up
No files matched your search
|
Before Width: | Height: | Size: 3.7 MiB After Width: | Height: | Size: 3.7 MiB |
|
After Width: | Height: | Size: 3.2 MiB |
|
After Width: | Height: | Size: 3.5 MiB |
|
After Width: | Height: | Size: 3.2 MiB |
|
Before Width: | Height: | Size: 3.6 MiB After Width: | Height: | Size: 3.6 MiB |
|
Before Width: | Height: | Size: 3.6 MiB After Width: | Height: | Size: 3.6 MiB |
|
Before Width: | Height: | Size: 3.4 MiB After Width: | Height: | Size: 3.4 MiB |
@@ -0,0 +1,101 @@
|
||||
# Linear Stage FAT Report Instructions
|
||||
|
||||
These instructions apply to report work inside this `Report` folder and supplement the project-root `AGENTS.md`.
|
||||
|
||||
When the user asks the agent to read the instructions and create or update the report, execute this workflow end to end: inspect the available evidence, prepare the report, compile it twice, append the measurement PDFs, visually validate every page, clean the output folder, and deliver the final `.tex` and `.pdf` files. Do not stop after producing a draft.
|
||||
|
||||
## Purpose and authoritative template
|
||||
|
||||
- Use `unused/Linear_Stage_FAT_Report_Template.tex` as the authoritative baseline for future factory acceptance test reports for linear stages. If the template is later restored to the `Report` root, use that copy instead.
|
||||
- Create a new project-specific `.tex` file. Do not overwrite the template or a completed report unless the user explicitly requests it.
|
||||
- Keep generated report files and report-only working files inside `Report`. Treat `Measurements`, `Media`, `ECMC`, `Mechanical`, and other adjacent folders as read-only evidence sources unless the user separately authorizes changes.
|
||||
- Preserve the template's wording, section order, tables, fonts, spacing, captions, page layout, and overall formatting. Change template text only where verified project-specific information must be inserted.
|
||||
|
||||
## Evidence and privacy gate
|
||||
|
||||
- Follow the data-privacy stop rule in the root `AGENTS.md` before processing sensitive information.
|
||||
- Read the complete relevant source files before drawing conclusions.
|
||||
- Use this evidence priority: signed test records and raw data; exact manufacturer documentation; approved project requirements and procedures; configuration files and logs; photographs; operator notes.
|
||||
- Record the source of every important model number, setting, limit, result, uncertainty, and conclusion.
|
||||
- Never infer physical performance from commanded motion, a writable PV, nominal encoder resolution, or a configuration file alone.
|
||||
- Preserve uncertainty and conflicts, but never write `TBD` in the issued report and never invent a value. Leave an unsupported optional value blank or omit only the value while preserving the surrounding layout. State a material evidence limitation objectively when it affects interpretation.
|
||||
|
||||
## Required preparation
|
||||
|
||||
1. Inventory the available evidence by exact filename and file type.
|
||||
2. Confirm that the six required report images are present in `../Media` with the exact basenames `I1` through `I6` and one supported extension: `.jpg`, `.jpeg`, `.png`, or `.pdf`.
|
||||
3. Confirm the exact stage, encoder, motor or actuator, drive, encoder interface, controller, firmware or revision where relevant, measurement system, calibration status, and test dates. If no exact stage model is available, omit or leave the model value blank; do not guess it and do not insert a placeholder.
|
||||
4. Extract the applicable acceptance criteria before evaluating results.
|
||||
5. Separate measured results, calculated values, manufacturer specifications, assumptions, and open points.
|
||||
6. Confirm which tests apply. Do not mark checklist fields, including with `N/A`; if applicability must be explained, state it in the report narrative without completing the user checklist.
|
||||
|
||||
## Report construction rules
|
||||
|
||||
- Do not leave `TBD`, template instructions, or placeholder text anywhere in the final source or PDF. Populate supported values from evidence; otherwise leave optional values blank or omit only the unsupported value without disturbing the template layout.
|
||||
- Use SI units by default and preserve original units where traceability requires them.
|
||||
- Distinguish command resolution, encoder resolution, minimum incremental motion, repeatability, accuracy, stability, and measurement uncertainty.
|
||||
- State test direction, orientation, payload, travel, velocity, acceleration, settling criterion, cycle count, point count, sampling conditions, and environmental conditions when applicable.
|
||||
- Keep the five-column checklist format: `Item | Checklist Item | Yes | No | Remarks`.
|
||||
- Leave every checklist response completely blank. Do not select Yes or No, add checkmarks or crosses, complete remarks, or infer checklist completion from the evidence. Only the user may fill the checklists.
|
||||
- Size the `Checklist Item` column consistently to the longest checklist sentence; let `Remarks` fill the remaining width.
|
||||
- Keep checklist headings with their tables. Do not leave orphaned subsection headings.
|
||||
- Verify every image visually. Captions must describe what the image actually shows. Do not infer a test setup from a component close-up.
|
||||
- List every raw and analysis file by exact basename using `\path{...}`. Counts alone are insufficient.
|
||||
- Integrate measured results into `Conclusions`; do not create a separate chapter that duplicates them.
|
||||
- Conclusions must compare measured values with acceptance criteria and state the disposition. Avoid unsupported terms such as “excellent.”
|
||||
- Include deviations, unresolved risks, required retests, responsible owner, and due date where applicable.
|
||||
- Update `Document History` for each issued revision.
|
||||
|
||||
## Figures and appendices
|
||||
|
||||
- Use project-relative paths such as `../Media/...` and `../Measurements/...`.
|
||||
- The image basename and content mapping is mandatory:
|
||||
- `I1`: overall linear-stage image; this is always the first image and must appear on page 1.
|
||||
- `I2`: encoder.
|
||||
- `I3`: motor or actuator.
|
||||
- `I4`: coupling.
|
||||
- `I5`: general FAT setup, view 1.
|
||||
- `I6`: general FAT setup, view 2.
|
||||
- The user must provide the images with these exact basenames. Accept only `.jpg`, `.jpeg`, `.png`, or `.pdf` extensions unless the template is explicitly revised.
|
||||
- Match image basenames case-sensitively in the report source. Do not use descriptive filenames, suffixes, or numbering variants such as `I1_stage`, `image1`, or `I01`.
