick-start-guide/code-of-conduct.md b/docs/merlin6/quick-start-guide/code-of-conduct.md index 4ab4a59..6cd3b95 100644 --- a/docs/merlin6/quick-start-guide/code-of-conduct.md +++ b/docs/merlin6/quick-start-guide/code-of-conduct.md @@ -10,25 +10,27 @@ The basic principle is courtesy and consideration for other users. ## Interactive nodes * The interactive nodes (also known as login nodes) are for development and quick testing: - * It is **strictly forbidden to run production jobs** on the login nodes. All production jobs must + * It is **strictly forbidden to run production jobs** on the login nodes. All production jobs must be submitted to the batch system. - * It is **forbidden to run long processes** occupying big parts of a login node's resources. - * According to the previous rules, **misbehaving running processes will have to be killed.** + * It is **forbidden to run long processes** occupying big parts of a login node's resources. + * According to the previous rules, **misbehaving running processes will have to be killed.** in order to keep the system responsive for other users. ## Batch system * Make sure that no broken or run-away processes are left when your job is done. Keep the process space clean on all nodes. * During the runtime of a job, it is mandatory to use the ``/scratch`` and ``/shared-scratch`` partitions for temporary data: - * It is **forbidden** to use the ``/data/user``, ``/data/project`` or ``/psi/home/`` for that purpose. - * Always remove files you do not need any more (e.g. core dumps, temporary files) as early as possible. Keep the disk space clean on all nodes. - * Prefer ``/scratch`` over ``/shared-scratch`` and use the latter only when you require the temporary files to be visible from multiple nodes. + * It is **forbidden** to use the ``/data/user``, ``/data/project`` or ``/psi/home/`` for that purpose. + * Always remove files you do not need any more (e.g. core dumps, temporary files) as early as possible. Keep the disk space clean on all nodes. + * Prefer ``/scratch`` over ``/shared-scratch`` and use the latter only when you require the temporary files to be visible from multiple nodes. + * Read the description in **[Merlin6 directory structure](../how-to-use-merlin/storage.md#merlin6-directories)** for learning about the correct usage of each partition type. ## User and project data * ***Users are responsible for backing up their own data***. Is recommended to backup the data on third party independent systems (i.e. LTS, Archive, AFS, SwitchDrive, Windows Shares, etc.). - * **`/psi/home`**, as this contains a small amount of data, is the only directory where we can provide daily snapshots for one week. This can be found in the following directory **`/psi/home/.snapshot/`** + * **`/psi/home`**, as this contains a small amount of data, is the only directory where we can provide daily snapshots for one week. This can be found in the following directory **`/psi/home/.snapshot/`** + * ***When a user leaves PSI, she or her supervisor/team are responsible to backup and move the data out from the cluster***: every few months, the storage space will be recycled for those old users who do not have an existing and valid PSI account. !!! warning @@ -41,8 +43,8 @@ The basic principle is courtesy and consideration for other users. * The system administrator has the right to temporarily block the access to Merlin6 for an account violating the Code of Conduct in order to maintain the efficiency and stability of the system. - * Repetitive violations by the same user will be escalated to the user's supervisor. + * Repetitive violations by the same user will be escalated to the user's supervisor. * The system administrator has the right to delete files in the **scratch** directories - * after a job, if the job failed to clean up its files. - * during the job in order to prevent a job from destabilizing a node or multiple nodes. + * after a job, if the job failed to clean up its files. + * during the job in order to prevent a job from destabilizing a node or multiple nodes. * The system administrator has the right to kill any misbehaving running processes. diff --git a/docs/merlin6/quick-start-guide/introduction.md b/docs/merlin6/quick-start-guide/introduction.md index e20e7f0..ac410c9 100644 --- a/docs/merlin6/quick-start-guide/introduction.md +++ b/docs/merlin6/quick-start-guide/introduction.md @@ -9,8 +9,8 @@ At present, the **Merlin local HPC cluster** contains _two_ generations of it: * the old **Merlin5** cluster (`merlin5` Slurm cluster), and * the newest generation **Merlin6**, which is divided in two Slurm clusters: - * `merlin6` as the Slurm CPU cluster - * `gmerlin6` as the Slurm GPU cluster. + * `merlin6` as the Slurm CPU cluster + * `gmerlin6` as the Slurm GPU cluster. Access to the different Slurm clusters is possible from the [**Merlin login nodes**](accessing-interactive-nodes.md), which can be accessed through the [SSH protocol](accessing-interactive-nodes.md#ssh-access) or the [NoMachine (NX) service](../how-to-use-merlin/nomachine.md). @@ -42,9 +42,9 @@ by the BIO Division and by Deep Leaning project. These computational resources are split into **two** different **[Slurm](https://slurm.schedmd.com/overview.html)** clusters: * The Merlin6 CPU nodes are in a dedicated **[Slurm](https://slurm.schedmd.com/overview.html)** cluster called [**`merlin6`**](../slurm-configuration.md). - * This is the **default Slurm cluster** configured in the login nodes: any job submitted without the option `--cluster` will be submited to this cluster. + * This is the **default Slurm cluster** configured in the login nodes: any job submitted without the option `--cluster` will be submited to this cluster. * The Merlin6 GPU resources are in a dedicated **[Slurm](https://slurm.schedmd.com/overview.html)** cluster called [**`gmerlin6`**](../../gmerlin6/slurm-configuration.md). - * Users submitting to the **`gmerlin6`** GPU cluster need to specify the option ``--cluster=gmerlin6``. + * Users submitting to the **`gmerlin6`** GPU cluster need to specify the option ``--cluster=gmerlin6``. ### Merlin5 diff --git a/docs/merlin6/quick-start-guide/requesting-projects.md b/docs/merlin6/quick-start-guide/requesting-projects.md index 0c32df7..a545f10 100644 --- a/docs/merlin6/quick-start-guide/requesting-projects.md +++ b/docs/merlin6/quick-start-guide/requesting-projects.md @@ -43,9 +43,9 @@ The owner of the group is the person who will be allowed to modify the group. ```text Dear HelpDesk - + I would like to request a new unix group. - + Unix Group Name: unx-xxxxx Initial Group Members: xxxxx, yyyyy, zzzzz, ... Group Owner: xxxxx @@ -93,16 +93,16 @@ To request a project, please provide the following information in a **[PSI Servi ```text Dear HelpDesk - + I would like to request a new Merlin6 project. - + Project Name: xxxxx UnixGroup: xxxxx # Must be an existing Unix Group The project responsible is the Owner of the Unix Group. If you need a storage quota exceeding the defaults, please provide a description and motivation for the higher storage needs: - + Storage Quota: 1TB with a maximum of 1M Files Reason: (None for default 1TB/1M) diff --git a/docs/merlin6/slurm-configuration.md b/docs/merlin6/slurm-configuration.md index 6857097..8a52999 100644 --- a/docs/merlin6/slurm-configuration.md +++ b/docs/merlin6/slurm-configuration.md @@ -1,12 +1,4 @@ ---- -title: Slurm Configuration -#tags: -keywords: configuration, partitions, node definition -last_updated: 29 January 2021 -summary: "This document describes a summary of the Merlin6 configuration." -sidebar: merlin6_sidebar -permalink: /merlin6/slurm-configuration.html ---- +# Slurm Configuration This documentation shows basic Slurm configuration and options needed to run jobs in the Merlin6 CPU cluster. @@ -23,11 +15,12 @@ The following table show default and maximum resources that can be used per node | merlin-c-[313-318] | 1 core | 44 cores | 1 | 748800 | 748800 | 10000 | N/A | N/A | | merlin-c-[319-324] | 1 core | 44 cores | 2 | 748800 | 748800 | 10000 | N/A | N/A | -If nothing is specified, by default each core will use up to 8GB of memory. Memory can be increased with the `--mem=` and +If nothing is specified, by default each core will use up to 8GB of memory. Memory can be increased with the `--mem=` and `--mem-per-cpu=` options, and maximum memory allowed is `Max.Mem/Node`. In **`merlin6`**, Memory is considered a Consumable Resource, as well as the CPU. Hence, both resources will account when submitting a job, and by default resources can not be oversubscribed. This is a main difference with the old **`merlin5`** cluster, when only CPU were accounted, + and memory was by default oversubscribed. !!! tip "Check Configuration" @@ -66,12 +59,12 @@ The following *partitions* (also known as *queues*) are configured in Slurm: | **asa-ansys** | 1 hour | 90 days | unlimited | 1000 | 4 | 15600 | | **mu3e** | 1 day | 7 days | unlimited | 1000 | 4 | 3712 | -\*The **PriorityJobFactor** value will be added to the job priority (*PARTITION* column in `sprio -l` ). In other words, jobs sent to higher priority +The **PriorityJobFactor** value will be added to the job priority (**PARTITION** column in `sprio -l` ). In other words, jobs sent to higher priority partitions will usually run first (however, other factors such like **job age** or mainly **fair share** might affect to that decision). For the GPU partitions, Slurm will also attempt first to allocate jobs on partitions with higher priority over partitions with lesser priority. -**\*\***Jobs submitted to a partition with a higher **PriorityTier** value will be dispatched before pending jobs in partition with lower *PriorityTier* value -and, if possible, they will preempt running jobs from partitions with lower *PriorityTier* values. +Jobs submitted to a partition with a higher **PriorityTier** value will be dispatched before pending jobs in partition with lower *PriorityTier* value +and, if possible, they will preempt running jobs from partitions with lower **PriorityTier** values. * The **`general`** partition is the **default**. It can not have more than 50 nodes running jobs. * For **`daily`** this limitation is extended to 67 nodes. @@ -79,11 +72,18 @@ and, if possible, they will preempt running jobs from partitions with lower *Pri * **`asa-general`,`asa-daily`,`asa-ansys`,`asa-visas` and `mu3e`** are **private** partitions, belonging to different experiments owning the machines. **Access is restricted** in all cases. However, by agreement with the experiments, nodes are usually added to the **`hourly`** partition as extra resources for the public resources. !!! tip "Partition Selection" - Jobs which would run for less than one day should be always sent to **daily**, while jobs that would run for less than one hour should be sent to **hourly**. This would ensure that you have highest priority over jobs sent to partitions with less priority, but also because **general** has limited the number of nodes that can be used for that. The idea behind that, is that the cluster can not be blocked by long jobs and we can always ensure resources for shorter jobs. + Jobs which would run for less than one day should be always sent to + **daily**, while jobs that would run for less than one hour should be sent + to **hourly**. This would ensure that you have highest priority over jobs + sent to partitions with less priority, but also because **general** has + limited the number of nodes that can be used for that. The idea behind + that, is that the cluster can not be blocked by long jobs and we can always + ensure resources for shorter jobs. ### Merlin5 CPU Accounts Users need to ensure that the public **`merlin`** account is specified. No specifying account options would default to this account. + This is mostly needed by users which have multiple Slurm accounts, which may define by mistake a different account. ```bash @@ -100,16 +100,14 @@ Not all the accounts can be used on all partitions. This is resumed in the table #### Private accounts -* The *`gfa-asa`* and *`mu3e`* accounts are private accounts. These can be used for accessing dedicated -partitions with nodes owned by different groups. +* The *`gfa-asa`* and *`mu3e`* accounts are private accounts. These can be used for accessing dedicated partitions with nodes owned by different groups. ### Slurm CPU specific options Some options are available when using CPUs. These are detailed here. - -Alternative Slurm options for CPU based jobs are available. Please refer to the **man** pages -for each Slurm command for further information about it (`man salloc`, `man sbatch`, `man srun`). -Below are listed the most common settings: +Alternative Slurm options for CPU based jobs are available. Please refer to the +**man** pages for each Slurm command for further information about it (`man +salloc`, `man sbatch`, `man srun`). Below are listed the most common settings: ```bash #SBATCH --hint=[no]multithread @@ -125,8 +123,9 @@ Below are listed the most common settings: #### Enabling/Disabling Hyper-Threading -The **`merlin6`** cluster contains nodes with Hyper-Threading enabled. One should always specify -whether to use Hyper-Threading or not. If not defined, Slurm will generally use it (exceptions apply). +The **`merlin6`** cluster contains nodes with Hyper-Threading enabled. One +should always specify whether to use Hyper-Threading or not. If not defined, +Slurm will generally use it (exceptions apply). ```bash #SBATCH --hint=multithread # Use extra threads with in-core multi-threading. @@ -138,7 +137,7 @@ whether to use Hyper-Threading or not. If not defined, Slurm will generally use Slurm allows to define a set of features in the node definition. This can be used to filter and select nodes according to one or more specific features. For the CPU nodes, we have the following features: -``` +```text NodeName=merlin-c-[001-024,101-124,201-224] Features=mem_384gb,xeon-gold-6152 NodeName=merlin-c-[301-312] Features=mem_768gb,xeon-gold-6240r NodeName=merlin-c-[313-318] Features=mem_768gb,xeon-gold-6240r @@ -149,26 +148,36 @@ Therefore, users running on `hourly` can select which node they want to use (fat This is possible by using the option `--constraint=` in Slurm. Examples: + 1. Select nodes with 48 cores only (nodes with [2 x Xeon Gold 6240R](https://ark.intel.com/content/www/us/en/ark/products/199343/intel-xeon-gold-6240r-processor-35-75m-cache-2-40-ghz.html)): -``` -sbatch --constraint=xeon-gold-6240r ... -``` -2. Select nodes with 44 cores only (nodes with [2 x Xeon Gold 6152](https://ark.intel.com/content/www/us/en/ark/products/120491/intel-xeon-gold-6152-processor-30-25m-cache-2-10-ghz.html)): -``` -sbatch --constraint=xeon-gold-6152 ... -``` -3. Select fat memory nodes only: -``` -sbatch --constraint=mem_768gb ... -``` -4. Select regular memory nodes only: -``` -sbatch --constraint=mem_384gb ... -``` -5. Select fat memory nodes with 48 cores only: -``` -sbatch --constraint=mem_768gb,xeon-gold-6240r ... -``` + + ```bash + sbatch --constraint=xeon-gold-6240r ... + ``` + +1. Select nodes with 44 cores only (nodes with [2 x Xeon Gold 6152](https://ark.intel.com/content/www/us/en/ark/products/120491/intel-xeon-gold-6152-processor-30-25m-cache-2-10-ghz.html)): + + ```bash + sbatch --constraint=xeon-gold-6152 ... + ``` + +1. Select fat memory nodes only: + + ```bash + sbatch --constraint=mem_768gb ... + ``` + +1. Select regular memory nodes only: + + ```bash + sbatch --constraint=mem_384gb ... + ``` + +1. Select fat memory nodes with 48 cores only: + + ```bash + sbatch --constraint=mem_768gb,xeon-gold-6240r ... + ``` Detailing exactly which type of nodes you want to use is important, therefore, for groups with private accounts (`mu3e`,`gfa-asa`) or for public users running on the `hourly` partition, *constraining nodes by features is recommended*. This becomes even more important when @@ -178,11 +187,11 @@ having heterogeneous clusters. In this chapter we will cover basic settings that users need to specify in order to run jobs in the Merlin6 CPU cluster. -### User and job limits +### User and job limits -In the CPU cluster we provide some limits which basically apply to jobs and users. The idea behind this is to ensure a fair usage of the resources and to +In the CPU cluster we provide some limits which basically apply to jobs and users. The idea behind this is to ensure a fair usage of the resources and to avoid overabuse of the resources from a single user or job. However, applying limits might affect the overall usage efficiency of the cluster (in example, -pending jobs from a single user while having many idle nodes due to low overall activity is something that can be seen when user limits are applied). +pending jobs from a single user while having many idle nodes due to low overall activity is something that can be seen when user limits are applied). In the same way, these limits can be also used to improve the efficiency of the cluster (in example, without any job size limits, a job requesting all resources from the batch system would drain the entire cluster for fitting the job, which is undesirable). @@ -190,14 +199,24 @@ Hence, there is a need of setting up wise limits and to ensure that there is a f of the cluster while allowing jobs of different nature and sizes (it is, **single core** based **vs parallel jobs** of different sizes) to run. !!! warning "Resource Limits" - Wide limits are provided in the **daily** and **hourly** partitions, while for **general** those limits are more restrictive. However, we kindly ask users to inform the Merlin administrators when there are plans to send big jobs which would require a massive draining of nodes for allocating such jobs. This would apply to jobs requiring the **unlimited** QoS (see below "Per job limits"). + Wide limits are provided in the **daily** and **hourly** partitions, while + for **general** those limits are more restrictive. However, we kindly ask + users to inform the Merlin administrators when there are plans to send big + jobs which would require a massive draining of nodes for allocating such + jobs. This would apply to jobs requiring the **unlimited** QoS (see below + "Per job limits"). !!! tip "Custom Requirements" - If you have different requirements, please let us know, we will try to accommodate or propose a solution for you. + If you have different requirements, please let us know, we will try to + accommodate or propose a solution for you. #### Per job limits -These are limits which apply to a single job. In other words, there is a maximum of resources a single job can use. Limits are described in the table below with the format: `SlurmQoS(limits)` (possible `SlurmQoS` values can be listed with the command `sacctmgr show qos`). Some limits will vary depending on the day and time of the week. +These are limits which apply to a single job. In other words, there is a +maximum of resources a single job can use. Limits are described in the table +below with the format: `SlurmQoS(limits)` (possible `SlurmQoS` values can be +listed with the command `sacctmgr show qos`). Some limits will vary depending +on the day and time of the week. | Partition | Mon-Fri 0h-18h | Sun-Thu 18h-0h | From Fri 18h to Mon 0h | |:----------: | :------------------------------: | :------------------------------: | :------------------------------: | @@ -205,18 +224,29 @@ These are limits which apply to a single job. In other words, there is a maximum | **daily** | daytime(cpu=704,mem=2750G) | nighttime(cpu=1408,mem=5500G) | unlimited(cpu=2200,mem=8593.75G) | | **hourly** | unlimited(cpu=2200,mem=8593.75G) | unlimited(cpu=2200,mem=8593.75G) | unlimited(cpu=2200,mem=8593.75G) | -By default, a job can not use more than 704 cores (max CPU per job). In the same way, memory is also proportionally limited. This is equivalent as -running a job using up to 8 nodes at once. This limit applies to the **general** partition (fixed limit) and to the **daily** partition (only during working hours). -Limits are softed for the **daily** partition during non working hours, and during the weekend limits are even wider. +By default, a job can not use more than 704 cores (max CPU per job). In the +same way, memory is also proportionally limited. This is equivalent as running +a job using up to 8 nodes at once. This limit applies to the **general** +partition (fixed limit) and to the **daily** partition (only during working +hours). -For the **hourly** partition, **despite running many parallel jobs is something not desirable** (for allocating such jobs it requires massive draining of nodes), -wider limits are provided. In order to avoid massive nodes drain in the cluster, for allocating huge jobs, setting per job limits is necessary. Hence, **unlimited** QoS -mostly refers to "per user" limits more than to "per job" limits (in other words, users can run any number of hourly jobs, but the job size for such jobs is limited -with wide values). +Limits are softed for the **daily** partition during non working hours, and +during the weekend limits are even wider. For the **hourly** partition, +**despite running many parallel jobs is something not desirable** (for +allocating such jobs it requires massive draining of nodes), wider limits are +provided. In order to avoid massive nodes drain in the cluster, for allocating +huge jobs, setting per job limits is necessary. Hence, **unlimited** QoS mostly +refers to "per user" limits more than to "per job" limits (in other words, +users can run any number of hourly jobs, but the job size for such jobs is +limited with wide values). #### Per user limits for CPU partitions -These limits which apply exclusively to users. In other words, there is a maximum of resources a single user can use. Limits are described in the table below with the format: `SlurmQoS(limits)` (possible `SlurmQoS` values can be listed with the command `sacctmgr show qos`). Some limits will vary depending on the day and time of the week. +These limits which apply exclusively to users. In other words, there is a +maximum of resources a single user can use. Limits are described in the table +below with the format: `SlurmQoS(limits)` (possible `SlurmQoS` values can be +listed with the command `sacctmgr show qos`). Some limits will vary depending +on the day and time of the week. | Partition | Mon-Fri 0h-18h | Sun-Thu 18h-0h | From Fri 18h to Mon 0h | |:-----------:| :----------------------------: | :---------------------------: | :----------------------------: | @@ -224,15 +254,22 @@ These limits which apply exclusively to users. In other words, there is a maximu | **daily** | daytime(cpu=1408,mem=5500G) | nighttime(cpu=2112,mem=8250G) | unlimited(cpu=6336,mem=24750G) | | **hourly** | unlimited(cpu=6336,mem=24750G) | unlimited(cpu=6336,mem=24750G)| unlimited(cpu=6336,mem=24750G) | -By default, users can not use more than 704 cores at the same time (max CPU per user). Memory is also proportionally limited in the same way. This is -equivalent to 8 exclusive nodes. This limit applies to the **general** partition (fixed limit) and to the **daily** partition (only during working hours). -For the **hourly** partition, there are no limits restriction and user limits are removed. Limits are softed for the **daily** partition during non -working hours, and during the weekend limits are removed. +By default, users can not use more than 704 cores at the same time (max CPU per +user). Memory is also proportionally limited in the same way. This is +equivalent to 8 exclusive nodes. This limit applies to the **general** +partition (fixed limit) and to the **daily** partition (only during working +hours). + +For the **hourly** partition, there are no limits restriction and user limits +are removed. Limits are softed for the **daily** partition during non working +hours, and during the weekend limits are removed. ## Advanced Slurm configuration -Clusters at PSI use the [Slurm Workload Manager](http://slurm.schedmd.com/) as the batch system technology for managing and scheduling jobs. -Slurm has been installed in a **multi-clustered** configuration, allowing to integrate multiple clusters in the same batch system. +Clusters at PSI use the [Slurm Workload Manager](http://slurm.schedmd.com/) as +the batch system technology for managing and scheduling jobs. Slurm has been +installed in a **multi-clustered** configuration, allowing to integrate +multiple clusters in the same batch system. For understanding the Slurm configuration setup in the cluster, sometimes may be useful to check the following files: @@ -240,5 +277,10 @@ For understanding the Slurm configuration setup in the cluster, sometimes may be * ``/etc/slurm/gres.conf`` - can be found in the GPU nodes, is also propgated to login nodes and computing nodes for user read access. * ``/etc/slurm/cgroup.conf`` - can be found in the computing nodes, is also propagated to login nodes for user read access. -The previous configuration files which can be found in the login nodes, correspond exclusively to the **merlin6** cluster configuration files. -Configuration files for the old **merlin5** cluster or for the **gmerlin6** cluster must be checked directly on any of the **merlin5** or **gmerlin6** computing nodes (in example, by login in to one of the nodes while a job or an active allocation is running). +The previous configuration files which can be found in the login nodes, +correspond exclusively to the **merlin6** cluster configuration files. + +Configuration files for the old **merlin5** cluster or for the **gmerlin6** +cluster must be checked directly on any of the **merlin5** or **gmerlin6** +computing nodes (in example, by login in to one of the nodes while a job or an +active allocation is running). diff --git a/docs/merlin6/slurm-general-docs/interactive-jobs.md b/docs/merlin6/slurm-general-docs/interactive-jobs.md index 6c77a9f..788edab 100644 --- a/docs/merlin6/slurm-general-docs/interactive-jobs.md +++ b/docs/merlin6/slurm-general-docs/interactive-jobs.md @@ -57,7 +57,7 @@ a shell (`$SHELL`) at the end of the `salloc` command. In example: ```bash # Typical 'salloc' call # - Same as running: -# 'salloc --clusters=merlin6 -N 2 -n 2 srun -n1 -N1 --mem-per-cpu=0 --gres=gpu:0 --pty --preserve-env --mpi=none $SHELL' +# 'salloc --clusters=merlin6 -N 2 -n 2 srun -n1 -N1 --mem-per-cpu=0 --gres=gpu:0 --pty --preserve-env --mpi=none $SHELL' salloc --clusters=merlin6 -N 2 -n 2 # Custom 'salloc' call @@ -155,7 +155,7 @@ srun --clusters=merlin6 --x11 --pty bash srun: job 135095591 queued and waiting for resources srun: job 135095591 has been allocated resources - (base) [caubet_m@merlin-l-001 ~]$ + (base) [caubet_m@merlin-l-001 ~]$ (base) [caubet_m@merlin-l-001 ~]$ srun --clusters=merlin6 --x11 --pty bash srun: job 135095592 queued and waiting for resources @@ -198,7 +198,7 @@ salloc --clusters=merlin6 --x11 salloc: Granted job allocation 135171355 salloc: Relinquishing job allocation 135171355 - (base) [caubet_m@merlin-l-001 ~]$ salloc --clusters=merlin6 --x11 + (base) [caubet_m@merlin-l-001 ~]$ salloc --clusters=merlin6 --x11 salloc: Pending job allocation 135171349 salloc: job 135171349 queued and waiting for resources salloc: job 135171349 has been allocated resources diff --git a/docs/merlin6/slurm-general-docs/monitoring.md b/docs/merlin6/slurm-general-docs/monitoring.md index 97f3b5e..7996ccf 100644 --- a/docs/merlin6/slurm-general-docs/monitoring.md +++ b/docs/merlin6/slurm-general-docs/monitoring.md @@ -166,20 +166,20 @@ sjstat Scheduling pool data: ---------------------------------------------------------------------------------- - Total Usable Free Node Time Other - Pool Memory Cpus Nodes Nodes Nodes Limit Limit traits + Total Usable Free Node Time Other + Pool Memory Cpus Nodes Nodes Nodes Limit Limit traits ---------------------------------------------------------------------------------- - test 373502Mb 88 6 6 1 UNLIM 1-00:00:00 - general* 373502Mb 88 66 66 8 50 7-00:00:00 - daily 373502Mb 88 72 72 9 60 1-00:00:00 - hourly 373502Mb 88 72 72 9 UNLIM 01:00:00 - gpu 128000Mb 8 1 1 0 UNLIM 7-00:00:00 - gpu 128000Mb 20 8 8 0 UNLIM 7-00:00:00 + test 373502Mb 88 6 6 1 UNLIM 1-00:00:00 + general* 373502Mb 88 66 66 8 50 7-00:00:00 + daily 373502Mb 88 72 72 9 60 1-00:00:00 + hourly 373502Mb 88 72 72 9 UNLIM 01:00:00 + gpu 128000Mb 8 1 1 0 UNLIM 7-00:00:00 + gpu 128000Mb 20 8 8 0 UNLIM 7-00:00:00 Running job data: --------------------------------------------------------------------------------------------------- - Time Time Time - JobID User Procs Pool Status Used Limit Started Master/Other + Time Time Time + JobID User Procs Pool Status Used Limit Started Master/Other --------------------------------------------------------------------------------------------------- 13433377 collu_g 1 gpu PD 0:00 24:00:00 N/A (Resources) 13433389 collu_g 20 gpu PD 0:00 24:00:00 N/A (Resources) @@ -249,11 +249,10 @@ sview !