init notmative types repo, which is moved from alphaCPP repo

configure/CONFIG

@@ -0,0 +1,30 @@
+# CONFIG
+
+# You might want to change this to some shared set of rules, e.g.
+# RULES=/path/to/epics/support/modules/rules/x-y
+RULES=$(EPICS_BASE)
+
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+
+CONFIG=$(RULES)/configure
+include $(CONFIG)/CONFIG
+
+# Override for definition in base
+INSTALL_LOCATION = $(TOP)
+include $(TOP)/configure/CONFIG_SITE
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH)
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+
+ifdef T_A
+ -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
+ -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+ -include $(TOP)/configure/O.$(T_A)/CONFIG_APP_INCLUDE
+endif
+

configure/CONFIG_SITE

@@ -0,0 +1,34 @@
+# CONFIG_SITE
+
+# Make any application-specific changes to the EPICS build
+# configuration variables in this file.
+#
+# Host/target specific settings can be specified in files named
+#  CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+#  CONFIG_SITE.Common.$(T_A)
+#  CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+# Set this when you only want to compile this application
+# for a subset of the cross-compiled target architectures
+# that Base is built for.
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
+
+# Set this when your IOC and the host use different paths
+# to access the application. This will be needed to boot
+# from a Microsoft FTP server or with some NFS mounts.
+# You must rebuild in the iocBoot directory for this to
+# take effect.
+#IOCS_APPL_TOP = <path to application top as seen by IOC>
+
+# If you don't want to install into $(TOP) then
+# define INSTALL_LOCATION here
+#INSTALL_LOCATION=<fullpathname>
+
+ifeq ($(EPICS_TEST_COVERAGE),1)
+USR_CPPFLAGS += --coverage
+USR_LDFLAGS += --coverage
+endif
+
+INSTALL_INCLUDE = $(INSTALL_LOCATION)/include/pv
+USR_INCLUDES += -I $(INSTALL_LOCATION)/include
+

configure/Makefile

@@ -0,0 +1,17 @@
+TOP=..
+
+include $(TOP)/configure/CONFIG
+
+# CHECK_RELEASE controls the consistency checking of the support
+# applications defined in the $(TOP)/configure/RELEASE* files.
+# Normally CHECK_RELEASE should be set to YES.
+# Set CHECK_RELEASE to NO to disable checking completely.
+# Set CHECK_RELEASE to WARN to perform consistency checking,
+# but continue the build even if conflicts are found.
+CHECK_RELEASE = YES
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+include $(TOP)/configure/RULES
+

configure/RELEASE

@@ -0,0 +1,31 @@
+#RELEASE Location of external products
+#
+# IF YOU MAKE ANY CHANGES to this file you MUST at least run
+# "gnumake" in this directory afterwards; you usually need
+# to run "gnumake rebuild" in the application's top level
+# directory each time this file is changed.
+#
+# NOTE: The build does not check dependencies against files
+# that are outside this application, thus you should run
+# "gnumake distclean install" in the top directory each time
+# EPICS_BASE, SNCSEQ, or any other external module defined
+# in the RELEASE file is rebuilt.
+#
+# Host/target specific settings can be specified in files named
+#  RELEASE.$(EPICS_HOST_ARCH).Common
+#  RELEASE.Common.$(T_A)
+#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+
+TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
+
+#If using the sequencer, point SNCSEQ at its top directory:
+#SNCSEQ=$(EPICS_BASE)/../modules/soft/seq
+
+# EPICS_BASE usually appears last so other apps can override stuff:
+#EPICS_BASE=/opt/epics/base
+
+#Capfast users may need the following definitions
+#CAPFAST_TEMPLATES=
+#SCH2EDIF_PATH=
+
+-include $(TOP)/configure/RELEASE.local

configure/RULES

@@ -0,0 +1,6 @@
+# RULES
+
+include $(CONFIG)/RULES
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

configure/RULES.ioc

@@ -0,0 +1,2 @@
+#RULES.ioc
+include $(CONFIG)/RULES.ioc

configure/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(CONFIG)/RULES_DIRS

configure/RULES_TOP

@@ -0,0 +1,3 @@
+#RULES_TOP
+include $(CONFIG)/RULES_TOP
+