|
||||
- Do not guess, rename, or substitute a different image when `I1` through `I6` is missing. Leave the generated missing-image placeholder visible, report the missing basename to the user, and wait for the correct file when the report is intended for issue.
|
||||
- Visually inspect all six images before accepting the mapping. A filename alone does not prove the content is correct.
|
||||
- Preserve original evidence files. Do not crop, edit, or overwrite source photographs or measurement PDFs unless explicitly authorized.
|
||||
- Confirm each figure label and every `\ref{...}` after compilation.
|
||||
- Attach every PDF in `../Measurements` at the end of the report as complete appendix pages. Preserve the original page content, list the PDFs in the same order as their inclusions, and use a logical evidence order such as positioning followed by horizontal and vertical straightness.
|
||||
- Scale appended PDF pages uniformly when necessary so that titles, plots, analysis tables, and page edges are fully visible. Do not annotate, crop, or alter the measurement PDFs.
|
||||
- Do not silently omit failed, superseded, or anomalous runs. Identify their status and explain their exclusion or disposition.
|
||||
|
||||
## Validation workflow
|
||||
|
||||
1. Compile the project-specific `.tex` file with the built-in LaTeX compiler when available. Otherwise, from `Report`, create a temporary `build` directory and use `pdflatex -interaction=nonstopmode -halt-on-error -synctex=0 -aux-directory=build <report>.tex`. This keeps `.aux` and `.log` files out of the main report folder and prevents `.synctex.gz` generation.
|
||||
2. Run at least two LaTeX passes when labels or references changed.
|
||||
3. Treat compilation, content verification, and visual verification as separate checks.
|
||||
4. Inspect the log for errors, undefined references, missing files, and overfull boxes.
|
||||
5. Render every report page to images and inspect margins, tables, line wrapping, headings, captions, page numbers, and appendix transitions.
|
||||
6. Confirm that every filename printed in the report exists in the evidence inventory.
|
||||
7. Search the final `.tex` and rendered PDF for `TBD`, placeholder instructions, and unintended filled checklist fields; none may remain.
|
||||
8. Confirm that every PDF from `../Measurements` is attached at the end and that no appended page is clipped.
|
||||
9. Confirm that no files outside `Report` were modified.
|
||||
10. After successful validation, remove the temporary `build` directory and all temporary render files. The main `Report` folder must not contain `.aux`, `.log`, `.synctex`, or QA image files.
|
||||
11. Keep the final project-specific `.tex`, final PDF, and `AGENTS.md` in the `Report` root. Create or retain `unused` and move superseded reports, unused templates, and report-only temporary artifacts there. Do not delete or move source evidence from adjacent folders.
|
||||
12. Deliver both the project-specific `.tex` source and compiled PDF. State the final page count, appended measurement PDFs, completed validation, and any unverified runtime, hardware, calibration, or deployment condition explicitly.
|
||||
|
||||
## Minimum completion criteria
|
||||
|
||||
A report is not complete until:
|
||||
|
||||
- no `TBD`, template instructions, or placeholder text remains;
|
||||
- all checklist response fields remain blank for the user;
|
||||
- exact hardware identity and source revisions are recorded;
|
||||
- acceptance criteria are traceable;
|
||||
- results and uncertainty are reported with units;
|
||||
- every conclusion is supported by evidence;
|
||||
- raw and analysis filenames are listed exactly;
|
||||
- images `I1` through `I6` exist, appear in the required order, and match their assigned subjects;
|
||||
- figures and captions match;
|
||||
- references resolve;
|
||||
- every PDF in `Measurements` is appended completely at the end without clipping;
|
||||
- the `Report` root contains no LaTeX auxiliary or temporary QA files;
|
||||
- the latest PDF compiles and passes full-page visual inspection; and
|
||||
- changes are confined to the authorized folder boundary.
|
||||
@@ -0,0 +1,323 @@
|
||||
\documentclass[11pt,a4paper]{article}
|
||||
\usepackage[T1]{fontenc}
|
||||
\usepackage[utf8]{inputenc}
|
||||
\usepackage{lmodern}
|
||||
\usepackage{microtype}
|
||||
\usepackage[a4paper,margin=22mm]{geometry}
|
||||
\usepackage{graphicx}
|
||||
\usepackage{tabularx}
|
||||
\usepackage{array}
|
||||
\usepackage{enumitem}
|
||||
\usepackage{amssymb}
|
||||
\usepackage{pdfpages}
|
||||
\usepackage{xurl}
|
||||
|
||||
\pagestyle{plain}
|
||||
\setlength{\parindent}{0pt}
|
||||
\setlength{\parskip}{0.5em}
|
||||
\renewcommand{\arraystretch}{1.3}
|
||||
\widowpenalty=10000
|
||||
\clubpenalty=10000
|
||||
|
||||
\newcommand{\TBD}{\textbf{TBD}}
|
||||
\newcommand{\StageModel}{\TBD}
|
||||
\newcommand{\EncoderModel}{\TBD}
|
||||
\newcommand{\MotorModel}{\TBD}
|
||||
\newcommand{\DriveModel}{\TBD}
|
||||
\newcommand{\EncoderInterface}{\TBD}
|
||||
\newcommand{\Controller}{\TBD}
|
||||
\newcommand{\MeasurementSystem}{\TBD}
|
||||
\newcommand{\TestLocation}{\TBD}
|
||||
\newcommand{\TestDates}{\TBD}
|
||||
\newcommand{\TestOperator}{\TBD}
|
||||
\newcommand{\TravelRange}{\TBD}
|
||||
\newcommand{\ReportVersion}{0.1}
|
||||
\newcommand{\ReportDate}{\today}
|
||||
|
||||
% Required image basenames in ../Media: I1 through I6.
|
||||
% Supported extensions: .jpg, .jpeg, .png, and .pdf.