['sview' graphical user interface](../../images/slurm/sview.png) - ## General Monitoring -The following pages contain basic monitoring for Slurm and computing nodes. -Currently, monitoring is based on Grafana + InfluxDB. In the future it will +The following pages contain basic monitoring for Slurm and computing nodes. +Currently, monitoring is based on Grafana + InfluxDB. In the future it will be moved to a different service based on ElasticSearch + LogStash + Kibana. In the meantime, the following monitoring pages are available in a best effort @@ -262,17 +261,17 @@ support: ### Merlin6 Monitoring Pages * Slurm monitoring: - * ***[Merlin6 Slurm Statistics - XDMOD](https://merlin-slurmmon01.psi.ch/)*** - * [Merlin6 Slurm Live Status](https://hpc-monitor02.psi.ch/d/QNcbW1AZk/merlin6-slurm-live-status?orgId=1&refresh=10s) - * [Merlin6 Slurm Overview](https://hpc-monitor02.psi.ch/d/94UxWJ0Zz/merlin6-slurm-overview?orgId=1&refresh=10s) + * ***[Merlin6 Slurm Statistics - XDMOD](https://merlin-slurmmon01.psi.ch/)*** + * [Merlin6 Slurm Live Status](https://hpc-monitor02.psi.ch/d/QNcbW1AZk/merlin6-slurm-live-status?orgId=1&refresh=10s) + * [Merlin6 Slurm Overview](https://hpc-monitor02.psi.ch/d/94UxWJ0Zz/merlin6-slurm-overview?orgId=1&refresh=10s) * Nodes monitoring: - * [Merlin6 CPU Nodes Overview](https://hpc-monitor02.psi.ch/d/JmvLR8gZz/merlin6-computing-cpu-nodes?orgId=1&refresh=10s) - * [Merlin6 GPU Nodes Overview](https://hpc-monitor02.psi.ch/d/gOo1Z10Wk/merlin6-computing-gpu-nodes?orgId=1&refresh=10s) + * [Merlin6 CPU Nodes Overview](https://hpc-monitor02.psi.ch/d/JmvLR8gZz/merlin6-computing-cpu-nodes?orgId=1&refresh=10s) + * [Merlin6 GPU Nodes Overview](https://hpc-monitor02.psi.ch/d/gOo1Z10Wk/merlin6-computing-gpu-nodes?orgId=1&refresh=10s) ### Merlin5 Monitoring Pages * Slurm monitoring: - * [Merlin5 Slurm Live Status](https://hpc-monitor02.psi.ch/d/o8msZJ0Zz/merlin5-slurm-live-status?orgId=1&refresh=10s) - * [Merlin5 Slurm Overview](https://hpc-monitor02.psi.ch/d/eWLEW1AWz/merlin5-slurm-overview?orgId=1&refresh=10s) + * [Merlin5 Slurm Live Status](https://hpc-monitor02.psi.ch/d/o8msZJ0Zz/merlin5-slurm-live-status?orgId=1&refresh=10s) + * [Merlin5 Slurm Overview](https://hpc-monitor02.psi.ch/d/eWLEW1AWz/merlin5-slurm-overview?orgId=1&refresh=10s) * Nodes monitoring: - * [Merlin5 CPU Nodes Overview](https://hpc-monitor02.psi.ch/d/ejTyWJAWk/merlin5-computing-cpu-nodes?orgId=1&refresh=10s) + * [Merlin5 CPU Nodes Overview](https://hpc-monitor02.psi.ch/d/ejTyWJAWk/merlin5-computing-cpu-nodes?orgId=1&refresh=10s) diff --git a/docs/merlin6/slurm-general-docs/running-jobs.md b/docs/merlin6/slurm-general-docs/running-jobs.md index 23e2228..162e1f7 100644 --- a/docs/merlin6/slurm-general-docs/running-jobs.md +++ b/docs/merlin6/slurm-general-docs/running-jobs.md @@ -5,19 +5,19 @@ Before starting using the cluster, please read the following rules: 1. To ease and improve *scheduling* and *backfilling*, always try to **estimate and** to **define a proper run time** of your jobs: - * Use `--time=` for that. - * For very long runs, please consider using ***[Job Arrays with Checkpointing](#array-jobs-running-very-long-tasks-with-checkpoint-files)*** + * Use `--time=` for that. + * For very long runs, please consider using ***[Job Arrays with Checkpointing](#array-jobs-running-very-long-tasks-with-checkpoint-files)*** 2. Try to optimize your jobs for running at most within **one day**. Please, consider the following: - * Some software can simply scale up by using more nodes while drastically reducing the run time. - * Some software allow to save a specific state, and a second job can start from that state: ***[Job Arrays with Checkpointing](#array-jobs-running-very-long-tasks-with-checkpoint-files)*** can help you with that. - * Jobs submitted to **`hourly`** get more priority than jobs submitted to **`daily`**: always use **`hourly`** for jobs shorter than 1 hour. - * Jobs submitted to **`daily`** get more priority than jobs submitted to **`general`**: always use **`daily`** for jobs shorter than 1 day. + * Some software can simply scale up by using more nodes while drastically reducing the run time. + * Some software allow to save a specific state, and a second job can start from that state: ***[Job Arrays with Checkpointing](#array-jobs-running-very-long-tasks-with-checkpoint-files)*** can help you with that. + * Jobs submitted to **`hourly`** get more priority than jobs submitted to **`daily`**: always use **`hourly`** for jobs shorter than 1 hour. + * Jobs submitted to **`daily`** get more priority than jobs submitted to **`general`**: always use **`daily`** for jobs shorter than 1 day. 3. Is **forbidden** to run **very short jobs** as they cause a lot of overhead but also can cause severe problems to the main scheduler. - * ***Question:*** Is my job a very short job? ***Answer:*** If it lasts in few seconds or very few minutes, yes. - * ***Question:*** How long should my job run? ***Answer:*** as the *Rule of Thumb*, from 5' would start being ok, from 15' would preferred. - * Use ***[Packed Jobs](#packed-jobs-running-a-large-number-of-short-tasks)*** for running a large number of short tasks. + * ***Question:*** Is my job a very short job? ***Answer:*** If it lasts in few seconds or very few minutes, yes. + * ***Question:*** How long should my job run? ***Answer:*** as the *Rule of Thumb*, from 5' would start being ok, from 15' would preferred. + * Use ***[Packed Jobs](#packed-jobs-running-a-large-number-of-short-tasks)*** for running a large number of short tasks. 4. Do not submit hundreds of similar jobs! - * Use ***[Array Jobs](#array-jobs-launching-a-large-number-of-related-jobs)*** for gathering jobs instead. + * Use ***[Array Jobs](#array-jobs-launching-a-large-number-of-related-jobs)*** for gathering jobs instead. !!! tip Having a good estimation of the *time* needed by your jobs, a proper way for @@ -37,6 +37,7 @@ Before starting using the cluster, please read the following rules: ## Basic settings For a complete list of options and parameters available is recommended to use the **man pages** (i.e. `man sbatch`, `man srun`, `man salloc`). + Please, notice that behaviour for some parameters might change depending on the command used when running jobs (in example, `--exclusive` behaviour in `sbatch` differs from `srun`). In this chapter we show the basic parameters which are usually needed in the Merlin cluster. @@ -115,20 +116,20 @@ The following template should be used by any user submitting jobs to the Merlin6 ```bash #!/bin/bash -#SBATCH --cluster=merlin6 # Cluster name +#SBATCH --cluster=merlin6 # Cluster name #SBATCH --partition=general,daily,hourly # Specify one or multiple partitions -#SBATCH --time= # Strongly recommended -#SBATCH --output= # Generate custom output file -#SBATCH --error= # Generate custom error file -#SBATCH --hint=nomultithread # Mandatory for multithreaded jobs -##SBATCH --exclusive # Uncomment if you need exclusive node usage -##SBATCH --ntasks-per-core=1 # Only mandatory for multithreaded single tasks - -## Advanced options example -##SBATCH --nodes=1 # Uncomment and specify #nodes to use -##SBATCH --ntasks=44 # Uncomment and specify #nodes to use -##SBATCH --ntasks-per-node=44 # Uncomment and specify #tasks per node -##SBATCH --cpus-per-task=44 # Uncomment and specify the number of cores per task +#SBATCH --time= # Strongly recommended +#SBATCH --output= # Generate custom output file +#SBATCH --error= # Generate custom error file +#SBATCH --hint=nomultithread # Mandatory for multithreaded jobs +##SBATCH --exclusive # Uncomment if you need exclusive node usage +##SBATCH --ntasks-per-core=1 # Only mandatory for multithreaded single tasks + +## Advanced options example +##SBATCH --nodes=1 # Uncomment and specify #nodes to use +##SBATCH --ntasks=44 # Uncomment and specify #nodes to use +##SBATCH --ntasks-per-node=44 # Uncomment and specify #tasks per node +##SBATCH --cpus-per-task=44 # Uncomment and specify the number of cores per task ``` #### Multithreaded jobs template @@ -241,7 +242,7 @@ strategy: #SBATCH --time=7-00:00:00 # each job can run for 7 days #SBATCH --cpus-per-task=1 #SBATCH --array=1-10%1 # Run a 10-job array, one job at a time. -if test -e checkpointfile; then +if test -e checkpointfile; then # There is a checkpoint file; myprogram --read-checkp checkpointfile else diff --git a/docs/merlin6/slurm-general-docs/slurm-basic-commands.md b/docs/merlin6/slurm-general-docs/slurm-basic-commands.md index 01bc66a..972a6ef 100644 --- a/docs/merlin6/slurm-general-docs/slurm-basic-commands.md +++ b/docs/merlin6/slurm-general-docs/slurm-basic-commands.md @@ -9,9 +9,9 @@ information about options and examples. Useful commands for the slurm: ```bash -sinfo # to see the name of nodes, their occupancy, +sinfo # to see the name of nodes, their occupancy, # name of slurm partitions, limits (try out with "-l" option) -squeue # to see the currently running/waiting jobs in slurm +squeue # to see the currently running/waiting jobs in slurm # (additional "-l" option may also be useful) sbatch Script.sh # to submit a script (example below) to the slurm. srun # to submit a command to Slurm. Same options as in 'sbatch' can be used. @@ -30,7 +30,7 @@ sacct # Show job accounting, useful for checking details of finished ```bash sinfo -N -l # list nodes, state, resources (#CPUs, memory per node, ...), etc. sshare -a # to list shares of associations to a cluster -sprio -l # to view the factors that comprise a job's scheduling priority +sprio -l # to view the factors that comprise a job's scheduling priority # add '-u ' for filtering user ``` diff --git a/docs/merlin6/slurm-general-docs/slurm-examples.md b/docs/merlin6/slurm-general-docs/slurm-examples.md index c879c96..c028b2d 100644 --- a/docs/merlin6/slurm-general-docs/slurm-examples.md +++ b/docs/merlin6/slurm-general-docs/slurm-examples.md @@ -251,7 +251,6 @@ The `%1` in the `#SBATCH --array=1-10%1` statement defines that only 1 subjob ca this will result in subjob n+1 only being started when job n has finished. It will read the checkpoint file if it is present. - ### Packed jobs: running a large number of short tasks Since the launching of a Slurm job incurs some overhead, you should not submit each short task as a separate diff --git a/docs/merlin6/software-support/ansys-cfx.md b/docs/merlin6/software-support/ansys-cfx.md index 86079ff..00b7a95 100644 --- a/docs/merlin6/software-support/ansys-cfx.md +++ b/docs/merlin6/software-support/ansys-cfx.md @@ -54,7 +54,7 @@ export ANSYSLI_SERVERS=2325@$LICENSE_SERVER # [Optional:END] SOLVER_FILE=/data/user/caubet_m/CFX5/mysolver.in -cfx5solve -batch -def "$JOURNAL_FILE" +cfx5solve -batch -def "$JOURNAL_FILE" ``` One can enable hypertheading by defining `--hint=multithread`, @@ -99,23 +99,24 @@ if [ "$INTELMPI" == "yes" ] then export I_MPI_DEBUG=4 export I_MPI_PIN_CELL=core - - # Simple example: cfx5solve -batch -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ - # -part $SLURM_NTASKS \ + + # Simple example: cfx5solve -batch -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ + # -part $SLURM_NTASKS \ # -start-method 'Intel MPI Distributed Parallel' - cfx5solve -batch -part-large -double -verbose -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ + cfx5solve -batch -part-large -double -verbose -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ -part $SLURM_NTASKS -par-local -start-method 'Intel MPI Distributed Parallel' else - # Simple example: cfx5solve -batch -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ - # -part $SLURM_NTASKS \ + # Simple example: cfx5solve -batch -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ + # -part $SLURM_NTASKS \ # -start-method 'IBM MPI Distributed Parallel' - cfx5solve -batch -part-large -double -verbose -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ + cfx5solve -batch -part-large -double -verbose -def "$JOURNAL_FILE" -par-dist "$HOSTLIST" \ -part $SLURM_NTASKS -par-local -start-method 'IBM MPI Distributed Parallel' fi ``` In the above example, one can increase the number of *nodes* and/or *ntasks* if needed and combine it with `--exclusive` whenever needed. In general, **no hypertheading** is recommended for MPI based jobs. + Also, one can combine it with `--exclusive` when necessary. Finally, one can change the MPI technology in `-start-method` (check CFX documentation for possible values). diff --git a/docs/merlin6/software-support/ansys-hfss.md b/docs/merlin6/software-support/ansys-hfss.md index fdd338b..9126162 100644 --- a/docs/merlin6/software-support/ansys-hfss.md +++ b/docs/merlin6/software-support/ansys-hfss.md @@ -75,10 +75,10 @@ To setup HFSS RSM for using it with the Merlin cluster, it must be done from the ![RSM_Remote_Scheduler](../../images/ANSYS/HFSS/02_Select_Scheduler_RSM_Remote.png) - * **Select Scheduler**: `Remote RSM`. - * **Server**: Add a Merlin login node. - * **User name**: Add your Merlin username. - * **Password**: Add you Merlin username password. + * **Select Scheduler**: `Remote RSM`. + * **Server**: Add a Merlin login node. + * **User name**: Add your Merlin username. + * **Password**: Add you Merlin username password. Once *refreshed*, the **Scheduler info** box must provide **Slurm** information of the server (see above picture). If the box contains that @@ -92,7 +92,7 @@ To setup HFSS RSM for using it with the Merlin cluster, it must be done from the ![Product_Path](../../images/ANSYS/HFSS/05_Submit_Job_Product_Path.png) - * In example, for **ANSYS/2022R1**, the location is `/data/software/pmodules/Tools/ANSYS/2021R1/v211/AnsysEM21.1/Linux64/ansysedt.exe`. + * In example, for **ANSYS/2022R1**, the location is `/data/software/pmodules/Tools/ANSYS/2021R1/v211/AnsysEM21.1/Linux64/ansysedt.exe`. ### HFSS Slurm (from login node only) @@ -118,10 +118,10 @@ Desktop** to submit to Slurm. This can set as follows: ![RSM_Remote_Scheduler](../../images/ANSYS/HFSS/03_Select_Scheduler_Slurm.png) - * **Select Scheduler**: `Slurm`. - * **Server**: must point to `localhost`. - * **User name**: must be empty. - * **Password**: must be empty. + * **Select Scheduler**: `Slurm`. + * **Server**: must point to `localhost`. + * **User name**: must be empty. + * **Password**: must be empty. The **Server, User name** and **Password** boxes can't be modified, but if value do not match with the above settings, they should be changed by diff --git a/docs/merlin6/software-support/ansys-mapdl.md b/docs/merlin6/software-support/ansys-mapdl.md index af6729a..caa7b21 100644 --- a/docs/merlin6/software-support/ansys-mapdl.md +++ b/docs/merlin6/software-support/ansys-mapdl.md @@ -1,6 +1,4 @@ ---- -title: ANSYS - MAPDL ---- +# ANSYS - MAPDL # ANSYS - Mechanical APDL @@ -143,12 +141,12 @@ then # When using -mpi=intelmpi, KMP Affinity must be disabled export KMP_AFFINITY=disabled - # INTELMPI is not aware about distribution of tasks. + # INTELMPI is not aware about distribution of tasks. # - We need to define tasks distribution. HOSTLIST=$(srun hostname | sort | uniq -c | awk '{print $2 ":" $1}' | tr '\n' ':' | sed 's/:$/\n/g') mapdl -b -dis -mpi intelmpi -machines $HOSTLIST -np ${SLURM_NTASKS} -i "$SOLVER_FILE" else - # IBMMPI (default) will be aware of the distribution of tasks. + # IBMMPI (default) will be aware of the distribution of tasks. # - In principle, no need to force tasks distribution mapdl -b -dis -mpi ibmmpi -np ${SLURM_NTASKS} -i "$SOLVER_FILE" fi diff --git a/docs/merlin6/software-support/ansys-rsm.md b/docs/merlin6/software-support/ansys-rsm.md index 7b5b8ba..ab37d88 100644 --- a/docs/merlin6/software-support/ansys-rsm.md +++ b/docs/merlin6/software-support/ansys-rsm.md @@ -56,25 +56,25 @@ The different steps and settings required to make it work are that following: 2. Right-click the **HPC Resources** icon followed by **Add HPC Resource...** ![Adding a new HPC Resource](../../images/ANSYS/rsm-1-add_hpc_resource.png) 3. In the **HPC Resource** tab, fill up the corresponding fields as follows: -![HPC Resource](../../images/ANSYS/rsm-2-add_cluster.png) - * **"Name"**: Add here the preffered name for the cluster. In example: `Merlin6 cluster - merlin-l-001` - * **"HPC Type"**: Select `SLURM` - * **"Submit host"**: Add one of the login nodes. In example `merlin-l-001`. - * **"Slurm Job submission arguments (optional)"**: Add any required Slurm options for running your jobs. +![HPC Resource](../../images/ANSYS/rsm-2-add_cluster.png) + * **"Name"**: Add here the preffered name for the cluster. In example: `Merlin6 cluster - merlin-l-001` + * **"HPC Type"**: Select `SLURM` + * **"Submit host"**: Add one of the login nodes. In example `merlin-l-001`. + * **"Slurm Job submission arguments (optional)"**: Add any required Slurm options for running your jobs. * In general, `--hint=nomultithread` should be at least present. - * Check **"Use SSH protocol for inter and intra-node communication (Linux only)"** - * Select **"Able to directly submit and monitor HPC jobs"**. - * **"Apply"** changes. + * Check **"Use SSH protocol for inter and intra-node communication (Linux only)"** + * Select **"Able to directly submit and monitor HPC jobs"**. + * **"Apply"** changes. 4. In the **"File Management"** tab, fill up the corresponding fields as follows: -![File Management](../../images/ANSYS/rsm-3-add_scratch_info.png) - * Select **"RSM internal file transfer mechanism"** and add **`/shared-scratch`** as the **"Staging directory path on Cluster"** - * Select **"Scratch directory local to the execution node(s)"** and add **`/scratch`** as the **HPC scratch directory**. - * **Never check** the option "Keep job files in the staging directory when job is complete" if the previous +![File Management](../../images/ANSYS/rsm-3-add_scratch_info.png) + * Select **"RSM internal file transfer mechanism"** and add **`/shared-scratch`** as the **"Staging directory path on Cluster"** + * Select **"Scratch directory local to the execution node(s)"** and add **`/scratch`** as the **HPC scratch directory**. + * **Never check** the option "Keep job files in the staging directory when job is complete" if the previous option "Scratch directory local to the execution node(s)" was set. - * **"Apply"** changes. + * **"Apply"** changes. 5. In the **"Queues"** tab, use the left button to auto-discover partitions ![Queues](../../images/ANSYS/rsm-4-get_slurm_queues.png) - * If no authentication method was configured before, an authentication window will appear. Use your + * If no authentication method was configured before, an authentication window will appear. Use your PSI account to authenticate. Notice that the **`PSICH\`** prefix **must not be added**. ![Authenticating](../../images/ANSYS/rsm-5-authenticating.png) * From the partition list, select the ones you want to typically use. diff --git a/docs/merlin6/software-support/ansys.md b/docs/merlin6/software-support/ansys.md index 1b48a71..590eda0 100644 --- a/docs/merlin6/software-support/ansys.md +++ b/docs/merlin6/software-support/ansys.md @@ -40,17 +40,17 @@ option. This will show the location of the different ANSYS releases as follows: Module Rel.stage Group Dependencies/Modulefile ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- - ANSYS/2019R3 stable Tools dependencies: + ANSYS/2019R3 stable Tools dependencies: modulefile: /data/software/pmodules/Tools/modulefiles/ANSYS/2019R3 - ANSYS/2020R1 stable Tools dependencies: + ANSYS/2020R1 stable Tools dependencies: modulefile: /opt/psi/Tools/modulefiles/ANSYS/2020R1 - ANSYS/2020R1-1 stable Tools dependencies: + ANSYS/2020R1-1 stable Tools dependencies: modulefile: /opt/psi/Tools/modulefiles/ANSYS/2020R1-1 - ANSYS/2020R2 stable Tools dependencies: + ANSYS/2020R2 stable Tools dependencies: modulefile: /data/software/pmodules/Tools/modulefiles/ANSYS/2020R2 - ANSYS/2021R1 stable Tools dependencies: + ANSYS/2021R1 stable Tools dependencies: modulefile: /data/software/pmodules/Tools/modulefiles/ANSYS/2021R1 - ANSYS/2021R2 stable Tools dependencies: + ANSYS/2021R2 stable Tools dependencies: modulefile: /data/software/pmodules/Tools/modulefiles/ANSYS/2021R2 ``` @@ -62,6 +62,7 @@ option. This will show the location of the different ANSYS releases as follows: ### ANSYS RSM **ANSYS Remote Solve Manager (RSM)** is used by ANSYS Workbench to submit computational jobs to HPC clusters directly from Workbench on your desktop. + Therefore, PSI workstations with direct access to Merlin can submit jobs by using RSM. For further information, please visit the **[ANSYS RSM](ansys-rsm.md)** section. diff --git a/docs/merlin6/software-support/gothic.md b/docs/merlin6/software-support/gothic.md index 37d4f55..a06e1e4 100644 --- a/docs/merlin6/software-support/gothic.md +++ b/docs/merlin6/software-support/gothic.md @@ -78,7 +78,7 @@ To submit an interactive job, consider the following requirements: # Example 1: Define GTHTMP before the allocation export GTHTMP=/scratch salloc ... - + # Example 2: Define GTHTMP after the allocation salloc ... export GTHTMP=/scratch @@ -89,7 +89,7 @@ To submit an interactive job, consider the following requirements: allocation! In example: ```bash - # Example 1: + # Example 1: export GTHTMP=/scratch/$USER salloc ... mkdir -p $GTHTMP @@ -125,7 +125,7 @@ the [General requirements](#general-requirements) section. * Requesting a full node: ```bash -salloc --partition=hourly -N 1 -n 1 -c 88 --hint=multithread --x11 --exclusive --mem=0 +salloc --partition=hourly -N 1 -n 1 -c 88 --hint=multithread --x11 --exclusive --mem=0 ``` * Requesting 22 CPUs from a node, with default memory per CPU (4000MB/CPU): @@ -177,16 +177,16 @@ requirements](#general-requirements) section, and: #SBATCH --exclusive #SBATCH --mem=0 #SBATCH --clusters=merlin6 - + INPUT_FILE='MY_INPUT.SIN' - + mkdir -p /scratch/$USER/$SLURM_JOB_ID export GTHTMP=/scratch/$USER/$SLURM_JOB_ID - + /data/project/general/software/gothic/gothic8.3qa/bin/gothic_s.sh $INPUT_FILE -m -np $SLURM_CPUS_PER_TASK gth_exit_code=$? - # Clean up data in /scratch + # Clean up data in /scratch rm -rf /scratch/$USER/$SLURM_JOB_ID # Return exit code from GOTHIC @@ -205,16 +205,16 @@ requirements](#general-requirements) section, and: #SBATCH --cpus-per-task=22 #SBATCH --hint=multithread #SBATCH --clusters=merlin6 - + INPUT_FILE='MY_INPUT.SIN' - + mkdir -p /scratch/$USER/$SLURM_JOB_ID export GTHTMP=/scratch/$USER/$SLURM_JOB_ID - + /data/project/general/software/gothic/gothic8.3qa/bin/gothic_s.sh $INPUT_FILE -m -np $SLURM_CPUS_PER_TASK gth_exit_code=$? - # Clean up data in /scratch + # Clean up data in /scratch rm -rf /scratch/$USER/$SLURM_JOB_ID # Return exit code from GOTHIC diff --git a/docs/merlin7/01-Quick-Start-Guide/accessing-interactive-nodes.md b/docs/merlin7/01-Quick-Start-Guide/accessing-interactive-nodes.md index abce551..aa4d188 100644 --- a/docs/merlin7/01-Quick-Start-Guide/accessing-interactive-nodes.md +++ b/docs/merlin7/01-Quick-Start-Guide/accessing-interactive-nodes.md @@ -2,15 +2,15 @@ ## SSH Access -For interactive command shell access, use an SSH client. We recommend to activate SSH's X11 forwarding to allow you to use graphical -applications (e.g. a text editor, but for more performant graphical access, refer to the sections below). X applications are supported +For interactive command shell access, use an SSH client. We recommend to activate SSH's X11 forwarding to allow you to use graphical +applications (e.g. a text editor, but for more performant graphical access, refer to the sections below). X applications are supported in the login nodes and X11 forwarding can be used for those users who have properly configured X11 support in their desktops, however: * Merlin7 administrators **do not offer support** for user desktop configuration (Windows, MacOS, Linux). - * Hence, Merlin7 administrators **do not offer official support** for X11 client setup. - * Nevertheless, a generic guide for X11 client setup (*Linux*, *Windows* and *MacOS*) is provided below. + * Hence, Merlin7 administrators **do not offer official support** for X11 client setup. + * Nevertheless, a generic guide for X11 client setup (*Linux*, *Windows* and *MacOS*) is provided below. * PSI desktop configuration issues must be addressed through **[PSI Service Now](https://psi.service-now.com/psisp)** as an *Incident Request*. - * Ticket will be redirected to the corresponding Desktop support group (Windows, Linux). + * Ticket will be redirected to the corresponding Desktop support group (Windows, Linux). ### Accessing from a Linux client @@ -26,7 +26,8 @@ Refer to [{How To Use Merlin -> Accessing from MacOS Clients}](../02-How-To-Use- ## NoMachine Remote Desktop Access -X applications are supported in the login nodes and can run efficiently through a **NoMachine** client. This is the officially supported way to run more demanding X applications on Merlin7. +X applications are supported in the login nodes and can run efficiently through a **NoMachine** client. This is the officially supported way to run more demanding X applications on Merlin7. + * For PSI Windows workstations, this can be installed from the Software Kiosk as 'NX Client'. If you have difficulties installing, please request support through **[PSI Service Now](https://psi.service-now.com/psisp)** as an *Incident Request*. * For other workstations The client software can be downloaded from the [Nomachine