Init Repo
This commit is contained in:
Noah Piqué
339
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c
Normal file
339
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c
Normal file
@ -0,0 +1,339 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_hal_i2c_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief I2C Extended HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of I2C Extended peripheral:
|
||||
* + Extended features functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### I2C peripheral Extended features #####
|
||||
==============================================================================
|
||||
|
||||
[..] Comparing to other previous devices, the I2C interface for STM32L4xx
|
||||
devices contains the following additional features
|
||||
|
||||
(+) Possibility to disable or enable Analog Noise Filter
|
||||
(+) Use of a configured Digital Noise Filter
|
||||
(+) Disable or enable wakeup from Stop mode(s)
|
||||
(+) Disable or enable Fast Mode Plus
|
||||
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..] This driver provides functions to configure Noise Filter and Wake Up Feature
|
||||
(#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
|
||||
(#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
|
||||
(#) Configure the enable or disable of I2C Wake Up Mode using the functions :
|
||||
(++) HAL_I2CEx_EnableWakeUp()
|
||||
(++) HAL_I2CEx_DisableWakeUp()
|
||||
(#) Configure the enable or disable of fast mode plus driving capability using the functions :
|
||||
(++) HAL_I2CEx_EnableFastModePlus()
|
||||
(++) HAL_I2CEx_DisableFastModePlus()
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32l4xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32L4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx I2CEx
|
||||
* @brief I2C Extended HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
|
||||
* @brief Extended features functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Extended features functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Configure Noise Filters
|
||||
(+) Configure Wake Up Feature
|
||||
(+) Configure Fast Mode Plus
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configure I2C Analog noise filter.
|
||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified I2Cx peripheral.
|
||||
* @param AnalogFilter New state of the Analog filter.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
||||
assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
|
||||
|
||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected I2C peripheral */
|
||||
__HAL_I2C_DISABLE(hi2c);
|
||||
|
||||
/* Reset I2Cx ANOFF bit */
|
||||
hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
|
||||
|
||||
/* Set analog filter bit*/
|
||||
hi2c->Instance->CR1 |= AnalogFilter;
|
||||
|
||||
__HAL_I2C_ENABLE(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure I2C Digital noise filter.
|
||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified I2Cx peripheral.
|
||||
* @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
|
||||
{
|
||||
uint32_t tmpreg;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
||||
assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
|
||||
|
||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected I2C peripheral */
|
||||
__HAL_I2C_DISABLE(hi2c);
|
||||
|
||||
/* Get the old register value */
|
||||
tmpreg = hi2c->Instance->CR1;
|
||||
|
||||
/* Reset I2Cx DNF bits [11:8] */
|
||||
tmpreg &= ~(I2C_CR1_DNF);
|
||||
|
||||
/* Set I2Cx DNF coefficient */
|
||||
tmpreg |= DigitalFilter << 8U;
|
||||
|
||||
/* Store the new register value */
|
||||
hi2c->Instance->CR1 = tmpreg;
|
||||
|
||||
__HAL_I2C_ENABLE(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable I2C wakeup from Stop mode(s).
|
||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified I2Cx peripheral.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
|
||||
|
||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected I2C peripheral */
|
||||
__HAL_I2C_DISABLE(hi2c);
|
||||
|
||||
/* Enable wakeup from stop mode */
|
||||
hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
|
||||
|
||||
__HAL_I2C_ENABLE(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable I2C wakeup from Stop mode(s).
|
||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified I2Cx peripheral.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
|
||||
|
||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected I2C peripheral */
|
||||
__HAL_I2C_DISABLE(hi2c);
|
||||
|
||||
/* Enable wakeup from stop mode */
|
||||
hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
|
||||
|
||||
__HAL_I2C_ENABLE(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the I2C fast mode plus driving capability.
|
||||
* @param ConfigFastModePlus Selects the pin.
|
||||
* This parameter can be one of the @ref I2CEx_FastModePlus values
|
||||
* @note For I2C1, fast mode plus driving capability can be enabled on all selected
|
||||
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
|
||||
* on each one of the following pins PB6, PB7, PB8 and PB9.
|
||||
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
|
||||
* can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
|
||||
* @note For all I2C2 pins fast mode plus driving capability can be enabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
|
||||
* @note For all I2C3 pins fast mode plus driving capability can be enabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
|
||||
* @note For all I2C4 pins fast mode plus driving capability can be enabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C4 parameter.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
|
||||
{
|
||||
/* Check the parameter */
|
||||
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
|
||||
|
||||
/* Enable SYSCFG clock */
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* Enable fast mode plus driving capability for selected pin */
|
||||
SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the I2C fast mode plus driving capability.
|
||||
* @param ConfigFastModePlus Selects the pin.
|
||||
* This parameter can be one of the @ref I2CEx_FastModePlus values
|
||||
* @note For I2C1, fast mode plus driving capability can be disabled on all selected
|
||||
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
|
||||
* on each one of the following pins PB6, PB7, PB8 and PB9.
|
||||
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
|
||||
* can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
|
||||
* @note For all I2C2 pins fast mode plus driving capability can be disabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
|
||||
* @note For all I2C3 pins fast mode plus driving capability can be disabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
|
||||
* @note For all I2C4 pins fast mode plus driving capability can be disabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C4 parameter.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
|
||||
{
|
||||
/* Check the parameter */
|
||||
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
|
||||
|
||||
/* Enable SYSCFG clock */
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* Disable fast mode plus driving capability for selected pin */
|
||||
CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user