|
||||
\newcommand{\imageorplaceholder}[2][55mm]{%
|
||||
\IfFileExists{#2.jpg}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.jpg}}{%
|
||||
\IfFileExists{#2.jpeg}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.jpeg}}{%
|
||||
\IfFileExists{#2.png}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.png}}{%
|
||||
\IfFileExists{#2.pdf}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.pdf}}{%
|
||||
\fbox{\parbox[c][#1][c]{0.92\linewidth}{\centering Required image not found\\\path{#2.[jpg|jpeg|png|pdf]}}}}}}}}
|
||||
|
||||
\newlength{\checklistitemwidth}
|
||||
\settowidth{\checklistitemwidth}{\small Measurement system calibrated}
|
||||
|
||||
\title{\textbf{Linear Stage Factory Acceptance Test Report}}
|
||||
\author{\TestLocation}
|
||||
\date{\TestDates}
|
||||
|
||||
\begin{document}
|
||||
\maketitle
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\begin{minipage}{0.90\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[65mm]{../Media/I1}
|
||||
\end{minipage}
|
||||
\caption{\StageModel\ linear stage during FAT testing}
|
||||
\label{fig:I1_stage}
|
||||
\end{figure}
|
||||
|
||||
\begin{tabularx}{\textwidth}{|l|X|}
|
||||
\hline
|
||||
\textbf{Equipment} & \StageModel \\ \hline
|
||||
\textbf{Encoder} & \EncoderModel \\ \hline
|
||||
\textbf{Motor} & \MotorModel \\ \hline
|
||||
\textbf{Drive} & \DriveModel \\ \hline
|
||||
\textbf{Location} & \TestLocation \\ \hline
|
||||
\textbf{Dates} & \TestDates \\ \hline
|
||||
\textbf{Operator} & \TestOperator \\ \hline
|
||||
\textbf{Applicable standards} & \TBD \\ \hline
|
||||
\end{tabularx}
|
||||
|
||||
\textbf{Executive summary:} \TBD. State the tested scope, achieved results, deviations, and disposition. Do not declare acceptance without traceable evidence.
|
||||
|
||||
\clearpage
|
||||
\section{FAT Checklists}
|
||||
|
||||
\subsection{Pre-Test Safety}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
2.1 & Risk assessment conducted & $\square$ & $\square$ & \\ \hline
|
||||
2.2 & Safety barriers in place & $\square$ & $\square$ & \\ \hline
|
||||
2.3 & E-stop functional & $\square$ & $\square$ & \\ \hline
|
||||
2.4 & Equipment grounded & $\square$ & $\square$ & \\ \hline
|
||||
2.5 & Personnel briefed & $\square$ & $\square$ & \\ \hline
|
||||
2.6 & Cable routing safe & $\square$ & $\square$ & \\ \hline
|
||||
2.7 & Environmental conditions OK & $\square$ & $\square$ & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\subsection{Equipment Verification}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
3.1 & Stage model verified & $\square$ & $\square$ & \\ \hline
|
||||
3.2 & Encoder model verified & $\square$ & $\square$ & \\ \hline
|
||||
3.3 & Motor model verified & $\square$ & $\square$ & \\ \hline
|
||||
3.4 & Drive model verified & $\square$ & $\square$ & \\ \hline
|
||||
3.5 & Encoder interface verified & $\square$ & $\square$ & \\ \hline
|
||||
3.6 & Measurement system calibrated & $\square$ & $\square$ & \\ \hline
|
||||
3.7 & Documentation available & $\square$ & $\square$ & \\ \hline
|
||||
3.8 & Calibration certificates valid & $\square$ & $\square$ & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\subsection{Mechanical and Electrical Checks}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
4.1 & Mounting interfaces verified & $\square$ & $\square$ & \\ \hline
|
||||
4.2 & Travel unobstructed & $\square$ & $\square$ & \\ \hline
|
||||
4.3 & End stops functional & $\square$ & $\square$ & \\ \hline
|
||||
4.4 & Cable carrier movement OK & $\square$ & $\square$ & \\ \hline
|
||||
4.5 & Encoder alignment checked & $\square$ & $\square$ & \\ \hline
|
||||
4.6 & Motor coupling secure & $\square$ & $\square$ & \\ \hline
|
||||
4.7 & Supply voltage verified & $\square$ & $\square$ & \\ \hline
|
||||
4.8 & Signal connections verified & $\square$ & $\square$ & \\ \hline
|
||||
4.9 & Ground continuity checked & $\square$ & $\square$ & \\ \hline
|
||||
4.10 & No abnormal noise or vibration & $\square$ & $\square$ & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\clearpage
|
||||
\subsection{Control System Verification}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
5.1 & Communication established & $\square$ & $\square$ & \\ \hline
|
||||
5.2 & Drive parameters verified & $\square$ & $\square$ & \\ \hline
|
||||
5.3 & Encoder scaling verified & $\square$ & $\square$ & \\ \hline
|
||||
5.4 & Current or force limit verified & $\square$ & $\square$ & \\ \hline
|
||||
5.5 & Homing or referencing functional & $\square$ & $\square$ & \\ \hline
|
||||
5.6 & Software limits configured & $\square$ & $\square$ & \\ \hline
|
||||
5.7 & E-stop response verified & $\square$ & $\square$ & \\ \hline
|
||||
5.8 & Motion profile verified & $\square$ & $\square$ & \\ \hline
|
||||
5.9 & Closed-loop stability verified & $\square$ & $\square$ & \\ \hline
|
||||
5.10 & Following error acceptable & $\square$ & $\square$ & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\subsection{Test Execution}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
6.1 & Measurement system aligned & $\square$ & $\square$ & \\ \hline
|
||||
6.2 & Environmental compensation set & $\square$ & $\square$ & \\ \hline
|
||||
6.3 & Test parameters recorded & $\square$ & $\square$ & \\ \hline
|
||||
6.4 & Required cycles completed & $\square$ & $\square$ & \\ \hline
|
||||
6.5 & Raw data saved & $\square$ & $\square$ & \\ \hline
|
||||
6.6 & Analysis files generated & $\square$ & $\square$ & \\ \hline
|
||||