Website](https://www.nomachine.com/product&p=NoMachine%20Enterprise%20Client). diff --git a/docs/merlin7/01-Quick-Start-Guide/accessing-slurm.md b/docs/merlin7/01-Quick-Start-Guide/accessing-slurm.md index 42937ab..da31551 100644 --- a/docs/merlin7/01-Quick-Start-Guide/accessing-slurm.md +++ b/docs/merlin7/01-Quick-Start-Guide/accessing-slurm.md @@ -1,12 +1,4 @@ ---- -title: Accessing Slurm Cluster -#tags: -keywords: slurm, batch system, merlin5, merlin7, gmerlin7, cpu, gpu -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin7_sidebar -permalink: /merlin7/slurm-access.html ---- +# Accessing Slurm Cluster ## The Merlin Slurm clusters @@ -28,7 +20,7 @@ In addition, any job *must be submitted from a high performance storage area vis ### Merlin7 CPU cluster access -The **Merlin7 CPU cluster** (**`merlin7`**) is the default cluster configured in the login nodes. Any job submission will use by default this cluster, unless +The **Merlin7 CPU cluster** (**`merlin7`**) is the default cluster configured in the login nodes. Any job submission will use by default this cluster, unless the option `--cluster` is specified with another of the existing clusters. For further information about how to use this cluster, please visit: [**Merlin7 CPU Slurm Cluster documentation**](../03-Slurm-General-Documentation/slurm-configuration.md#cpu-cluster-merlin7). diff --git a/docs/merlin7/01-Quick-Start-Guide/code-of-conduct.md b/docs/merlin7/01-Quick-Start-Guide/code-of-conduct.md index 6c7ed29..279dd93 100644 --- a/docs/merlin7/01-Quick-Start-Guide/code-of-conduct.md +++ b/docs/merlin7/01-Quick-Start-Guide/code-of-conduct.md @@ -1,12 +1,4 @@ ---- -title: Code Of Conduct -#tags: -keywords: code of conduct, rules, principle, policy, policies, administrator, backup -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin7_sidebar -permalink: /merlin7/code-of-conduct.html ---- +# Code Of Conduct ## The Basic principle @@ -18,10 +10,10 @@ The basic principle is courtesy and consideration for other users. ## Interactive nodes * The interactive nodes (also known as login nodes) are for development and quick testing: - * It is **strictly forbidden to run production jobs** on the login nodes. All production jobs must be submitted to the batch system. - * It is **forbidden to run long processes** occupying big parts of a login node's resources. - * According to the previous rules, **misbehaving running processes will have to be killed.** - in order to keep the system responsive for other users. + * It is **strictly forbidden to run production jobs** on the login nodes. All production jobs must be submitted to the batch system. + * It is **forbidden to run long processes** occupying big parts of a login node's resources. + * According to the previous rules, **misbehaving running processes will have to be killed.** + in order to keep the system responsive for other users. ## Batch system @@ -35,7 +27,7 @@ The basic principle is courtesy and consideration for other users. ## User and project data * ***Users are responsible for backing up their own data***. Is recommended to backup the data on third party independent systems (i.e. LTS, Archive, AFS, SwitchDrive, Windows Shares, etc.). -* ***When a user leaves PSI, she or her supervisor/team are responsible to backup and move the data out from the cluster***: every few months, the storage space will be recycled for those old users who do not have an existing and valid PSI account. +* ***When a user leaves PSI, she or her supervisor/team are responsible to backup and move the data out from the cluster***: every few months, the storage space will be recycled for those old users who do not have an existing and valid PSI account. !!! warning When a user leaves PSI and his account has been removed, her storage space @@ -46,8 +38,8 @@ The basic principle is courtesy and consideration for other users. ## System Administrator Rights * The system administrator has the right to temporarily block the access to Merlin7 for an account violating the Code of Conduct in order to maintain the efficiency and stability of the system. - * Repetitive violations by the same user will be escalated to the user's supervisor. + * Repetitive violations by the same user will be escalated to the user's supervisor. * The system administrator has the right to delete files in the **scratch** directories - * after a job, if the job failed to clean up its files. - * during the job in order to prevent a job from destabilizing a node or multiple nodes. + * after a job, if the job failed to clean up its files. + * during the job in order to prevent a job from destabilizing a node or multiple nodes. * The system administrator has the right to kill any misbehaving running processes. diff --git a/docs/merlin7/01-Quick-Start-Guide/introduction.md b/docs/merlin7/01-Quick-Start-Guide/introduction.md index 5962ddf..7f9d191 100644 --- a/docs/merlin7/01-Quick-Start-Guide/introduction.md +++ b/docs/merlin7/01-Quick-Start-Guide/introduction.md @@ -1,14 +1,4 @@ ---- -title: Introduction -#tags: -keywords: introduction, home, welcome, architecture, design -last_updated: 07 September 2022 -sidebar: merlin7_sidebar -permalink: /merlin7/introduction.html -redirect_from: - - /merlin7 - - /merlin7/index.html ---- +# Introduction ## About Merlin7 @@ -56,9 +46,9 @@ The appliance is built of several storage servers: With effective storage capacity of: * 10 PB HDD - * value visible on linux: HDD 9302.4 TiB + * value visible on linux: HDD 9302.4 TiB * 162 TB SSD - * value visible on linux: SSD 151.6 TiB + * value visible on linux: SSD 151.6 TiB * 23.6 TiB on Metadata The storage is directly connected to the cluster (and each individual node) through the Slingshot NIC. diff --git a/docs/merlin7/01-Quick-Start-Guide/requesting-accounts.md b/docs/merlin7/01-Quick-Start-Guide/requesting-accounts.md index 31223a4..5aea007 100644 --- a/docs/merlin7/01-Quick-Start-Guide/requesting-accounts.md +++ b/docs/merlin7/01-Quick-Start-Guide/requesting-accounts.md @@ -1,12 +1,4 @@ ---- -title: Requesting Merlin Accounts -#tags: -keywords: registration, register, account, merlin5, merlin7, snow, service now -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin7_sidebar -permalink: /merlin7/request-account.html ---- +# Requesting Merlin Accounts ## Requesting Access to Merlin7 diff --git a/docs/merlin7/01-Quick-Start-Guide/requesting-projects.md b/docs/merlin7/01-Quick-Start-Guide/requesting-projects.md index 33ff372..644e278 100644 --- a/docs/merlin7/01-Quick-Start-Guide/requesting-projects.md +++ b/docs/merlin7/01-Quick-Start-Guide/requesting-projects.md @@ -1,12 +1,4 @@ ---- -title: Requesting a Merlin Project -#tags: -keywords: merlin project, project, snow, service now -last_updated: 07 September 2022 -#summary: "" -sidebar: merlin7_sidebar -permalink: /merlin7/request-project.html ---- +# Requesting a Merlin Project A project owns its own storage area in Merlin, which can be accessed by other group members. @@ -21,21 +13,21 @@ This document explains how to request new Unix group, to request membership for ## About Unix groups -Before requesting a Merlin project, it is important to have a Unix group that can be used to grant access to it to different members +Before requesting a Merlin project, it is important to have a Unix group that can be used to grant access to it to different members of the project. Unix groups in the PSI Active Directory (which is the PSI central database containing user and group information, and more) are defined by the `unx-` prefix, followed by a name. -In general, PSI employees working on Linux systems (including HPC clusters, like Merlin) can request for a non-existing Unix group, and can become responsible for managing it. +In general, PSI employees working on Linux systems (including HPC clusters, like Merlin) can request for a non-existing Unix group, and can become responsible for managing it. In addition, a list of administrators can be set. The administrators, together with the group manager, can approve or deny membership requests. Further information about this topic is covered in the [Linux Documentation - Services Admin Guides: Unix Groups / Group Management](https://linux.psi.ch/admin-guide/configuration/basic/users_and_groups.html), managed by the Central Linux Team. To gran access to specific Merlin project directories, some users may require to be added to some specific **Unix groups**: - * Each Merlin project (i.e. `/data/project/{bio|general}/$projectname`) or experiment (i.e. `/data/experiment/$experimentname`) directory has access restricted by ownership and group membership (with a very few exceptions allowing public access). - * Users requiring access to a specific restricted project or experiment directory have to request membership for the corresponding Unix group owning the directory. + * Each Merlin project (i.e. `/data/project/{bio|general}/$projectname`) or experiment (i.e. `/data/experiment/$experimentname`) directory has access restricted by ownership and group membership (with a very few exceptions allowing public access). + * Users requiring access to a specific restricted project or experiment directory have to request membership for the corresponding Unix group owning the directory. ### Requesting a new Unix group -**If you need a new Unix group** to be created, you need to first get this group through a separate +**If you need a new Unix group** to be created, you need to first get this group through a separate **[PSI Service Now ticket](https://psi.service-now.com/psisp)**. **Please use the following template.** You can also specify the login names of the initial group members and the **owner** of the group. The owner of the group is the person who will be allowed to modify the group. @@ -48,9 +40,9 @@ The owner of the group is the person who will be allowed to modify the group. * and base the text field of the request on this template ``` Dear HelpDesk - + I would like to request a new unix group. - + Unix Group Name: unx-xxxxx Initial Group Members: xxxxx, yyyyy, zzzzz, ... Group Owner: xxxxx @@ -62,6 +54,7 @@ The owner of the group is the person who will be allowed to modify the group. ### Requesting Unix group membership Existing Merlin projects have already a Unix group assigned. To have access to a project, users must belong to the proper **Unix group** owning that project. + Supervisors should inform new users which extra groups are needed for their project(s). If this information is not known, one can check the permissions for that directory. In example: ```bash (base) ❄ [caubet_m@merlin-l-001:/data/user/caubet_m]# ls -ltrhd /data/project/general/$projectname @@ -95,16 +88,16 @@ To request a project, please provide the following information in a **[PSI Servi * and base the text field of the request on this template ``` Dear HelpDesk - + I would like to request a new Merlin7 project. - + Project Name: xxxxx UnixGroup: xxxxx # Must be an existing Unix Group The project responsible is the Owner of the Unix Group. If you need a storage quota exceeding the defaults, please provide a description and motivation for the higher storage needs: - + Storage Quota: 1TB with a maximum of 1M Files Reason: (None for default 1TB/1M) diff --git a/docs/merlin7/02-How-To-Use-Merlin/archive.md b/docs/merlin7/02-How-To-Use-Merlin/archive.md index 5f91503..931933f 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/archive.md +++ b/docs/merlin7/02-How-To-Use-Merlin/archive.md @@ -1,12 +1,4 @@ ---- -title: Archive & PSI Data Catalog -#tags: -keywords: linux, archive, data catalog, archiving, lts, tape, long term storage, ingestion, datacatalog -last_updated: 31 January 2020 -summary: "This document describes how to use the PSI Data Catalog for archiving Merlin7 data." -sidebar: merlin7_sidebar -permalink: /merlin7/archive.html ---- +# Archive & PSI Data Catalog ## PSI Data Catalog as a PSI Central Service @@ -19,14 +11,14 @@ The Data Catalog and Archive is suitable for: * Derived data produced by processing some inputs * Data required to reproduce PSI research and publications -The Data Catalog is part of PSI's effort to conform to the FAIR principles for data management. -In accordance with this policy, ***data will be publicly released under CC-BY-SA 4.0 after an +The Data Catalog is part of PSI's effort to conform to the FAIR principles for data management. +In accordance with this policy, ***data will be publicly released under CC-BY-SA 4.0 after an embargo period expires.