Coldbox/TECware
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

add vs code

Browse Source
This commit is contained in:
Noah Piqué
2022-01-20 13:12:28 +01:00
parent fd665a9d94
commit c6deb28e5d
80 changed files with 3911 additions and 2433 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c
View File

@ -11,13 +11,12 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
* Copyright (c) 2019 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
@ -188,7 +187,7 @@ void HAL_PWR_DisableBkUpAccess(void)
=========================================
[..]
(+) Entry:
The Sleep mode / Low-power Sleep mode is entered thru HAL_PWR_EnterSLEEPMode() API
The Sleep mode / Low-power Sleep mode is entered through HAL_PWR_EnterSLEEPMode() API
in specifying whether or not the regulator is forced to low-power mode and if exit is interrupt or event-triggered.
(++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode).
(++) PWR_LOWPOWERREGULATOR_ON: Low-power sleep (regulator in low power mode).
@ -210,7 +209,7 @@ void HAL_PWR_DisableBkUpAccess(void)
===============================
[..]
(+) Entry:
The Stop 0, Stop 1 or Stop 2 modes are entered thru the following API's:
The Stop 0, Stop 1 or Stop 2 modes are entered through the following API's:
(++) HAL_PWREx_EnterSTOP0Mode() for mode 0 or HAL_PWREx_EnterSTOP1Mode() for mode 1 or for porting reasons HAL_PWR_EnterSTOPMode().
(++) HAL_PWREx_EnterSTOP2Mode() for mode 2.
(+) Regulator setting (applicable to HAL_PWR_EnterSTOPMode() only):
@ -244,7 +243,7 @@ void HAL_PWR_DisableBkUpAccess(void)
and Standby circuitry.
(++) Entry:
(+++) The Standby mode is entered thru HAL_PWR_EnterSTANDBYMode() API.
(+++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API.
SRAM1 and register contents are lost except for registers in the Backup domain and
Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register.
To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API
@ -265,7 +264,7 @@ void HAL_PWR_DisableBkUpAccess(void)
SRAM and registers contents are lost except for backup domain registers.
(+) Entry:
The Shutdown mode is entered thru HAL_PWREx_EnterSHUTDOWNMode() API.
The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API.
(+) Exit:
(++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event,
@ -657,5 +656,3 @@ __weak void HAL_PWR_PVDCallback(void)
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/