6.7 & Environmental data logged & $\square$ & $\square$ & \\ \hline
|
||||
6.8 & All configurations tested & $\square$ & $\square$ & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\clearpage
|
||||
\section{Hardware and Configuration}
|
||||
\begin{tabularx}{\textwidth}{>{\bfseries}p{45mm}X}
|
||||
\hline
|
||||
Component & Verified specification \\ \hline
|
||||
Stage & \StageModel \\
|
||||
Travel & \TravelRange \\
|
||||
Encoder & \EncoderModel \\
|
||||
Encoder interface & \EncoderInterface \\
|
||||
Encoder resolution and scaling & \TBD \\
|
||||
Motor or actuator & \MotorModel \\
|
||||
Drive & \DriveModel \\
|
||||
Controller and control mode & \Controller \\
|
||||
Measurement system & \MeasurementSystem \\ \hline
|
||||
\end{tabularx}
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\begin{minipage}[b]{0.32\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[45mm]{../Media/I2}
|
||||
\caption{Encoder}
|
||||
\label{fig:I2_encoder}
|
||||
\end{minipage}
|
||||
\hfill
|
||||
\begin{minipage}[b]{0.32\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[45mm]{../Media/I3}
|
||||
\caption{Motor}
|
||||
\label{fig:I3_motor}
|
||||
\end{minipage}
|
||||
\hfill
|
||||
\begin{minipage}[b]{0.32\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[45mm]{../Media/I4}
|
||||
\caption{Motor coupling}
|
||||
\label{fig:I4_coupling}
|
||||
\end{minipage}
|
||||
\end{figure}
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\begin{minipage}[b]{0.48\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[65mm]{../Media/I5}
|
||||
\caption{General FAT setup - view 1}
|
||||
\label{fig:I5_setup1}
|
||||
\end{minipage}
|
||||
\hfill
|
||||
\begin{minipage}[b]{0.48\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[65mm]{../Media/I6}
|
||||
\caption{General FAT setup - view 2}
|
||||
\label{fig:I6_setup2}
|
||||
\end{minipage}
|
||||
\end{figure}
|
||||
|
||||
\clearpage
|
||||
\section{Test Description and Acceptance Criteria}
|
||||
\subsection{Applicable Standards and Procedures}
|
||||
\begin{itemize}
|
||||
\item \TBD: standard, edition, and applicable clauses
|
||||
\item \TBD: internal procedure and revision
|
||||
\item \TBD: measurement-system operating procedure and revision
|
||||
\end{itemize}
|
||||
|
||||
\subsection{Positioning Test}
|
||||
\begin{itemize}
|
||||
\item Travel and target positions: \TBD
|
||||
\item Number and direction of cycles: \TBD
|
||||
\item Velocity, acceleration, and settling criterion: \TBD
|
||||
\item Tested orientations and control modes: \TBD
|
||||
\item Accuracy and repeatability acceptance limits: \TBD
|
||||
\end{itemize}
|
||||
|
||||
\subsection{Straightness and Additional Tests}
|
||||
\begin{itemize}
|
||||
\item Straightness planes, range, and point spacing: \TBD
|
||||
\item Bidirectional repeatability, reversal error, and minimum incremental motion: \TBD
|
||||
\item Additional load, velocity, thermal, vibration, or endurance tests: \TBD
|
||||
\item Acceptance limits: \TBD
|
||||
\end{itemize}
|
||||
|
||||
\section{Environmental Conditions}
|
||||
\begin{tabularx}{\textwidth}{lXXXX}
|
||||
\hline
|
||||
Test & Temperature ($^\circ$C) & Pressure & Humidity (\%) & Notes \\ \hline
|
||||
Positioning & \TBD & \TBD & \TBD & \TBD \\
|
||||
Straightness & \TBD & \TBD & \TBD & \TBD \\
|
||||
Additional test & \TBD & \TBD & \TBD & \TBD \\ \hline
|
||||
\end{tabularx}
|
||||
|
||||
\clearpage
|
||||
\section{Test Files and Data}
|
||||
List every delivered file by exact basename. Add or remove entries to match the actual evidence set.
|
||||
|
||||
\subsection{Raw Files}
|
||||
\begin{itemize}
|
||||
\item \path{TBD_positioning_raw_file.ext}
|
||||
\item \path{TBD_straightness_raw_file.ext}
|
||||
\item \path{TBD_environment_log.ext}
|
||||
\end{itemize}
|
||||
|
||||
\subsection{Analysis Files}
|
||||
\begin{itemize}
|
||||
\item \path{TBD_positioning_analysis.pdf}
|
||||
\item \path{TBD_straightness_analysis.pdf}
|
||||
\end{itemize}
|
||||
|
||||
\section{Conclusions}
|
||||
\subsection{Positioning}
|
||||
\begin{itemize}
|
||||
\item Measured results and uncertainty: \TBD
|
||||
\item Acceptance criterion: \TBD
|
||||
\item Disposition: \TBD
|
||||
\end{itemize}
|
||||
|
||||
\subsection{Straightness and Additional Tests}
|
||||
\begin{itemize}
|
||||
\item Measured results and uncertainty: \TBD
|
||||
\item Acceptance criterion: \TBD
|
||||
\item Disposition: \TBD
|
||||
\end{itemize}
|
||||
|
||||
\subsection{Overall FAT Conclusion}
|
||||
\TBD. State accepted, conditionally accepted, or rejected; list deviations, open actions, owners, and due dates. Do not convert missing evidence into a passing result.
|
||||
|
||||
\section*{References}
|
||||
\begin{itemize}
|
||||
\item \TBD: stage manufacturer document, number, and revision
|
||||
\item \TBD: encoder, motor, drive, and controller documents and revisions
|
||||
\item \TBD: standards and procedures
|
||||
\item \TBD: calibration certificates
|
||||
\end{itemize}
|
||||
|
||||
\clearpage
|
||||
\section*{Document History}
|
||||
\begin{center}
|
||||
\begin{tabularx}{\textwidth}{|l|l|X|}
|
||||
\hline
|
||||
Date & Version & Description \\ \hline
|
||||
\ReportDate & \ReportVersion & Initial project-specific report generated from template \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\section*{Appendix: Measurement Analysis Files}
|
||||
List the attached analysis documents in their included order. Uncomment and replace each command only after confirming that the referenced PDF exists.