*** -The Merlin cluster is connected to the Data Catalog. Hence, users archive data stored in the +The Merlin cluster is connected to the Data Catalog. Hence, users archive data stored in the Merlin storage under the ``/data`` directories (currentlyi, ``/data/user`` and ``/data/project``). Archiving from other directories is also possible, however the process is much slower as data -can not be directly retrieved by the PSI archive central servers (**central mode**), and needs to +can not be directly retrieved by the PSI archive central servers (**central mode**), and needs to be indirectly copied to these (**decentral mode**). Archiving can be done from any node accessible by the users (usually from the login nodes). @@ -48,33 +40,33 @@ Archiving can be done from any node accessible by the users (usually from the lo Below are the main steps for using the Data Catalog. * Ingest the dataset into the Data Catalog. This makes the data known to the Data Catalog system at PSI: - * Prepare a metadata file describing the dataset - * Run **``datasetIngestor``** script - * If necessary, the script will copy the data to the PSI archive servers - * Usually this is necessary when archiving from directories other than **``/data/user``** or + * Prepare a metadata file describing the dataset + * Run **``datasetIngestor``** script + * If necessary, the script will copy the data to the PSI archive servers + * Usually this is necessary when archiving from directories other than **``/data/user``** or **``/data/project``**. It would be also necessary when the Merlin export server (**``merlin-archive.psi.ch``**) is down for any reason. * Archive the dataset: - * Visit [https://discovery.psi.ch](https://discovery.psi.ch) - * Click **``Archive``** for the dataset - * The system will now copy the data to the PetaByte Archive at CSCS + * Visit [) + * Click **``Archive``** for the dataset + * The system will now copy the data to the PetaByte Archive at CSCS * Retrieve data from the catalog: - * Find the dataset on [https://discovery.psi.ch](https://discovery.psi.ch) and click **``Retrieve``** - * Wait for the data to be copied to the PSI retrieval system - * Run **``datasetRetriever``** script + * Find the dataset on [) and click **``Retrieve``** + * Wait for the data to be copied to the PSI retrieval system + * Run **``datasetRetriever``** script -Since large data sets may take a lot of time to transfer, some steps are designed to happen in the -background. The discovery website can be used to track the progress of each step. +Since large data sets may take a lot of time to transfer, some steps are designed to happen in the +background. The discovery website can be used to track the progress of each step. ### Account Registration -Two types of account permit access to the Data Catalog. If your data was collected at a ***beamline***, you may -have been assigned a **``p-group``** (e.g. ``p12345``) for the experiment. Other users are assigned **``a-group``** -(e.g. ``a-12345``). +Two types of account permit access to the Data Catalog. If your data was collected at a ***beamline***, you may +have been assigned a **``p-group``** (e.g. ``p12345``) for the experiment. Other users are assigned **``a-group``** +(e.g. ``a-12345``). Groups are usually assigned to a PI, and then individual user accounts are added to the group. This must be done under user request through PSI Service Now. For existing **a-groups** and **p-groups**, you can follow the standard -central procedures. Alternatively, if you do not know how to do that, follow the Merlin7 +central procedures. Alternatively, if you do not know how to do that, follow the Merlin7 **[Requesting extra Unix groups](../01-Quick-Start-Guide/requesting-accounts.md)** procedure, or open a **[PSI Service Now](https://psi.service-now.com/psisp)** ticket. @@ -114,11 +106,11 @@ $ SCICAT_TOKEN=RqYMZcqpqMJqluplbNYXLeSyJISLXfnkwlfBKuvTSdnlpKkU Tokens expire after 2 weeks and will need to be fetched from the website again. -### Ingestion +### Ingestion -The first step to ingesting your data into the catalog is to prepare a file describing what data you have. This is called -**``metadata.json``**, and can be created with a text editor (e.g. *``vim``*). It can in principle be saved anywhere, -but keeping it with your archived data is recommended. For more information about the format, see the 'Bio metadata' +The first step to ingesting your data into the catalog is to prepare a file describing what data you have. This is called +**``metadata.json``**, and can be created with a text editor (e.g. *``vim``*). It can in principle be saved anywhere, +but keeping it with your archived data is recommended. For more information about the format, see the 'Bio metadata' section below. An example follows: ```yaml @@ -176,30 +168,31 @@ It will ask for your PSI credentials and then print some info about the data to datasetIngestor --token $SCICAT_TOKEN --ingest --autoarchive metadata.json ``` -You will be asked whether you want to copy the data to the central system: +You will be asked whether you want to copy the data to the central system: + +* If you are on the Merlin cluster and you are archiving data from ``/data/user`` or ``/data/project``, answer 'no' since the data catalog can -* If you are on the Merlin cluster and you are archiving data from ``/data/user`` or ``/data/project``, answer 'no' since the data catalog can directly read the data. -* If you are on a directory other than ``/data/user`` and ``/data/project, or you are on a desktop computer, answer 'yes'. Copying large datasets +* If you are on a directory other than ``/data/user`` and ``/data/project, or you are on a desktop computer, answer 'yes'. Copying large datasets to the PSI archive system may take quite a while (minutes to hours). -If there are no errors, your data has been accepted into the data catalog! From now on, no changes should be made to the ingested data. -This is important, since the next step is for the system to copy all the data to the CSCS Petabyte archive. Writing to tape is slow, so +If there are no errors, your data has been accepted into the data catalog! From now on, no changes should be made to the ingested data. +This is important, since the next step is for the system to copy all the data to the CSCS Petabyte archive. Writing to tape is slow, so this process may take several days, and it will fail if any modifications are detected. -If using the ``--autoarchive`` option as suggested above, your dataset should now be in the queue. Check the data catalog: -[https://discovery.psi.ch](https://discovery.psi.ch). Your job should have status 'WorkInProgress'. You will receive an email when the ingestion +If using the ``--autoarchive`` option as suggested above, your dataset should now be in the queue. Check the data catalog: +[). Your job should have status 'WorkInProgress'. You will receive an email when the ingestion is complete. -If you didn't use ``--autoarchive``, you need to manually move the dataset into the archive queue. From **discovery.psi.ch**, navigate to the 'Archive' -tab. You should see the newly ingested dataset. Check the dataset and click **``Archive``**. You should see the status change from **``datasetCreated``** to +If you didn't use ``--autoarchive``, you need to manually move the dataset into the archive queue. From **discovery.psi.ch**, navigate to the 'Archive' +tab. You should see the newly ingested dataset. Check the dataset and click **``Archive``**. You should see the status change from **``datasetCreated``** to **``scheduleArchiveJob``**. This indicates that the data is in the process of being transferred to CSCS. After a few days the dataset's status will change to **``datasetOnAchive``** indicating the data is stored. At this point it is safe to delete the data. #### Useful commands -Running the datasetIngestor in dry mode (**without** ``--ingest``) finds most errors. However, it is sometimes convenient to find potential errors +Running the datasetIngestor in dry mode (**without** ``--ingest``) finds most errors. However, it is sometimes convenient to find potential errors yourself with simple unix commands. Find problematic filenames @@ -239,8 +232,8 @@ find . -name '*#autosave#' -delete Certificate invalid: name is not a listed principal ``` It indicates that no kerberos token was provided for authentication. You can avoid the warning by first running kinit (PSI linux systems). - -* For decentral ingestion cases, the copy step is indicated by a message ``Running [/usr/bin/rsync -e ssh -avxz ...``. It is expected that this + +* For decentral ingestion cases, the copy step is indicated by a message ``Running [/usr/bin/rsync -e ssh -avxz ...``. It is expected that this step will take a long time and may appear to have hung. You can check what files have been successfully transfered using rsync: ```bash @@ -250,7 +243,7 @@ step will take a long time and may appear to have hung. You can check what files where UID is the dataset ID (12345678-1234-1234-1234-123456789012) and PATH is the absolute path to your data. Note that rsync creates directories first and that the transfer order is not alphabetical in some cases, but it should be possible to see whether any data has transferred. * There is currently a limit on the number of files per dataset (technically, the limit is from the total length of all file paths). It is recommended to break up datasets into 300'000 files or less. - * If it is not possible or desirable to split data between multiple datasets, an alternate work-around is to package files into a tarball. For datasets which are already compressed, omit the -z option for a considerable speedup: + * If it is not possible or desirable to split data between multiple datasets, an alternate work-around is to package files into a tarball. For datasets which are already compressed, omit the -z option for a considerable speedup: ``` tar -f [output].tar [srcdir] @@ -271,7 +264,6 @@ step will take a long time and may appear to have hung. You can check what files /data/project/bio/myproject/archive $ datasetIngestor -copy -autoarchive -allowexistingsource -ingest metadata.json 2019/11/06 11:04:43 Latest version: 1.1.11 - 2019/11/06 11:04:43 Your version of this program is up-to-date 2019/11/06 11:04:43 You are about to add a dataset to the === production === data catalog environment... 2019/11/06 11:04:43 Your username: @@ -321,7 +313,6 @@ user_n@pb-archive.psi.ch's password: 2019/11/06 11:05:04 The source folder /data/project/bio/myproject/archive is not centrally available (decentral use case). The data must first be copied to a rsync cache server. - 2019/11/06 11:05:04 Do you want to continue (Y/n)? Y 2019/11/06 11:05:09 Created dataset with id 12.345.67890/12345678-1234-1234-1234-123456789012 @@ -359,7 +350,7 @@ user_n@pb-archive.psi.ch's password: ### Publishing -After datasets are are ingested they can be assigned a public DOI. This can be included in publications and will make the datasets on http://doi.psi.ch. +After datasets are are ingested they can be assigned a public DOI. This can be included in publications and will make the datasets on . For instructions on this, please read the ['Publish' section in the ingest manual](https://scicatproject.github.io/documentation/Ingestor/ingestManual.html#sec-8). diff --git a/docs/merlin7/02-How-To-Use-Merlin/connect-from-linux.md b/docs/merlin7/02-How-To-Use-Merlin/connect-from-linux.md index 4d25c27..adf1903 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/connect-from-linux.md +++ b/docs/merlin7/02-How-To-Use-Merlin/connect-from-linux.md @@ -1,12 +1,4 @@ ---- -title: Connecting from a Linux Client -#tags: -keywords: linux, connecting, client, configuration, SSH, X11 -last_updated: 07 September 2022 -summary: "This document describes a recommended setup for a Linux client." -sidebar: merlin7_sidebar -permalink: /merlin7/connect-from-linux.html ---- +# Connecting from a Linux Client ## SSH without X11 Forwarding diff --git a/docs/merlin7/02-How-To-Use-Merlin/connect-from-macos.md b/docs/merlin7/02-How-To-Use-Merlin/connect-from-macos.md index 08ba309..8317844 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/connect-from-macos.md +++ b/docs/merlin7/02-How-To-Use-Merlin/connect-from-macos.md @@ -1,12 +1,4 @@ ---- -title: Connecting from a MacOS Client -#tags: -keywords: MacOS, mac os, mac, connecting, client, configuration, SSH, X11 -last_updated: 07 September 2022 -summary: "This document describes a recommended setup for a MacOS client." -sidebar: merlin7_sidebar -permalink: /merlin7/connect-from-macos.html ---- +# Connecting from a MacOS Client ## SSH without X11 Forwarding @@ -37,7 +29,7 @@ we provide a small recipe for enabling X11 Forwarding in MacOS. * For enabling client X11 forwarding, add the following to the start of ``~/.ssh/config`` to implicitly add ``-X`` to all ssh connections: - + ```bash ForwardAgent yes ForwardX11Trusted yes diff --git a/docs/merlin7/02-How-To-Use-Merlin/connect-from-windows.md b/docs/merlin7/02-How-To-Use-Merlin/connect-from-windows.md index 0f2a599..c99b73e 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/connect-from-windows.md +++ b/docs/merlin7/02-How-To-Use-Merlin/connect-from-windows.md @@ -4,8 +4,9 @@ PuTTY is one of the most common tools for SSH. -Check, if the following software packages are installed on the Windows workstation by +Check, if the following software packages are installed on the Windows workstation by inspecting the *Start* menu (hint: use the *Search* box to save time): + * PuTTY (should be already installed) * *[Optional]* Xming (needed for [SSH with X11 Forwarding](#ssh-with-putty-with-x11-forwarding)) @@ -21,7 +22,6 @@ If they are missing, you can install them using the Software Kiosk icon on the D ![Create Merlin Session](../../images/PuTTY/Putty_Session.png) - ## SSH with PuTTY with X11 Forwarding Official X11 Forwarding support is through NoMachine. Please follow the document @@ -29,9 +29,9 @@ Official X11 Forwarding support is through NoMachine. Please follow the document [{Accessing Merlin -> NoMachine}](../02-How-To-Use-Merlin/nomachine.md) for more details. However, we provide a small recipe for enabling X11 Forwarding in Windows. -Check, if the **Xming** is installed on the Windows workstation by inspecting the +Check, if the **Xming** is installed on the Windows workstation by inspecting the *Start* menu (hint: use the *Search* box to save time). If missing, you can install it by -using the Software Kiosk icon (should be located on the Desktop). +using the Software Kiosk icon (should be located on the Desktop). 