Coldbox/TECware
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

add vs code

Browse Source
This commit is contained in:
Noah Piqué
2022-01-20 13:12:28 +01:00
parent fd665a9d94
commit c6deb28e5d
80 changed files with 3911 additions and 2433 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c
View File

@ -12,14 +12,12 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file in
* the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
******************************************************************************
*/
@ -2414,7 +2412,7 @@ void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource)
/* LSCO Pin Clock Enable */
__LSCO_CLK_ENABLE();
/* Configue the LSCO pin in analog mode */
/* Configure the LSCO pin in analog mode */
GPIO_InitStruct.Pin = LSCO_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@ -2533,7 +2531,7 @@ void HAL_RCCEx_OCTOSPIDelayConfig(uint32_t Delay1, uint32_t Delay2)
##### Extended Clock Recovery System Control functions #####
===============================================================================
[..]
For devices with Clock Recovery System feature (CRS), RCC Extention HAL driver can be used as follows:
For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows:
(#) In System clock config, HSI48 needs to be enabled
@ -3313,7 +3311,7 @@ static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFre
uint32_t pllp = 0U;
#endif /* RCC_PLLP_SUPPORT */
/* Handle SAIs */
/* Handle SAIx */
if(PeriphClk == RCC_PERIPHCLK_SAI1)
{
srcclk = __HAL_RCC_GET_SAI1_SOURCE();
@ -3551,5 +3549,4 @@ static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFre
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/