|
||||
|
||||
\begin{itemize}
|
||||
\item \path{TBD_positioning_analysis.pdf}
|
||||
\item \path{TBD_straightness_analysis.pdf}
|
||||
\end{itemize}
|
||||
|
||||
% Example:
|
||||
% \includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/TBD_positioning_analysis.pdf}
|
||||
|
||||
\end{document}
|
||||
@@ -0,0 +1,379 @@
|
||||
\documentclass[11pt,a4paper]{article}
|
||||
\usepackage[T1]{fontenc}
|
||||
\usepackage[utf8]{inputenc}
|
||||
\usepackage{lmodern}
|
||||
\usepackage{microtype}
|
||||
\usepackage[a4paper,margin=22mm]{geometry}
|
||||
\usepackage{graphicx}
|
||||
\usepackage{tabularx}
|
||||
\usepackage{array}
|
||||
\usepackage{enumitem}
|
||||
\usepackage{amssymb}
|
||||
\usepackage{pdfpages}
|
||||
\usepackage{xurl}
|
||||
|
||||
\pagestyle{plain}
|
||||
\setlength{\parindent}{0pt}
|
||||
\setlength{\parskip}{0.5em}
|
||||
\renewcommand{\arraystretch}{1.3}
|
||||
\widowpenalty=10000
|
||||
\clubpenalty=10000
|
||||
|
||||
\newcommand{\StageModel}{}
|
||||
\newcommand{\EncoderModel}{TR-Electronic LT140-S, Art. No. 3200-00011, S/N 0129}
|
||||
\newcommand{\MotorModel}{}
|
||||
\newcommand{\DriveModel}{Beckhoff EL7041, EL7062 and ED7062 variants tested}
|
||||
\newcommand{\EncoderInterface}{Beckhoff EL5042 SSI interface}
|
||||
\newcommand{\Controller}{ECMC/EPICS over EtherCAT; 500 Hz configuration}
|
||||
\newcommand{\MeasurementSystem}{Keysight laser-interferometer analysis files; instrument identity and calibration status not supplied}
|
||||
\newcommand{\TestLocation}{Mechatronics Lab}
|
||||
\newcommand{\TestDates}{27 August to 8 September 2026}
|
||||
\newcommand{\TestOperator}{Henrique}
|
||||
\newcommand{\TravelRange}{90 mm tested range; stage nominal model and travel not identified}
|
||||
\newcommand{\ReportVersion}{1.0}
|
||||
\newcommand{\ReportDate}{13 October 2026}
|
||||
|
||||
\newcommand{\imageorplaceholder}[2][55mm]{%
|
||||
\IfFileExists{#2.jpg}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.jpg}}{%
|
||||
\IfFileExists{#2.jpeg}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.jpeg}}{%
|
||||
\IfFileExists{#2.png}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.png}}{%
|
||||
\IfFileExists{#2.pdf}{\includegraphics[width=\linewidth,height=#1,keepaspectratio]{#2.pdf}}{%
|
||||
\fbox{\parbox[c][#1][c]{0.92\linewidth}{\centering Required image not found\\\path{#2.[jpg|jpeg|png|pdf]}}}}}}}}
|
||||
|
||||
\newlength{\checklistitemwidth}
|
||||
\settowidth{\checklistitemwidth}{\small Measurement system calibrated}
|
||||
|
||||
\title{\textbf{Linear Stage Factory Acceptance Test Report}}
|
||||
\author{\TestLocation}
|
||||
\date{\TestDates}
|
||||
|
||||
\begin{document}
|
||||
\maketitle
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\begin{minipage}{0.90\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[65mm]{../Media/I1}
|
||||
\end{minipage}
|
||||
\caption{OWIS linear-stage assembly used for the FAT campaign}
|
||||
\label{fig:I1_stage}
|
||||
\end{figure}
|
||||
|
||||
\begin{tabularx}{\textwidth}{|l|X|}
|
||||
\hline
|
||||
\textbf{Equipment} & OWIS linear stage; exact model not identified in the supplied evidence \\ \hline
|
||||
\textbf{Encoder} & \EncoderModel \\ \hline
|
||||
\textbf{Motor} & Installed VEXTA PK-series stepper motor; exact model not legible in the supplied evidence \\ \hline
|
||||
\textbf{Drive} & \DriveModel \\ \hline
|
||||
\textbf{Location} & \TestLocation \\ \hline
|
||||
\textbf{Dates} & \TestDates \\ \hline
|
||||
\textbf{Operator} & \TestOperator \\ \hline
|
||||
\textbf{Applicable method} & ISO 230-2:2014 (Modified) as identified by the positioning analysis files; straightness files identify ISO 230-2:1997 \\ \hline
|
||||
\end{tabularx}
|
||||
|
||||
\textbf{Executive summary:} The supplied evidence documents comparative positioning and straightness measurements on an OWIS linear-stage assembly under several ECMC/EtherCAT drive configurations. The strongest comparable 90 mm positioning result was the EL7062 closed-loop S-curve run with a 0.2 mm positive-direction approach: bidirectional positioning accuracy $A=7.3211~\mu$m, repeatability $R=1.6524~\mu$m, and maximum reversal error $B=1.1254~\mu$m. A separate 10--11 mm fine-step run returned $A=4.1456~\mu$m and is not a full-travel result. No contractual acceptance limits, traceable calibration certificates, or complete uncertainty budget were supplied; therefore this report records results and limitations but does not declare formal acceptance.
|
||||
|
||||
\clearpage
|
||||
\section{FAT Checklists}
|
||||
The response cells are intentionally blank for completion and approval by authorized personnel.