1. Ensure that a X server (**Xming**) is running. Otherwise, start it. diff --git a/docs/merlin7/02-How-To-Use-Merlin/kerberos.md b/docs/merlin7/02-How-To-Use-Merlin/kerberos.md index b109c8c..3e71c3c 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/kerberos.md +++ b/docs/merlin7/02-How-To-Use-Merlin/kerberos.md @@ -1,12 +1,4 @@ ---- -title: Kerberos and AFS authentication -#tags: -keywords: kerberos, AFS, kinit, klist, keytab, tickets, connecting, client, configuration, slurm -last_updated: 07 September 2022 -summary: "This document describes how to use Kerberos." -sidebar: merlin7_sidebar -permalink: /merlin7/kerberos.html ---- +# Kerberos and AFS authentication Projects and users have their own areas in the central PSI AFS service. In order to access to these areas, valid Kerberos and AFS tickets must be granted. @@ -58,7 +50,7 @@ Kerberos ticket is mandatory. krenew ``` - * Keep in mind that the maximum lifetime for granting tickets is 7 days, therefore `krenew` can not be used beyond that limit, + * Keep in mind that the maximum lifetime for granting tickets is 7 days, therefore `krenew` can not be used beyond that limit, and then `kinit` should be used instead. ## Obtanining granting tickets with keytab @@ -95,8 +87,8 @@ For generating a **keytab**, one has to: ``` Please note: - * That you will need to add your password once. This step is required for generating the **keytab** file. - * `ktutil`does **not** report an error if you enter a wrong password! You can test with the `kinit` command documented below. If `kinit` fails with an error message like "pre-authentication failed", this is usually due to a wrong password/key in the keytab file. In this case **you have to remove the keytab file** and re-run the `ktutil` command. See "Updating the keytab file" in the section below. + * That you will need to add your password once. This step is required for generating the **keytab** file. + * `ktutil`does **not** report an error if you enter a wrong password! You can test with the `kinit` command documented below. If `kinit` fails with an error message like "pre-authentication failed", this is usually due to a wrong password/key in the keytab file. In this case **you have to remove the keytab file** and re-run the `ktutil` command. See "Updating the keytab file" in the section below. ### Updating an existing keytab file @@ -177,7 +169,7 @@ This is the **recommended** way. At the end of the job, is strongly recommended #SBATCH --output=run.out # Generate custom output file #SBATCH --error=run.err # Generate custom error file #SBATCH --nodes=1 # Uncomment and specify #nodes to use -#SBATCH --ntasks=1 # Uncomment and specify #nodes to use +#SBATCH --ntasks=1 # Uncomment and specify #nodes to use #SBATCH --cpus-per-task=1 #SBATCH --constraint=xeon-gold-6152 #SBATCH --hint=nomultithread diff --git a/docs/merlin7/02-How-To-Use-Merlin/merlin-rmount.md b/docs/merlin7/02-How-To-Use-Merlin/merlin-rmount.md index 69454fd..e18bbf9 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/merlin-rmount.md +++ b/docs/merlin7/02-How-To-Use-Merlin/merlin-rmount.md @@ -10,10 +10,8 @@ provides a helpful wrapper over the Gnome storage utilities (GIO and GVFS), and - FTP, SFTP - [complete list](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_the_desktop_environment_in_rhel_8/managing-storage-volumes-in-gnome_using-the-desktop-environment-in-rhel-8#gvfs-back-ends_managing-storage-volumes-in-gnome) - ## Usage - ### Start a session First, start a new session. This will start a new bash shell in the current terminal where you can add further commands. @@ -38,7 +36,7 @@ merlin_rmount --select-mount Select the desired url using the arrow keys. ![merlin_rmount --select-mount](../../images/rmount/select-mount.png) - + From this list any of the standard supported endpoints can be mounted. ### Other endpoints @@ -47,7 +45,6 @@ Other endpoints can be mounted using the `merlin_rmount --mount ` comm ![merlin_rmount --mount](../../images/rmount/mount.png) - ### Accessing Files After mounting a volume the script will print the mountpoint. It should be of the form @@ -67,7 +64,6 @@ ln -s ~/mnt /run/user/$UID/gvfs Files are accessible as long as the `merlin_rmount` shell remains open. - ### Disconnecting To disconnect, close the session with one of the following: @@ -78,7 +74,6 @@ To disconnect, close the session with one of the following: Disconnecting will unmount all volumes. - ## Alternatives ### Thunar diff --git a/docs/merlin7/02-How-To-Use-Merlin/merlin_tools.md b/docs/merlin7/02-How-To-Use-Merlin/merlin_tools.md index 03e4a12..1d98504 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/merlin_tools.md +++ b/docs/merlin7/02-How-To-Use-Merlin/merlin_tools.md @@ -1,12 +1,4 @@ ---- -title: Merlin7 Tools -#tags: -keywords: merlin_quotas -#last_updated: 07 September 2022 -#summary: "" -sidebar: merlin7_sidebar -permalink: /merlin7/tools.html ---- +# Merlin7 Tools ## About @@ -27,17 +19,17 @@ found on the [Storage page](storage.md#dir_classes). Simply calling `merlin_quotas` will show you a table of our quotas: ```console -$ merlin_quotas +$ merlin_quotas Path SpaceUsed SpaceQuota Space % FilesUsed FilesQuota Files % -------------- --------- ---------- ------- --------- ---------- ------- -/data/user 30.26G 1T 03% 367296 2097152 18% +/data/user 30.26G 1T 03% 367296 2097152 18% └─ /afs/psi.ch 3.4G 9.5G 36% 0 0 00% - └─ user/ -/data/project 2.457T 10T 25% 58 2097152 00% - └─ bio/shared -/data/project 338.3G 10T 03% 199391 2097152 10% - └─ bio/hpce + └─ user/ +/data/project 2.457T 10T 25% 58 2097152 00% + └─ bio/shared +/data/project 338.3G 10T 03% 199391 2097152 10% + └─ bio/hpce ``` !!! tip @@ -105,4 +97,3 @@ If you are added/removed from a project, you can update this config file by calling `merlin_quotas genconf --force` (notice the `--force`, which will overwrite your existing config file) or by editing the file by hand (*not recommended*). - diff --git a/docs/merlin7/02-How-To-Use-Merlin/nomachine.md b/docs/merlin7/02-How-To-Use-Merlin/nomachine.md index 276e03e..0f8ec7c 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/nomachine.md +++ b/docs/merlin7/02-How-To-Use-Merlin/nomachine.md @@ -1,10 +1,4 @@ ---- -title: Remote Desktop Access to Merlin7 -keywords: NX, NoMachine, remote desktop access, login node, login001, login002, merlin7-nx-01, merlin7-nx, nx.psi.ch, VPN, browser access -last_updated: 07 August 2024 -sidebar: merlin7_sidebar -permalink: /merlin7/nomachine.html ---- +# Remote Desktop Access to Merlin7 ## Overview @@ -21,7 +15,7 @@ If you are inside the PSI network, you can directly connect to the Merlin7 NoMac #### Method 1: Using a Web Browser -Open your web browser and navigate to [https://merlin7-nx.psi.ch:4443](https://merlin7-nx.psi.ch:4443). +Open your web browser and navigate to . #### Method 2: Using the NoMachine Client @@ -42,7 +36,7 @@ Documentation about the `nx.psi.ch` service can be found [here](https://www.psi. ##### Using a Web Browser -Open your web browser and navigate to [https://nx.psi.ch](https://nx.psi.ch). +Open your web browser and navigate to . ##### Using the NoMachine Client diff --git a/docs/merlin7/02-How-To-Use-Merlin/software-repositories.md b/docs/merlin7/02-How-To-Use-Merlin/software-repositories.md index c17a82b..f086237 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/software-repositories.md +++ b/docs/merlin7/02-How-To-Use-Merlin/software-repositories.md @@ -1,16 +1,8 @@ ---- -title: Software repositories -#tags: -keywords: modules, software, stable, unstable, deprecated, spack, repository, repositories -last_updated: 16 January 2024 -summary: "This page contains information about the different software repositories" -sidebar: merlin7_sidebar -permalink: /merlin7/software-repositories.html ---- +# Software repositories ## Module Systems in Merlin7 -Merlin7 provides a modular environment to ensure flexibility, compatibility, and optimized performance. +Merlin7 provides a modular environment to ensure flexibility, compatibility, and optimized performance. The system supports three primary module types: PSI Environment Modules (PModules), Spack Modules, and Cray Environment Modules. ### PSI Environment Modules (PModules) @@ -35,7 +27,7 @@ Merlin7 also provides Spack modules, offering a modern and flexible package mana ### Cray Environment Modules Merlin7 also supports Cray Environment Modules, which include compilers, MPI implementations, and libraries optimized -for Cray systems. However, Cray modules are not recommended as the default choice due to potential backward compatibility +for Cray systems. However, Cray modules are not recommended as the default choice due to potential backward compatibility issues when the Cray Programming Environment (CPE) is upgraded to a newer version. Recommendations: diff --git a/docs/merlin7/02-How-To-Use-Merlin/ssh-keys.md b/docs/merlin7/02-How-To-Use-Merlin/ssh-keys.md index 8f08708..e58576a 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/ssh-keys.md +++ b/docs/merlin7/02-How-To-Use-Merlin/ssh-keys.md @@ -1,13 +1,4 @@ ---- -title: Configuring SSH Keys in Merlin - -#tags: -keywords: linux, connecting, client, configuration, SSH, Keys, SSH-Keys, RSA, authorization, authentication -last_updated: 15 Jul 2020 -summary: "This document describes how to deploy SSH Keys in Merlin." -sidebar: merlin7_sidebar -permalink: /merlin7/ssh-keys.html ---- +# Configuring SSH Keys in Merlin Merlin users sometimes will need to access the different Merlin services without being constantly requested by a password. One can achieve that with Kerberos authentication, however in some cases some software would require the setup of SSH Keys. @@ -22,14 +13,14 @@ User can check whether a SSH key already exists. These would be placed in the ** is usually the default one, and files in there would be **`id_rsa`** (private key) and **`id_rsa.pub`** (public key). ```bash -ls ~/.ssh/id* +ls ~/.ssh/id* ``` For creating **SSH RSA Keys**, one should: 1. Run `ssh-keygen`, a password will be requested twice. You **must remember** this password for the future. - * Due to security reasons, ***always try protecting it with a password***. There is only one exception, when running ANSYS software, which in general should not use password to simplify the way of running the software in Slurm. - * This will generate a private key **id_rsa**, and a public key **id_rsa.pub** in your **~/.ssh** directory. + * Due to security reasons, ***always try protecting it with a password***. There is only one exception, when running ANSYS software, which in general should not use password to simplify the way of running the software in Slurm. + * This will generate a private key **id_rsa**, and a public key **id_rsa.pub** in your **~/.ssh** directory. 2. Add your public key to the **`authorized_keys`** file, and ensure proper permissions for that file, as follows: ```bash @@ -92,7 +83,7 @@ to the **ssh-agent**. This must be done once per SSH session, as follows: ssh-add -l | grep "/data/user/$(whoami)/.ssh" ``` -* If no key is returned in the previous step, you have to add the private key identity to the authentication agent. +* If no key is returned in the previous step, you have to add the private key identity to the authentication agent. You will be requested for the **passphrase** of your key, and it can be done by running: ```bash @@ -111,7 +102,7 @@ However, for NoMachine one always need to add the private key identity to the au ```bash ssh-add -l | grep "/data/user/$(whoami)/.ssh" ``` -2. If no key is returned in the previous step, you have to add the private key identity to the authentication agent. +2. If no key is returned in the previous step, you have to add the private key identity to the authentication agent. You will be requested for the **passphrase** of your key, and it can be done by running: ```bash diff --git a/docs/merlin7/02-How-To-Use-Merlin/storage.md b/docs/merlin7/02-How-To-Use-Merlin/storage.md index c03a7e1..8602830 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/storage.md +++ b/docs/merlin7/02-How-To-Use-Merlin/storage.md @@ -1,13 +1,4 @@ ---- -title: Merlin7 Storage -#tags: -keywords: storage, /data/user, /data/software, /data/project, /scratch, /data/scratch/shared, quota, export, user, project, scratch, data, data/scratch/shared, merlin_quotas -#last_updated: 07 September 2022 -#summary: "" -sidebar: merlin7_sidebar -redirect_from: /merlin7/data-directories.html -permalink: /merlin7/storage.html ---- +# Merlin7 Storage ## Introduction @@ -30,13 +21,13 @@ Some of the Merlin7 directories have quotas applied. A way for checking the quot This command is useful to show all quotas for the different user storage directories and partitions (including AFS). To check your quotas, please run: ```console -$ merlin_quotas +$ merlin_quotas Path SpaceUsed SpaceQuota Space % FilesUsed FilesQuota Files % -------------- --------- ---------- ------- --------- ---------- ------- -/data/user 30.26G 1T 03% 367296 2097152 18% +/data/user 30.26G 1T 03% 367296 2097152 18% └─ -/afs/psi.ch 3.4G 9.5G 36% 0 0 0% - └─ user/ +/afs/psi.ch 3.4G 9.5G 36% 0 0 0% + └─ user/ /data/scratch 688.9M 2T 00% 368471 0 00% └─ shared /data/project 3.373T 11T 31% 425644 2097152 20% @@ -117,7 +108,7 @@ Directory policies: * No backup policy is applied for the user home directories: **users are responsible for backing up their data**. Home directory quotas are defined in a per Lustre project basis. The quota can be checked using the `merlin_quotas` command described -[above](storage.md#how-to-check-quotas). +[above](storage.md#how-to-check-quotas). ### Project