|
||||
|
||||
\subsection{Pre-Test Safety}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
2.1 & Risk assessment conducted & & & \\ \hline
|
||||
2.2 & Safety barriers in place & & & \\ \hline
|
||||
2.3 & E-stop functional & & & \\ \hline
|
||||
2.4 & Equipment grounded & & & \\ \hline
|
||||
2.5 & Personnel briefed & & & \\ \hline
|
||||
2.6 & Cable routing safe & & & \\ \hline
|
||||
2.7 & Environmental conditions OK & & & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\subsection{Equipment Verification}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
3.1 & Stage model verified & & & \\ \hline
|
||||
3.2 & Encoder model verified & & & \\ \hline
|
||||
3.3 & Motor model verified & & & \\ \hline
|
||||
3.4 & Drive model verified & & & \\ \hline
|
||||
3.5 & Encoder interface verified & & & \\ \hline
|
||||
3.6 & Measurement system calibrated & & & \\ \hline
|
||||
3.7 & Documentation available & & & \\ \hline
|
||||
3.8 & Calibration certificates valid & & & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\subsection{Mechanical and Electrical Checks}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
4.1 & Mounting interfaces verified & & & \\ \hline
|
||||
4.2 & Travel unobstructed & & & \\ \hline
|
||||
4.3 & End stops functional & & & \\ \hline
|
||||
4.4 & Cable carrier movement OK & & & \\ \hline
|
||||
4.5 & Encoder alignment checked & & & \\ \hline
|
||||
4.6 & Motor coupling secure & & & \\ \hline
|
||||
4.7 & Supply voltage verified & & & \\ \hline
|
||||
4.8 & Signal connections verified & & & \\ \hline
|
||||
4.9 & Ground continuity checked & & & \\ \hline
|
||||
4.10 & No abnormal noise or vibration & & & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\clearpage
|
||||
\subsection{Control System Verification}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
5.1 & Communication established & & & \\ \hline
|
||||
5.2 & Drive parameters verified & & & \\ \hline
|
||||
5.3 & Encoder scaling verified & & & \\ \hline
|
||||
5.4 & Current or force limit verified & & & \\ \hline
|
||||
5.5 & Homing or referencing functional & & & \\ \hline
|
||||
5.6 & Software limits configured & & & \\ \hline
|
||||
5.7 & E-stop response verified & & & \\ \hline
|
||||
5.8 & Motion profile verified & & & \\ \hline
|
||||
5.9 & Closed-loop stability verified & & & \\ \hline
|
||||
5.10 & Following error acceptable & & & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\subsection{Test Execution}
|
||||
\begin{center}\small
|
||||
\begin{tabularx}{\textwidth}{|p{8mm}|p{\checklistitemwidth}|c|c|X|}
|
||||
\hline
|
||||
\textbf{Item} & \textbf{Checklist Item} & \textbf{Yes} & \textbf{No} & \textbf{Remarks} \\ \hline
|
||||
6.1 & Measurement system aligned & & & \\ \hline
|
||||
6.2 & Environmental compensation set & & & \\ \hline
|
||||
6.3 & Test parameters recorded & & & \\ \hline
|
||||
6.4 & Required cycles completed & & & \\ \hline
|
||||
6.5 & Raw data saved & & & \\ \hline
|
||||
6.6 & Analysis files generated & & & \\ \hline
|
||||
6.7 & Environmental data logged & & & \\ \hline
|
||||
6.8 & All configurations tested & & & \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\clearpage
|
||||
\section{Hardware and Configuration}
|
||||
\begin{tabularx}{\textwidth}{>{\bfseries}p{45mm}X}
|
||||
\hline
|
||||
Component & Verified specification \\ \hline
|
||||
Stage & OWIS screw-driven linear stage; exact model not identified \\
|
||||
Travel & \TravelRange \\
|
||||
Encoder & \EncoderModel; 140 mm measuring length; 0.1 $\mu$m resolution; SSI, 24-bit binary; 8--27 V nameplate supply \\
|
||||
Encoder interface & \EncoderInterface; source configuration requests 24-bit binary SSI and 1 MHz clock \\
|
||||
Encoder scaling & Source configuration uses 0.0001 mm/count and an absolute offset of $-11.826$ mm \\
|
||||
Motor or actuator & Installed VEXTA PK-series stepper motor; exact model not established \\
|
||||
Drive & \DriveModel \\
|
||||
Controller and control mode & \Controller; tested open-loop and encoder-closed-loop variants with trapezoidal and S-curve profiles \\
|
||||
Measurement system & \MeasurementSystem \\ \hline
|
||||
\end{tabularx}
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\begin{minipage}[b]{0.32\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[45mm]{../Media/I2}
|
||||
\caption{TR-Electronic LT140-S encoder nameplate}
|
||||
\label{fig:I2_encoder}
|
||||
\end{minipage}
|
||||
\hfill
|
||||
\begin{minipage}[b]{0.32\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[45mm]{../Media/I3}
|
||||
\caption{Installed VEXTA PK-series stepper motor}
|
||||
\label{fig:I3_motor}
|
||||
\end{minipage}
|
||||
\hfill
|
||||
\begin{minipage}[b]{0.32\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[45mm]{../Media/I4}
|
||||
\caption{Motor-to-screw coupling}
|
||||
\label{fig:I4_coupling}
|
||||
\end{minipage}
|
||||
\end{figure}
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\begin{minipage}[b]{0.48\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[65mm]{../Media/I5}
|
||||
\caption{General FAT setup with interferometer and stage}
|
||||
\label{fig:I5_setup1}
|
||||
\end{minipage}
|
||||
\hfill
|
||||
\begin{minipage}[b]{0.48\textwidth}
|
||||
\centering
|
||||
\imageorplaceholder[65mm]{../Media/I6}
|
||||
\caption{General FAT setup close view}
|
||||
\label{fig:I6_setup2}
|
||||
\end{minipage}
|
||||
\end{figure}
|
||||
|
||||
\clearpage
|
||||
\section{Test Description and Acceptance Criteria}
|
||||
\subsection{Applicable Standards and Procedures}
|
||||
The positioning result sheets identify ISO 230-2:2014 (Modified), algebraic error sign, and coverage factor 2. The straightness result sheets identify ISO 230-2:1997 and coverage factor 2. No approved project procedure, contractual acceptance limits, calibration certificates, or complete measurement-uncertainty budget were supplied. The recorded metrics can therefore be compared with each other, but not used for contractual acceptance.
|
||||
|
||||
\subsection{Positioning Test}
|
||||
Most positioning files use ten target positions over approximately 1--90 mm and five forward/reverse cycles. The supplied files record 120 mm/min feed rate and dwell values of approximately 3--4 s for the earlier campaigns. Later gap-controlled sequences use 2 mm/s commanded velocity, 3 mm/s$^2$ acceleration, and a preliminary approach point before each measurement position. The best reported run used a 0.2 mm positive-direction preliminary approach. A separate fine-step run covers only 10--11 mm and must not be interpreted as full-travel performance.
|
||||
|
||||
\subsection{Straightness and Additional Tests}
|
||||
Horizontal XZ and vertical YZ straightness result sheets cover the 0--90 mm range and identify ED7062 CSP with EL5042 feedback. The rendered sheets label deviation and numerical results in micrometres. No project acceptance limits or complete uncertainty budget were supplied, so the report records the measured values without declaring conformance.
|
||||
|
||||
\section{Environmental Conditions}
|
||||
\begin{tabularx}{\textwidth}{lXXXX}
|
||||
\hline
|
||||
Test & Temperature ($^\circ$C) & Pressure (mmHg) & Humidity (\%) & Notes \\ \hline
|
||||
Best 90 mm positioning run & 22.38--22.41 & 736.1--736.2 & 42--43 & Material sensors 22.56--22.59 and 22.77--23.07 $^\circ$C \\
|
||||
Horizontal straightness & 22.06--22.14 & 732.2--732.5 & 57--58 & Material sensors 22.29--22.36 and 22.02--22.13 $^\circ$C \\
|
||||
Vertical straightness & 22.45--22.52 & 730.0--730.7 & 55 & Material sensors 22.65--22.72 and 22.37--22.44 $^\circ$C \\ \hline
|
||||
\end{tabularx}
|
||||
|
||||
\clearpage
|
||||
\section{Positioning Results}
|
||||
\begin{center}\scriptsize
|
||||
\begin{tabularx}{\textwidth}{|X|r|r|r|r|r|}
|
||||
\hline
|
||||
\textbf{Configuration and scope} & \textbf{$A$ ($\mu$m)} & \textbf{$E$ ($\mu$m)} & \textbf{$M$ ($\mu$m)} & \textbf{$R$ ($\mu$m)} & \textbf{max $B$ ($\mu$m)} \\ \hline
|
||||
EL7041 closed loop, S-curve, 89.3 mm & 12.9155 & 9.9679 & 9.3136 & 6.0430 & 1.5967 \\ \hline
|
||||
EL7041 closed loop, trapezoidal, 90 mm & 7.5989 & 6.0386 & 5.9269 & 2.6739 & 1.5143 \\ \hline
|
||||
EL7041 open loop, trapezoidal, 90 mm & 24.8280 & 20.8842 & 19.0523 & 8.4932 & 5.6624 \\ \hline
|
||||
EL7041 DC closed loop, trapezoidal, 90 mm & 7.7985 & 6.3297 & 6.1324 & 2.2667 & 1.1797 \\ \hline
|
||||
EL7041 DC open loop, trapezoidal, 90 mm & 13.9195 & 10.2204 & 4.3243 & 10.7227 & 7.5308 \\ \hline
|
||||
EL7041 DC closed loop, S-curve, 90 mm & 11.9568 & 9.0849 & 7.9591 & 4.9041 & 2.7315 \\ \hline
|
||||
EL7062 closed loop, S-curve, 90 mm & 10.4298 & 8.9517 & 6.9815 & 4.1907 & 2.5880 \\ \hline
|
||||
EL7062 open loop, S-curve, 90 mm & 22.7101 & 18.6696 & 17.5019 & 8.1442 & 4.2550 \\ \hline
|
||||
EL7062 open loop, trapezoidal, 90 mm & 21.4864 & 18.8733 & 17.9853 & 5.6532 & 3.9325 \\ \hline
|
||||
EL7062 DC open loop, trapezoidal, 90 mm & 8.5891 & 6.1477 & 4.1465 & 6.1303 & 3.7104 \\ \hline
|
||||
EL7062 DC closed loop, trapezoidal, 90 mm & 12.2126 & 9.8056 & 8.2630 & 4.9802 & 2.7991 \\ \hline
|
||||
EL7062 DC closed loop, S-curve, 90 mm & 12.2173 & 9.8419 & 8.2988 & 5.7420 & 3.0251 \\ \hline
|
||||
EL7062 DC closed loop, S-curve, 0.2 mm approach, 90 mm & \textbf{7.3211} & 6.9837 & 6.7060 & \textbf{1.6524} & 1.1254 \\ \hline
|
||||
EL7062 CSV DC closed loop, S-curve approach, 90 mm & 9.4819 & 6.9473 & 6.7269 & 2.8791 & \textbf{0.7820} \\ \hline
|
||||
ED7062 CSP DC closed loop, S-curve approach, 90 mm & 8.6922 & 6.9325 & 6.5272 & 2.7306 & 0.7903 \\ \hline
|
||||
ED7062 CSV DC closed loop, S-curve approach, 90 mm & 9.2284 & 7.0082 & 6.6240 & 3.6663 & 0.8462 \\ \hline
|
||||
EL7062 DC closed loop, S-curve, 20 $\mu$m steps, 10--11 mm & 4.1456 & 1.3173 & 0.9411 & 4.1456 & 1.1760 \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
The EL7062 DC closed-loop S-curve run with a 0.2 mm final approach produced the lowest full-travel $A$ value and the lowest full-travel $R$ value in the supplied set. Relative to the otherwise similar EL7062 DC closed-loop S-curve run without the documented approach gap, $A$ decreased from 12.2173 to 7.3211 $\mu$m and $R$ decreased from 5.7420 to 1.6524 $\mu$m. This supports use of a controlled final approach direction for repeatable positioning in this dataset. It does not establish compliance with an unspecified acceptance limit.
|
||||
|
||||
\section{Straightness Results}
|
||||
The horizontal XZ sheet reports $A=10.3~\mu$m, $E=3.2~\mu$m, $M=1.9~\mu$m, $R=9.6~\mu$m, and maximum $B=2.0~\mu$m. The vertical YZ sheet reports $A=4.8~\mu$m, $E=1.4~\mu$m, $M=1.0~\mu$m, $R=4.4~\mu$m, and maximum $B=0.5~\mu$m. Both original sheets are appended unchanged. Disposition against project requirements remains open because no acceptance limits were supplied.