data directory @@ -151,7 +142,7 @@ Directory policies: * Read **[Important: Code of Conduct](../01-Quick-Start-Guide/code-of-conduct.md)** for more information about Merlin7 policies. * It is **forbidden** to use the data directories as `/scratch` area during a job's runtime, i.e. for high throughput I/O for a job's temporary files. - * Please Use `/scratch`, `/data/scratch/shared` for this purpose. + * Please Use `/scratch`, `/data/scratch/shared` for this purpose. * No backups: users are responsible for managing the backups of their data directories. #### Dedicated project directories @@ -190,6 +181,6 @@ Scratch directories policies: * Read **[Important: Code of Conduct](../01-Quick-Start-Guide/code-of-conduct.md)** for more information about Merlin7 policies. * By default, *always* use **local** first and only use **shared** if your specific use case requires it. * Temporary files *must be deleted at the end of the job by the user*. - * Remaining files will be deleted by the system if detected. + * Remaining files will be deleted by the system if detected. * Files not accessed within 28 days will be automatically cleaned up by the system. * If for some reason the scratch areas get full, admins have the rights to cleanup the oldest data. diff --git a/docs/merlin7/02-How-To-Use-Merlin/transfer-data.md b/docs/merlin7/02-How-To-Use-Merlin/transfer-data.md index 343d5e8..7240505 100644 --- a/docs/merlin7/02-How-To-Use-Merlin/transfer-data.md +++ b/docs/merlin7/02-How-To-Use-Merlin/transfer-data.md @@ -1,26 +1,19 @@ ---- -title: Transferring Data -#tags: -keywords: transferring data, data transfer, rsync, winscp, copy data, copying, sftp, import, export, hop, vpn -last_updated: 24 August 2023 -#summary: "" -sidebar: merlin7_sidebar -permalink: /merlin7/transfer-data.html ---- +# Transferring Data ## Overview Most data transfer methods support both sending and receiving, so you may initiate the transfer from either **Merlin** or the other system — depending on **network visibility**. -- **From PSI Network to Merlin:** Merlin login nodes are visible from the PSI network, so direct transfers using `rsync`, or **ftp** are generally preferable. Transfers **from Merlin7 to PSI may require special firewall rules**. -- **From Merlin to the Internet:** Merlin login nodes can access the internet with a **limited set of protocols**: - - HTTP-based protocols on ports `80` or `445` (e.g., HTTPS, WebDAV). - - Other protocols (e.g., SSH, FTP, rsync daemon mode) require admin configuration, may only work with specific hosts, and might need new firewall rules. -- **From the Internet to PSI:** Systems outside PSI can access the [PSI Data Transfer Service](https://www.psi.ch/en/photon-science-data-services/data-transfer) at `datatransfer.psi.ch` using SSH-based protocols or [Globus](https://www.globus.org/). -> SSH-based protocols using port `22` **to most PSI servers** are generally **not permitted**. -> * However, **transfers from any PSI host to Merlin7 using port 22 are allowed**. -> -> Port `21` is also available for FTP transfers from PSI to Merlin7. +* **From PSI Network to Merlin:** Merlin login nodes are visible from the PSI network, so direct transfers using `rsync`, or **ftp** are generally preferable. Transfers **from Merlin7 to PSI may require special firewall rules**. +* **From Merlin to the Internet:** Merlin login nodes can access the internet with a **limited set of protocols**: + * HTTP-based protocols on ports `80` or `445` (e.g., HTTPS, WebDAV). + * Other protocols (e.g., SSH, FTP, rsync daemon mode) require admin configuration, may only work with specific hosts, and might need new firewall rules. +* **From the Internet to PSI:** Systems outside PSI can access the [PSI Data Transfer Service](https://www.psi.ch/en/photon-science-data-services/data-transfer) at `datatransfer.psi.ch` using SSH-based protocols or [Globus](https://www.globus.org/). + +!!! note + SSH-based protocols using port `22` **to most PSI servers** are generally **not permitted**. + However, **transfers from any PSI host to Merlin7 using port 22 are allowed**. + Port `21` is also available for FTP transfers from PSI to Merlin7. ### Choosing the best transfer method @@ -46,6 +39,7 @@ The following methods transfer data directly via the [login nodes](../01-Quick-S ### Rsync (Recommended for Linux/macOS) Rsync is the **preferred** method for small datasets from Linux/macOS systems. It supports **resuming interrupted transfers** and **skips already transferred files**. Syntax: + ```bash rsync -avAHXS ``` @@ -65,12 +59,15 @@ rsync -avAHXS ~/localdata $USER@login001.merlin7.psi.ch:/data/project/general/my ### SCP SCP works similarly to `rsync` but **does not support resuming** interrupted transfers. It may be used for quick one-off transfers. Example: + ```bash scp ~/localfile.txt $USER@login001.merlin7.psi.ch:/data/project/general/myproject/ ``` ### Secure FTP + A `vsftpd` service is available on the login nodes, providing high-speed transfers. Choose the server based on your **speed vs. encryption** needs: + * **`login001.merlin7.psi.ch`:** Encrypted control & data channels. **Use if your data is sensitive**. **Slower**, but secure. * **`service03.merlin7.psi.ch`**: Encrypted control channel only. @@ -80,14 +77,16 @@ A `vsftpd` service is available on the login nodes, providing high-speed transfe The **control channel** is always **encrypted**, therefore, authentication is encrypted and secured. ## UI-based Clients for Data Transfer + ### WinSCP (Windows) Available in the **Software Kiosk** on PSI Windows machines. -* Using your PSI credentials, connect to - * when using port 22, connect to `login001.merlin7.psi.ch` or `login002.merlin7.psi.ch`. - * when using port 21, connect to: - * `ftp-encrypted.merlin7.psi.ch`: **Fast** transfer rates. **Both** control and data **channels encrypted**. - * `service03.merlin7.psi.ch`: **Fastest** transfer rates, but **data channel not encrypted**. + +* Using your PSI credentials, connect to + * when using port 22, connect to `login001.merlin7.psi.ch` or `login002.merlin7.psi.ch`. + * when using port 21, connect to: + * `ftp-encrypted.merlin7.psi.ch`: **Fast** transfer rates. **Both** control and data **channels encrypted**. + * `service03.merlin7.psi.ch`: **Fastest** transfer rates, but **data channel not encrypted**. * Drag and drop files between your PC and Merlin. * FTP (port 21) @@ -95,30 +94,34 @@ Available in the **Software Kiosk** on PSI Windows machines. ### FileZilla (Linux/MacOS/Windows) Download from [FileZilla Project](https://filezilla-project.org/), or install from your Linux software repositories if available. -* Using your PSI credentials, connect to - * when using port 22, connect to `login001.merlin7.psi.ch` or `login002.merlin7.psi.ch`. - * when using port 21, connect to: - * `ftp-encrypted.merlin7.psi.ch`: **Fast** transfer rates. **Both** control and data **channels encrypted**. - * `service03.merlin7.psi.ch`: **Fastest** transfer rates, but **data channel not encrypted**. + +* Using your PSI credentials, connect to + * when using port 22, connect to `login001.merlin7.psi.ch` or `login002.merlin7.psi.ch`. + * when using port 21, connect to: + * `ftp-encrypted.merlin7.psi.ch`: **Fast** transfer rates. **Both** control and data **channels encrypted**. + * `service03.merlin7.psi.ch`: **Fastest** transfer rates, but **data channel not encrypted**. * Supports drag-and-drop file transfers. ## Sharing Files with SWITCHfilesender **[SWITCHfilesender](https://filesender.switch.ch/filesender2/?s=upload)** is a Swiss-hosted installation of the [FileSender](https://filesender.org/) project — a web-based application that allows authenticated users to securely and easily send **arbitrarily large files** to other users. Features: -- **Secure large file transfers:** Send files that exceed normal email attachment limits. -- **Time-limited availability:** Files are automatically deleted after the chosen expiration date or number of downloads. -- **Voucher system:** Authenticated users can send upload vouchers to external recipients without an account. -- **Designed for research & education:** Developed to meet the needs of universities and research institutions. + +* **Secure large file transfers:** Send files that exceed normal email attachment limits. +* **Time-limited availability:** Files are automatically deleted after the chosen expiration date or number of downloads. +* **Voucher system:** Authenticated users can send upload vouchers to external recipients without an account. +* **Designed for research & education:** Developed to meet the needs of universities and research institutions. About the authentication: -- It uses **SimpleSAMLphp**, supporting multiple authentication mechanisms: SAML2, LDAP, RADIUS and more. -- It's fully integrated with PSI's **Authentication and Authorization Infrastructure (AAI)**. -- PSI employees can log in using their PSI account: + +* It uses **SimpleSAMLphp**, supporting multiple authentication mechanisms: SAML2, LDAP, RADIUS and more. +* It's fully integrated with PSI's **Authentication and Authorization Infrastructure (AAI)**. +* PSI employees can log in using their PSI account: 1. Open [SWITCHfilesender](https://filesender.switch.ch/filesender2/?s=upload). 2. Select **PSI** as the institution. 3. Authenticate with your PSI credentials. The service is designed to **send large files for temporary availability**, not as a permanent publishing platform. Typical use case: + 1. Upload a file. 2. Share the download link with a recipient. 3. File remains available until the specified **expiration date** is reached, or the **download limit** is reached. @@ -130,10 +133,11 @@ The service is designed to **send large files for temporary availability**, not ## PSI Data Transfer From August 2024, Merlin is connected to the **[PSI Data Transfer](https://www.psi.ch/en/photon-science-data-services/data-transfer)** service, -`datatransfer.psi.ch`. This is a central service managed by the **[Linux team](https://linux.psi.ch/index.html)**. However, any problems or questions related to it can be directly +`datatransfer.psi.ch`. This is a central service managed by the **[Linux team](https://linux.psi.ch/index.html)**. However, any problems or questions related to it can be directly [reported](../99-support/contact.md) to the Merlin administrators, which will forward the request if necessary. The PSI Data Transfer servers supports the following protocols: + * Data Transfer - SSH (scp / rsync) * Data Transfer - Globus @@ -150,27 +154,25 @@ Therefore, having the Microsoft Authenticator App is required as explained [here ## Connecting to Merlin7 from outside PSI Merlin7 is fully accessible from within the PSI network. To connect from outside you can use: -- [VPN](https://www.psi.ch/en/computing/vpn) ([alternate instructions](https://intranet.psi.ch/BIO/ComputingVPN)) -- [SSH hopx](https://www.psi.ch/en/computing/ssh-hop) - * Please avoid transferring big amount data through **hop** -- [No Machine](nomachine.md) - * Remote Interactive Access through [**'nx.psi.ch'**](https://www.psi.ch/en/photon-science-data-services/remote-interactive-access) - * Please avoid transferring big amount of data through **NoMachine** -{% comment %} +* [VPN](https://www.psi.ch/en/computing/vpn) ([alternate instructions](https://intranet.psi.ch/BIO/ComputingVPN)) +* [SSH hopx](https://www.psi.ch/en/computing/ssh-hop) + * Please avoid transferring big amount data through **hop** +* [No Machine](nomachine.md) + * Remote Interactive Access through [**'nx.psi.ch'**](https://www.psi.ch/en/photon-science-data-services/remote-interactive-access) + * Please avoid transferring big amount of data through **NoMachine** + ## Connecting from Merlin7 to outside file shares ### `merlin_rmount` command Merlin provides a command for mounting remote file systems, called `merlin_rmount`. This provides a helpful wrapper over the Gnome storage utilities, and provides support for a wide range of remote file formats, including -- SMB/CIFS (Windows shared folders) -- WebDav -- AFP -- FTP, SFTP -- [others](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_the_desktop_environment_in_rhel_8/managing-storage-volumes-in-gnome_using-the-desktop-environment-in-rhel-8#gvfs-back-ends_managing-storage-volumes-in-gnome) +* SMB/CIFS (Windows shared folders) +* WebDav +* AFP +* FTP, SFTP +* [others](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_the_desktop_environment_in_rhel_8/managing-storage-volumes-in-gnome_using-the-desktop-environment-in-rhel-8#gvfs-back-ends_managing-storage-volumes-in-gnome) [More instruction on using `merlin_rmount`](merlin-rmount.md) -{% endcomment %} - diff --git a/docs/merlin7/03-Slurm-General-Documentation/interactive-jobs.md b/docs/merlin7/03-Slurm-General-Documentation/interactive-jobs.md index 856b238..1fc7011 100644 --- a/docs/merlin7/03-Slurm-General-Documentation/interactive-jobs.md +++ b/docs/merlin7/03-Slurm-General-Documentation/interactive-jobs.md @@ -24,17 +24,17 @@ Is run is used to run parallel jobs in the batch system. It can be used within a (which can be run with ``sbatch``), or within a job allocation (which can be run with ``salloc``). Also, it can be used as a direct command (in example, from the login nodes). -When used inside a batch script or during a job allocation, ``srun`` is constricted to the -amount of resources allocated by the ``sbatch``/``salloc`` commands. In ``sbatch``, usually -these resources are defined inside the batch script with the format ``#SBATCH