|
||||
|
||||
\section{Test Files and Data}
|
||||
\subsection{Raw and Environmental Files}
|
||||
\begin{itemize}[leftmargin=*]
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_ED7062_CSP_EL5042_DC_ClosedLoop_SCurve_gap.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_ED7062_CSV_EL5042_DC_ClosedLoop_SCurve_gap.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_SCurve.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_Trapezoidal.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_openLoop_Trapezoidal.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_Trapezoidal.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_openLoop_Trapezoidal.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_CSV_EL5042_DC_ClosedLoop_SCurve_gap.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_CSV_EL5042_DC_ClosedLoop_Trapezoidal_gap.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve_SmallSteps.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve_gap.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_Trapezoidal.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_OpenLoop_Trapezoidal.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_openLoop.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_openLoop_Trapezoidal.Lin}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_Straightness_Horizontal_XZ.Str}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_Straightness_Vertical_YZ.Str}
|
||||
\item \path{FromRest_ED7062_CSP_almemo_20260907_083344.csv}
|
||||
\item \path{FromRest_almemo_20260907_083344.csv}
|
||||
\item \path{StraightnessTest_StageExtrems_almemo_20260908_094213.csv}
|
||||
\end{itemize}
|
||||
|
||||
\subsection{Analysis Files}
|
||||
The following 19 PDF basenames are appended in the order listed below. The file \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_CSV_EL5042_DC_ClosedLoop_Trapezoidal_gap.Lin} has no corresponding PDF in the supplied evidence and is retained in the raw-file inventory.
|
||||
|
||||
\begin{enumerate}[leftmargin=*]
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_ED7062_CSP_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_ED7062_CSV_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_SCurve.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_Trapezoidal.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_openLoop_Trapezoidal.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_Trapezoidal.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_openLoop_Trapezoidal.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_CSV_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve_SmallSteps.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_Trapezoidal.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_OpenLoop_Trapezoidal.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_openLoop.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_openLoop_Trapezoidal.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_Straightness_Horizontal_XZ.pdf}
|
||||
\item \path{OWIS_stageTR_Electronics_FAT_Straightness_Vertical_YZ.pdf}
|
||||
\end{enumerate}
|
||||
|
||||
\section{Conclusions}
|
||||
\subsection{Positioning}
|
||||
The strongest comparable full-travel positioning result is the EL7062 DC closed-loop S-curve run with a 0.2 mm positive-direction approach: $A=7.3211~\mu$m, $E=6.9837~\mu$m, $M=6.7060~\mu$m, $R=1.6524~\mu$m, and maximum $B=1.1254~\mu$m. The measurement files report a coverage factor of 2, but the supplied evidence does not contain the calibration and alignment information needed for a complete uncertainty budget. Disposition: recorded result; formal acceptance is not determined because no acceptance limit was supplied.
|
||||
|
||||
\subsection{Straightness and Additional Tests}
|
||||
Horizontal XZ and vertical YZ straightness datasets and analysis sheets are present, with measured accuracies of 10.3 $\mu$m and 4.8 $\mu$m respectively. The environmental records show measurable temperature variation during the campaigns and do not establish long-term thermal equilibrium. Disposition: results retained; formal acceptance is not determined because no acceptance limits or complete uncertainty budget were supplied.
|
||||
|
||||
\subsection{Overall FAT Conclusion}
|
||||
The supplied campaign demonstrates controlled motion and repeatable measured positioning under several configurations, with the best full-travel result obtained using closed-loop S-curve motion and a controlled final approach. Formal FAT acceptance is not established. Required actions are: the project owner shall define contractual positioning and straightness limits; the metrology owner shall provide calibration and uncertainty evidence; the controls owner shall confirm the installed drive firmware, encoder supply voltage, limit functions, and execute/busy/at-target sequence on the live system; and the mechanical owner shall record the exact stage and motor models. Owners and due dates require assignment by the project.
|
||||
|
||||
\section*{References}
|
||||
\begin{itemize}
|
||||
\item Supplied Keysight positioning and straightness raw files and analysis PDFs in \path{Measurements}, dated 27 August to 8 September 2026.
|
||||
\item ECMC source configurations and local READMEs in \path{ECMC/EL7041}, \path{ECMC/EL7062_CSP}, \path{ECMC/EL7062_CSP_PC}, \path{ECMC/EL7062_CSV}, \path{ECMC/ED7062_CSP}, and \path{ECMC/ED7062_CSV}.
|
||||
\item TR-Electronic LT140-S encoder nameplate photograph and supplied encoder documentation in \path{Encoder}.
|
||||
\item Oriental Motor Co., Ltd., \emph{2-Phase/5-Phase Stepping Motors PK Series Operating Manual}, HM-7471E.
|
||||
\item FAT setup images \path{I1.jpg} through \path{I6.jpg} in \path{Media}.
|
||||
\end{itemize}
|
||||
|
||||
\clearpage
|
||||
\section*{Document History}
|
||||
\begin{center}
|
||||
\begin{tabularx}{\textwidth}{|l|l|X|}
|
||||
\hline
|
||||
Date & Version & Description \\ \hline
|
||||
\ReportDate & \ReportVersion & Project-specific FAT report issued from the controlled linear-stage report template \\ \hline
|
||||
\end{tabularx}
|
||||
\end{center}
|
||||
|
||||
\clearpage
|
||||
\section*{Appendix: Measurement Analysis Files}
|
||||
The following pages reproduce every PDF found in \path{Measurements} at compilation time, in the evidence order listed in the preceding section.
|
||||
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_ED7062_CSP_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_ED7062_CSV_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_SCurve.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_Trapezoidal.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_DC_openLoop_Trapezoidal.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_Trapezoidal.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7041_EL5042_openLoop_Trapezoidal.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_CSV_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve_SmallSteps.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_SCurve_gap.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_ClosedLoop_Trapezoidal.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_DC_OpenLoop_Trapezoidal.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_openLoop.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_ISO230_Stepper_EL7062_EL5042_openLoop_Trapezoidal.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_Straightness_Horizontal_XZ.pdf}
|
||||
\includepdf[pages=-,fitpaper=true,pagecommand={\pagestyle{plain}}]{../Measurements/OWIS_stageTR_Electronics_FAT_Straightness_Vertical_YZ.pdf}
|
||||
|
||||
\end{document}
|
||||